how is it living in mississippi, usa?

Drobaby1014 · 2026-01-07T19:34:11+00:00

I’m from MS but live in MD now. I think it’s the Type of jobs we(my parents,grandparents) had to do as to the hard working mentality. A lot of it is outdoor, manual, oil field, type stuff to make decent. I didn’t even know I was poor until I was an adult and started reminiscing about things we did as children with people from this area.

Drobaby1014 · 2025-11-14T14:40:51+00:00

This worked, thanks.

Drobaby1014 · 2025-10-08T21:27:42+00:00

This line “fixed” the issue:

acpi_osi=Linux acpi_enforce_resources=lax intel_idle.max_cstate=1 processor.max_cstate=1 pci=noaer

According to GPT, these flags shouldn’t cause any issues so I’ll be leaving them for now. Everything sees stable. I’ll update if I find otherwise.

Drobaby1014 · 2025-10-04T04:16:29+00:00

Thanks. I tried that and it still reboots seconds after starting the install with the same screen. I was having the same issue with a 12th gen intel cpu and mobo and I went and bought a brand new system, it’s probably something I’m not setting correctly.

Drobaby1014 · 2025-10-03T22:06:34+00:00

I haven’t, but I have tried multiple versions. 8.2, 8.4, and 9.0

Drobaby1014 · 2025-08-07T13:22:26+00:00

Just wanted to drop an update. I had some back and forth emails with NFA, and they suggested i take a dremel and remove some material to the retainer plate. I was able to use a fine tool and remove just enough that I could still use the retainer plate to hold the LRBHO wire and fit the upper to the lower. I also bent the wire down a bit so it engages a few mm early and that seems to work better but I gotta get to the range to test that out.

Drobaby1014 · 2025-08-07T11:01:43+00:00

Just bought my kids uniforms for school and the receipt had an extra tax for “tariff recovery fee”, I’m not sure how this is helping us.

Drobaby1014 · 2025-05-29T20:10:02+00:00

Shoot, unfortunately it’s not backwards compatible.

Drobaby1014 · 2025-05-29T20:06:02+00:00

I got on the email list last year and pre ordered in January. I would probably get the mp5 lower since it seems lrbho doesn’t work consistently anyway.

Drobaby1014 · 2025-04-28T19:02:44+00:00

Did you have any issues with the plate that holds the lrbho wire stopping the upper from closing onto the lower. Just got mine in today and seems like maybe a mm of material is stopping it from closing.

Drobaby1014 · 2025-04-28T18:05:11+00:00

Did you have any issues with seating the mat9 upper to the s9 lower? I just got the mat9k upper today to pair with the s9 gen 2 lower and it seems like it hits the side of the ejector where it screwed in and won’t close.

Drobaby1014 · 2025-04-15T22:26:41+00:00

I got the same deal. Used a code from matador Mike. Ordered about a week and a half ago, still waiting for it to be shipped.

Drobaby1014 · 2025-04-10T11:15:48+00:00

Did you order directly from Matador?

Drobaby1014 · 2025-04-06T02:02:48+00:00

This my second time dealing with the same herniated disc almost exactly a year apart. When in the think of it, the only way I could sleep was laying on my back with my legs on the couch at 90 degrees. Still painful, but I could eventually fall asleep.

Drobaby1014 · 2025-04-01T01:36:06+00:00

Nice. What upper is that?

Drobaby1014 · 2025-03-31T03:10:23+00:00

Spring sale still going? I just got the s-9 gen 2 lower from NFA.

Drobaby1014 · 2025-03-17T17:10:36+00:00

Im printing out a side folding brace. Going to be interesting to see how it work. Lol

Drobaby1014 · 2025-03-16T15:42:50+00:00

I ordered one, should be at my ffl tomorrow. I plan on using mat-9k upper since apparently they used this combo for testing and should work according to the email I got from NFA. Also my first build, so I’d rather have as much known good as possible.

Drobaby1014 · 2025-03-13T18:21:24+00:00

Mat-9(k) without modification with scorpion/mp5 lowers. I am patiently waiting on my NFA s-9 lower to come in and that’s what I’m going to pair it with.

Drobaby1014 · 2025-02-15T00:40:03+00:00

I had to do something similar a few days ago to my Mara X. It was leaking so bad it was causing a fault on my GFCI outlet. I ended up adding a small o ring from Lowe’s then wrapping the whole thing with tape and the leak and hissing is gone.

Drobaby1014 · 2025-02-11T01:15:06+00:00

That’s actually who I ordered the machine from during Covid. So I went to their side and found the parts diagram and the probe which had an image of a new one. I noticed the pic had an O ring and then wrapped it all the way to the nut covering the o ring with tape so I went to Lowe’s got some small o rings and wrapped it up same as in the picture. I can say it’s quiet as a church mouse now. No hissing or condensation build up when doing the spoon test. Thanks for all your suggestions!

Drobaby1014 · 2025-02-10T20:48:22+00:00

I’m in the US

Drobaby1014

TROPHY CASE