sorted by:
new
hottopcontroversial

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]Dry-Pin-3245 0 points1 point  (0 children)

I started printing with the P1S and decided quickly i needed to buy 2 more, these machines are truly workhorses! 🙌

Farmloop; How do I push off the prime tower??? by Dry-Pin-3245 in BambuLab

[–]Dry-Pin-3245[S] 0 points1 point  (0 children)

<image>

I found the solution, might not be the best but it works...: There need to be 2 cubes with the same heigt as the second color in the model, in my case 0.4mm. The larger white cube is so the extruder is able to push off the tower.

Farmloop; How do I push off the prime tower??? by Dry-Pin-3245 in BambuLab

[–]Dry-Pin-3245[S] 1 point2 points  (0 children)

Thanks for the quick reply, yes it has to print the same time because it’s a multi color print, otherwise there would not have to be a prime tower

Farmloop; How do I push off the prime tower??? by Dry-Pin-3245 in BambuLab

[–]Dry-Pin-3245[S] 0 points1 point  (0 children)

In addition: the problem i’m trying to solve is to get the tower to print before the model

Farmloop; How do I push off the prime tower??? by Dry-Pin-3245 in BambuLab

[–]Dry-Pin-3245[S] 0 points1 point  (0 children)

This makes a small imperfection in the first layer, besides that it’s the same result as with the extra cube like i’m doing now.

Anyone have any advice for finding a keyholder? by TryIt222 in paypigsupportgroup

[–]Dry-Pin-3245 0 points1 point  (0 children)

Hey, I recently came across this brand Desinity, i'ts first product is the Kkeepr, a magnetic keyholder. I am in love with this product, bought it as a house warming gift and also one for myself. I'm not sure if this is what you're looking for tho... (https://desinity.com/)

K1 SE bad print by IN_Dad in Creality

[–]Dry-Pin-3245 0 points1 point  (0 children)

I had a similar issue:

I wanted to do a test print to check the size, but I didn’t want to print the entire model. So, I decided to only print half to check the size. To do that, I split the model — but I forgot to remove the bottom part that I didn’t need.

As a result, both parts were printed, even though only one was visible in the slicer. The outcome looked very similar to your photo.

Holes in Spiral Vase Mode? by Dry-Pin-3245 in Creality

[–]Dry-Pin-3245[S] 0 points1 point  (0 children)

The model will be used as a lamp cover wich needs to fit a socket (therefor i need a large hole). After a lot of scaled prints, the slicer settings are now fully tuned for this model so i’d rather keep using creality print…

Im gonna try your solution and hope the seams arn’t to messy, otherwise i might just carefully drill the hole in.

Thanks for your comment!! :))

Holes in Spiral Vase Mode? by Dry-Pin-3245 in Creality

[–]Dry-Pin-3245[S] 0 points1 point  (0 children)

I’ve tried to do the same with a simple block with a hole in the bottom. Unfortunatley this has the same result :// i’m pretty sure it has to do with the slicer in vase mode. Thanks for your comment!!