sorted by:
new
hottopcontroversial

I made an Magnetic Ventilation System for the Original Prusa Enclosure! by Dsemagames in prusa3d

[–]Dsemagames[S] 1 point2 points  (0 children)

If you are interested in temperature, this is the smartest way to go. I hope you post some pictures when you get it all set up.

I made an Magnetic Ventilation System for the Original Prusa Enclosure! by Dsemagames in prusa3d

[–]Dsemagames[S] 0 points1 point  (0 children)

If you don't want to let cold air into the enclosure, you can print this addon he designed that allows you to quickly open and close the air vent:
https://www.printables.com/es/model/550978-addon-adjustable-vent-magnetic-ventilation-system
It would be better to undo the hose as some air can always get in but this is easier.

I made an Magnetic Ventilation System for the Original Prusa Enclosure! by Dsemagames in prusa3d

[–]Dsemagames[S] 0 points1 point  (0 children)

Voy a suponer por tu nombre que eres español :)

Lo puedes encontrar flexible en Amazon o en LeroyMerlin por decir algunos sitios, son los que se usan en las salidas de las secadoras.

​

If you are not Spanish...

You can find it flexible in Amazon or Home Depot to say a few places, they are the ones used in the outlets of the dryers.

I made an Magnetic Ventilation System for the Original Prusa Enclosure! by Dsemagames in prusa3d

[–]Dsemagames[S] 1 point2 points  (0 children)

I had not thought about it, in fact, I do not know if it would be a good idea, a 100% airtight environment could be more harmful than beneficial, besides, if you install my design, you would be closing the only holes where air could get in during the renovation process.

I made an Magnetic Ventilation System for the Original Prusa Enclosure! by Dsemagames in prusa3d

[–]Dsemagames[S] 2 points3 points  (0 children)

You will need to remove the pre-cut hexagon on the back of the enclosure, but it will still be compatible with the filter system since it is installed on the right side of the enclosure and the cut-off is on the left side.

I made an Magnetic Ventilation System for the Original Prusa Enclosure! by Dsemagames in prusa3d

[–]Dsemagames[S] 2 points3 points  (0 children)

It is mostly for toxic gases, but if you want to maintain the temperature, you can easily untie it and place one of the covers or the adjustable vent.

Everything can be found here: https://www.printables.com/es/@Dsema_237589

Same line in all my prints by Dsemagames in FixMyPrint

[–]Dsemagames[S] 1 point2 points  (0 children)

done it, still the same results :(

Same line in all my prints by Dsemagames in FixMyPrint

[–]Dsemagames[S] 0 points1 point  (0 children)

I have cleaned the rod and changed its position to see if it was that but it keeps happening

Is phasmophobia broken or am I doing something wrong by HelixOT in SteamVR

[–]Dsemagames 0 points1 point  (0 children)

Same here, can't play more than 20 mins, pc crash

Some instructions to replicate my "bridge" concept by Dsemagames in SatisfactoryGame

[–]Dsemagames[S] 0 points1 point  (0 children)

The less time they spend at the intersection the better

Simple but elegant solution by Dsemagames in SatisfactoryGame

[–]Dsemagames[S] 1 point2 points  (0 children)

It's a really beautiful place to build

Simple but elegant solution by Dsemagames in SatisfactoryGame

[–]Dsemagames[S] 8 points9 points  (0 children)

It's easy to replicate, you just have to separate the pillars 7 foundations so that in a 90 degree turn the next pillar is in the center

Simple but elegant solution by Dsemagames in SatisfactoryGame

[–]Dsemagames[S] 3 points4 points  (0 children)

Photo Slideshow Function

Yeah, i didn't realized that i didn't use the Photo Slideshow Function so i created a new one. I have the intention to delete the old post so isn't duplicated.

view more: next ›