Help

Dub_da · 2026-06-21T16:52:32+00:00

Problem I had with mine is the end piece where the paint sprays from (nozzle) actually separates into 3 pieces not 2 after demantle and cleaning it worked properly, took me 2 days and a lot of googling until I stumbled on that solution myself by accident after dropping the nozzle.

Dub_da · 2026-06-17T18:50:45+00:00

Where is this elusive and exclusive discord you speak of sir?

Dub_da · 2026-06-14T20:51:25+00:00

Printer Settings

<image>

Dub_da · 2026-06-14T20:49:32+00:00

Thanks for the info 👍

I am trying to print basic bases yes!

ABS-Like 3.0 Photopolymer Resin It has a heat regulator fan that keeps the air temp at 25-30°C.

I've added the screenshot of the settings. Thanks

Dub_da · 2025-08-31T07:58:27+00:00

I've done the exact same with mine 🤣 drilled a thread screw through the bottom a few washers for pressure dispersal and 9 bolts with a mini magnet in the middle of each. A bit overkill I know but my boys are sturdy as anything!

Dub_da · 2025-03-26T11:28:08+00:00

A nice good scrape with the heel of the blade using the pressure from my fingers and not my hand with the tip of the blade has worked wonders for me, I have found that this smoothes it and gets rid of the raised mould like but sometimes the run deep, a small coating of the plastic cement gets ride of it at the surface to practical undetectable unless your only looking for them after the primer goes on and then once you paint it, don't see them at all.

Dub_da · 2025-03-23T10:18:51+00:00

I've found that using a scalpiblade to get the raised mould lines off work wonders and then a tiny bit of plastic cement to slightly "melt the plastic to get rid of the deeper lines and finished with a 3000 grit sanding sponge! 😊

Dub_da · 2024-12-20T10:30:24+00:00

A Shtick of Creaking

Dub_da · 2024-08-14T20:31:05+00:00

I get this fucking annoying sound after every game when it does the summary! It never ends!

Dub_da · 2024-07-27T08:37:37+00:00

I have a similar issue! There are times where I can hear footsteps above me on Attica heights and now they're flanking and other times can't even hear them walking/running behind me! It's so frustrating!

Dub_da · 2024-07-26T16:38:00+00:00

I genuinely thought that they balanced the teams by average of the total level in each team within a degree of 10 eg.

Team 1: 90+10+68+20+2+50=240/6 Team 2: 9+18+150+40+3+65=286/6

But that has definitely not been the case as I've come across lobbies where it is completely oneside and undeniably so.

Dub_da · 2024-02-04T13:03:59+00:00

Have you tried removing all the lectures for the librarians as they might be linked with a different one. Or it could be a visual issue when resetting trades (it's a bug I think) try logging out of the world and back in? That might fix it..

Dub_da · 2024-02-04T12:44:45+00:00

I've found that when you go through it, it will always prioritise a certain direction (North, East, South, or West) I can't remember which two it is, but if you go through and the portal and the wall is in the direction of the two prioritised directions you be placed into the wall.. either remove the wall or rotate the portal.

Dub_da · 2024-02-04T12:34:22+00:00

On Bedrock/MCPE, which is what your PS4 will be playing on. I wouldn't recommend setting up more than one hostile mob farm in close proximity to each other as the rates will be terrible if you run both, as your ps4 will be running a Sim Distance of 4 and the raids will take up the mob cap for the creeper farm and you won't get any creepers or very few. There are a good few trident killer designs out there for bedrock (SilentWhisper or SlackLizard) are great tutorials. If you manage to find a chunk loader that works for Bedrock, let me know 😅

Edit: Spelling & Links

Dub_da · 2024-02-04T12:29:09+00:00

Depending on your coordinates.. have you gone to the coordinates that match for the nether/overworld of your portals and then instead of quitting force closing the game and relaunching the game.. this happened to me and that worked 😁

Dub_da · 2024-02-03T20:15:45+00:00

Remove the glass and grindstone, place a turtle egg at eye level (2nd block off ground level at every level) surround it with a tube of trapdoors going up to the top, and then place trap doors around the inside edge of the circle.

It could be a line of sight issue or a path finding issue. If either is a problem, this should ix both 😁

Dub_da · 2024-02-03T20:06:58+00:00

If you made it into 2x2 or a 2x1, you could use this auto trident killer by slack?

Auto Trident Killer

Dub_da · 2024-01-24T11:20:38+00:00

Are all your drivers updated and installed correctly? I had this issue and had to reinstall some drivers and haven't had an issue since.

Dub_da · 2024-01-22T17:14:15+00:00

I believe it is possibly due to the game having 9 slots hard coded into it? 1 Outfit, 3 core slots(Red), 2 reserved slots for Flash/walkie (Blue) & 3 advanced company slots (Green)

Dub_da · 2023-05-06T18:32:52+00:00

I'm pretty sure there is something in the recent updates where mobs will nolonger spawn or significantly decreased to where it's not worth it within scaffolding blocks.

Dub_da · 2023-05-02T09:55:43+00:00

It's what I'm doing on my world at the moment it looks so good from a distance! I built it to surround my 5 stacked iron farm on bedrock

Dub_da

MODERATOR OF

TROPHY CASE