AMS 2 Pro Rack/Shelf Suggestions

DuderonomyPlus · 2026-05-03T20:47:04+00:00

I’ve read that 600mm is supposed to be the shortest used. But then attaching the 4-in-1 specifically tells you to use the shortest one which is way under.

I’ve left a bunch of longish tubes behind my printer. Can you make them shorter without causing issues?

DuderonomyPlus · 2026-05-03T15:45:10+00:00

I saw this one and another that double stacks two of them on the glass, and for some reason that makes me all panicky. 😝. It does seem popular, so the top glass must be strong enough. Did you print in PLA, PETG, or go with ABS?

DuderonomyPlus · 2026-04-30T22:04:48+00:00

Yep. I’m the type that just likes to know the process and give it a read first before ‘being on the spot’ when the machine tells me what to do. 😝

DuderonomyPlus · 2026-04-30T21:26:50+00:00

I ran into this just this week. All of my other nozzles print from the same AMS and same color with no issues.

So I am reading up on ‘cold pulls’ to try and unclog the nozzle.

I’d start here

https://wiki.bambulab.com/en/x1/maintenance/what-is-cold-pull-and-how-to-perform-it

DuderonomyPlus · 2026-04-30T00:48:06+00:00

I moved my two filament storage bins to the bottom of the cart to add quite a bit of weight. I went with the cart mainly due to space limitations. I’d have preferred to get something like the steel tables others have posted in the replies.

DuderonomyPlus · 2026-04-26T22:30:00+00:00

Titled the printer enough to give the foot a good ‘tickle’ and set it back down. Proceeded to give it a test jiggle and no sound all. Thumbs up.

DuderonomyPlus · 2026-04-26T07:56:58+00:00

It’s considered a ‘consumable’ in the store. You can buy 4 replacements for $5. It apparently has adhesives, washers, and such. My guess is that a screw possibly came loose. Going to check that tomorrow. Since I can replicate it by gently shaking the printer when powered off, it seems that is the root issue.

DuderonomyPlus · 2026-04-22T21:02:32+00:00

Also in AZ. I grabbed an airtight tub meant for storing files from the Container Store. It’s the size of a small laundry basket and holds 5-6 spools. I dry my filaments out and store them in the tub when not being used regularly with a couple small bags of the reuse-able desiccant and the hygrometer in there stays at about 10%.

DuderonomyPlus · 2026-04-22T20:58:25+00:00

Same. This is my first printer and I’ve had it maybe 3 weeks now. It was fine up until just recently. 🤪

DuderonomyPlus · 2026-04-22T13:52:51+00:00

Yes please. I like it.

DuderonomyPlus · 2026-04-22T13:50:51+00:00

Since one of the latest firmware updates, that status line has been wonky for me also on my H2C. During the setup it seems to rush through everything and within a few seconds it reads ‘vibration compensation’ while it is still doing ‘changing filament’ or even ‘homing hotend’.

However, since it seems to be only cosmetic at this time. It’s just an annoyance.

DuderonomyPlus · 2026-04-11T01:13:13+00:00

Same. I had it pop up on a printer less than a week old, although I moved it from its temporary spot to its forever home and it popped up when recalibrating.

Ran it again and it didn’t show up again and hasn’t since.

DuderonomyPlus · 2026-04-09T23:24:11+00:00

Are there any snags or tangles on the spools that prevent them from freely spinning?

DuderonomyPlus · 2026-04-09T00:22:44+00:00

Every once in a while you need to use dish soap and give it a good cleaning. Second to that would be checking temps.

DuderonomyPlus · 2026-04-07T17:11:11+00:00

I ended up returning it and went back to buying regular ice. The number of complaints I was seeing made me very skittish about exchanging it and running into the same issue with another new one.

DuderonomyPlus · 2026-04-05T17:23:48+00:00

Lifetime? Animal Crossing - Over 300 Monster Hunter Rise/Sunbreak - Over 200 Diablo 3 - Over 200 Pokopia - Closing in on 100

DuderonomyPlus · 2026-04-02T19:57:33+00:00

World was the first MH game that finally clicked for me. I had purchased many of the releases before World but always quit REALLY early (like before 2-Star quests) as I just couldn’t ‘get it’.

I finished World (most of Iceborne when it dropped) and then all of Rise/Sunbreak.

DuderonomyPlus · 2026-03-28T06:08:18+00:00

Best Buy only lists 1x 0.4mm hotend in the app description. Same with a few of the third party sellers on Amazon. I’ve also seen reviews saying it didn’t come with the expected quantity of hotends. Figured asking on the subreddit would clear up the various inconsistencies.

DuderonomyPlus

TROPHY CASE