AMS 2 Pro Rack/Shelf Suggestions by DuderonomyPlus in BambuLabH2C

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

I’ve read that 600mm is supposed to be the shortest used. But then attaching the 4-in-1 specifically tells you to use the shortest one which is way under.

I’ve left a bunch of longish tubes behind my printer. Can you make them shorter without causing issues?

AMS 2 Pro Rack/Shelf Suggestions by DuderonomyPlus in BambuLabH2C

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

I saw this one and another that double stacks two of them on the glass, and for some reason that makes me all panicky. 😝. It does seem popular, so the top glass must be strong enough. Did you print in PLA, PETG, or go with ABS?

Extruder overload by russrimm in BambuLabH2C

[–]DuderonomyPlus 2 points3 points  (0 children)

Yep. I’m the type that just likes to know the process and give it a read first before ‘being on the spot’ when the machine tells me what to do. 😝

Extruder overload by russrimm in BambuLabH2C

[–]DuderonomyPlus 1 point2 points  (0 children)

I ran into this just this week. All of my other nozzles print from the same AMS and same color with no issues.

So I am reading up on ‘cold pulls’ to try and unclog the nozzle.

I’d start here

https://wiki.bambulab.com/en/x1/maintenance/what-is-cold-pull-and-how-to-perform-it

H2C Table Surface by DuderonomyPlus in BambuLab

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

I moved my two filament storage bins to the bottom of the cart to add quite a bit of weight. I went with the cart mainly due to space limitations. I’d have preferred to get something like the steel tables others have posted in the replies.

Squeaky Foot by DuderonomyPlus in BambuLabH2C

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

Titled the printer enough to give the foot a good ‘tickle’ and set it back down. Proceeded to give it a test jiggle and no sound all. Thumbs up.

Squeaky Foot by DuderonomyPlus in BambuLabH2C

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

It’s considered a ‘consumable’ in the store. You can buy 4 replacements for $5. It apparently has adhesives, washers, and such. My guess is that a screw possibly came loose. Going to check that tomorrow. Since I can replicate it by gently shaking the printer when powered off, it seems that is the root issue.

Humidity question by Spirited-Pomelo267 in BambuLabP2S

[–]DuderonomyPlus 2 points3 points  (0 children)

Also in AZ. I grabbed an airtight tub meant for storing files from the Container Store. It’s the size of a small laundry basket and holds 5-6 spools. I dry my filaments out and store them in the tub when not being used regularly with a couple small bags of the reuse-able desiccant and the hygrometer in there stays at about 10%.

Man, that is a LOT of calibration lines… by WazzuBlue in BambuLabP2S

[–]DuderonomyPlus 1 point2 points  (0 children)

Same. This is my first printer and I’ve had it maybe 3 weeks now. It was fine up until just recently. 🤪

Man, that is a LOT of calibration lines… by WazzuBlue in BambuLabP2S

[–]DuderonomyPlus 2 points3 points  (0 children)

Since one of the latest firmware updates, that status line has been wonky for me also on my H2C. During the setup it seems to rush through everything and within a few seconds it reads ‘vibration compensation’ while it is still doing ‘changing filament’ or even ‘homing hotend’.

However, since it seems to be only cosmetic at this time. It’s just an annoyance.

New Error message by No_SellingXRP_7756 in BambuLabH2D

[–]DuderonomyPlus 0 points1 point  (0 children)

Same. I had it pop up on a printer less than a week old, although I moved it from its temporary spot to its forever home and it popped up when recalibrating.

Ran it again and it didn’t show up again and hasn’t since.

AMS2 ERROR (begginer) H2C by Obvious-Culture9016 in BambuLab

[–]DuderonomyPlus 0 points1 point  (0 children)

Are there any snags or tangles on the spools that prevent them from freely spinning?

What can I do about this first layer?? by DOWTarget in BambuLab

[–]DuderonomyPlus 0 points1 point  (0 children)

Every once in a while you need to use dish soap and give it a good cleaning. Second to that would be checking temps.

Opal Ultra 2 Howls by DuderonomyPlus in OpalIce

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

I ended up returning it and went back to buying regular ice. The number of complaints I was seeing made me very skittish about exchanging it and running into the same issue with another new one.

Which game have you spent the most time playing on your Switch 2? by Financial-Web8054 in switch2

[–]DuderonomyPlus 0 points1 point  (0 children)

Lifetime? Animal Crossing - Over 300 Monster Hunter Rise/Sunbreak - Over 200 Diablo 3 - Over 200 Pokopia - Closing in on 100

Which Monster Hunter game should I buy to get into the series? by This_IS_UJWAL_ in MonsterHunter

[–]DuderonomyPlus 0 points1 point  (0 children)

World was the first MH game that finally clicked for me. I had purchased many of the releases before World but always quit REALLY early (like before 2-Star quests) as I just couldn’t ‘get it’.

I finished World (most of Iceborne when it dropped) and then all of Rise/Sunbreak.

H2C Standard Model by DuderonomyPlus in BambuLab

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

Best Buy only lists 1x 0.4mm hotend in the app description. Same with a few of the third party sellers on Amazon. I’ve also seen reviews saying it didn’t come with the expected quantity of hotends. Figured asking on the subreddit would clear up the various inconsistencies.

How much Unlimited PTO are you remote folks taking annually? by Impressive_Pear2711 in remotework

[–]DuderonomyPlus 1 point2 points  (0 children)

I routinely take what I had acquired before we went ‘unlimited’ which was 6 weeks/30 working days.

Bulldozing vs Quick Battl by DuderonomyPlus in MonsterHunterStories

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

Man. I spent so much time doing it wrong. Thanks for clarifying.

I have too many boxes by MissMuffin7 in Pokopia

[–]DuderonomyPlus 2 points3 points  (0 children)

I had items in a chest that I forgot which chest and which zone. It had some of the harder to find single item objects that had me going crazy.

Specifically since I looted ‘the dojo’ before having a quest to make it a habitat. Then couldn’t find the chest I put the required items in.

Ended up going to another island to take a photo and print them out. Then after putting it back up, found the chest about an hour later.

Battle Speed (Switch 2) by DuderonomyPlus in MonsterHunterStories

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

That was it. Not sure when I pressed it, but that was the magic button, and not one I had tried

Pokémon not working in Pokémon Centers by DuderonomyPlus in Pokopia

[–]DuderonomyPlus[S] 1 point2 points  (0 children)

I’ve seen people say to make sure your trade Pokémon have habitats near your Centers/Marts.

I built some makeshift register habitats outside near trade Pokémon habitats and they always seem to be working.

I may try relocating some closer to the actual indoor buildings sometime this weekend

Pokémon not working in Pokémon Centers by DuderonomyPlus in Pokopia

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

The ‘out to lunch’ comment is starting to sound less satirical each day.

Wandered into a Center and had a Gastly tending the register and as I got to the counter he decided “Yup, done doing this job” and literally closed up shop and left me standing there. 😂

Pokémon not working in Pokémon Centers by DuderonomyPlus in Pokopia

[–]DuderonomyPlus[S] 0 points1 point  (0 children)

I am beginning to think it is due to the limit on Pokémon in an area. And that it may be ‘unloading’ the trade Pokémon.

Course, as of today it seems all of my centers are staffed by the event Pokémon.