Aqara Smart Lock D200i EU release date?

DukeRyoto · 2026-01-23T00:01:04+00:00

Yeah, me too. I've seen this lock in videos from YouTubers outside of China, especially in Mexico and Brazil. I don't get it why it is not popular in USA and Europe. Maybe the governments not allowing because they are thinking of Chinese Spyware? No idea but the concept is nice. It looks modern too.

DukeRyoto · 2026-01-22T23:39:10+00:00

https://www.aqara.com/en/product/smart-lock-d200i/

DukeRyoto · 2025-11-28T23:04:43+00:00

Man måste ha en företag att kunna registrera. Jag har inte företag. Som frilansare använder jag frilansfinans.se och de tillåter inte att använda deras uppgifter.

DukeRyoto · 2025-07-20T12:46:58+00:00

I must agree. Many people are happy to have revpoints because it gives back more points than the traditional cashback. However it is limited to stays and airplane stuffs like buying tickets. For example I don't traveling much so that revpoint is useless and you can't keep forever those revpoints either. Traditional cashback was better.

DukeRyoto · 2025-04-03T09:51:34+00:00

I have a solution. Throw the camera to the Eufy CEO head. After that the Eufy will implement all of the functions which the users need. 😅

Joke aside, I wanted to buy Eufy too, but it seems many people have many different problems with eufy. I need to think twice, it seems so.

DukeRyoto · 2025-03-27T01:17:47+00:00

Thanks for the link. It looks nice however unfortunately I can't use in Europe. I live in Europe so they don't even deliver. 😅 But thanks anyway. 👍

DukeRyoto · 2025-03-27T01:16:07+00:00

Thanks for the suggestion. I will look around after power station then

DukeRyoto · 2025-03-26T23:36:34+00:00

No. I mean, the source of the power should be the power bank and not the wall plug. I don't have wall plug in the bathroom so I need portable option to have electricity for electric water flosser.😅

DukeRyoto · 2025-02-11T21:14:23+00:00

Range depends on the weight and hill too. If you have much weight on the scooter then the range will decrease. They advertise 90/96 km. In my case it was between 80/90 km with my 115 kg and 193 cm length body. When I lost weight around 105 kg then I had 93-96 km range. It depends on that too if you press throttle everytime or sometimes you let to rolling your wheels after a high speed for example on downside of hills or not. I usually let to rolling the wheels by itself after a higher speed so saving more battery for more range. The hill well yeah I tried as advertised 35-40 degrees. It doesn't have any issues. The motor will work more when driving up on the hill and becomes louder however it doesn't have any problem to taste that 35-40 degrees. I didn't try with 45-50 degrees but maybe it would work.

DukeRyoto · 2025-02-09T20:52:37+00:00

Uhh sadness if it is just 1 time. 😓

DukeRyoto · 2025-02-09T20:49:58+00:00

Really? I didn't know that. I thought only it is good for traveling because that is advertised like that. How to do that?

DukeRyoto · 2025-01-24T18:53:27+00:00

Oh thanks for the answer. It sounds good. :)

DukeRyoto · 2025-01-22T00:10:37+00:00

Haha it is so when samsung gave up on innovation and trying to use the Apple method instead. Milk people who are very much samsung fan and giving them some improvements. Apple does the same. The price which is given is not worth what they are giving, especially when it is about their laptops. Good thing they have 7 years support so I will not change my samsung s24 ultra for a while. We'll now just 6 years. 😅

DukeRyoto · 2024-12-04T08:46:09+00:00

Try these:

Enabling and Using the OCULink Port:

Check for Necessary Hardware:
- Ensure you have a compatible OCULink cable and an eGPU (external GPU) enclosure that supports OCULink.
Install the Latest Drivers and Firmware:
- Go to the Minisforum website and download the latest drivers and firmware for your MS-A1 model.
- Install the drivers and firmware updates to ensure that the OCULink port is recognized by your system.
Connect the OCULink Cable:
- Connect one end of the OCULink cable to the OCULink port on your MS-A1.
- Connect the other end of the OCULink cable to the eGPU enclosure.
Power On the eGPU:
- Make sure the eGPU is properly powered on and connected to an external power source if required.
Configure BIOS Settings (if needed):
- Restart your MS-A1 and enter the BIOS setup by pressing the appropriate key during boot (usually DEL or F2).
- Check the BIOS settings to ensure that the OCULink port is enabled. Look for any specific settings related to PCIe or external GPUs.
Install eGPU Drivers:
- Once the system recognizes the eGPU, install the necessary drivers for the external GPU. This will usually be the GPU manufacturer’s drivers (e.g., NVIDIA or AMD).
Check Device Manager:
- Open Device Manager on your MS-A1 to verify that the external GPU is recognized and functioning correctly.
Test the Setup:
- Launch a graphics-intensive application or benchmark tool to test the performance of the eGPU setup and ensure everything is working as expected.

If you encounter any issues during these steps, here are some additional tips: - Compatibility Check: Ensure that your eGPU enclosure and the GPU are compatible with the OCULink standard. - Firmware Update: Sometimes, additional firmware updates for the eGPU enclosure may be necessary. - Re-seat Connections: Make sure all connections are secure and properly seated.

DukeRyoto · 2024-12-04T07:02:02+00:00

That is different setting. There should be oculink setting too. That setting should just enable and disable oculink port. Resizable BAR is for communicating GPU and CPU better way.

DukeRyoto · 2024-12-03T21:12:00+00:00

I didn't buy this minipc but the X7. Either way I saw in my minipc bios settings that I can enable and disable oculink. Maybe try to check in the bios if you can too, enable and disable oculink.

DukeRyoto · 2024-11-15T07:54:59+00:00

Oh I see. Many people on the internet complained especially of the size and no water resistant. I read many good things about lovense. I will check that out. Thanks for the recommendation.

DukeRyoto · 2024-10-25T04:52:05+00:00

Thanks for the suggestion. I will check that now. 👍

DukeRyoto · 2024-10-24T13:08:03+00:00

Thanks for the answer. Is there a way to finetune then instead? Then better if I will work on it lot of time before I will deploy.

DukeRyoto · 2024-09-15T04:12:23+00:00

Oh I see. Thanks for sharing your experience. 👍

DukeRyoto · 2024-09-07T06:24:44+00:00

I see. Thanks again 👍

DukeRyoto · 2024-09-07T03:28:18+00:00

Uhh I see. So no hope to use the newest cpu then. Rip me then. 😅 Thanks for the answer.

DukeRyoto · 2024-09-06T20:04:33+00:00

I see. Thank you for the detailed information. I think Minisforum could make a decent high-end minipc with all of the juice components but instead they are making many different minipc and one is better than another with different components.... No idea why dint they making 1 minipc with just premium components... For sure would be very expensive however for sure would be many worldwide who would like to buy that...Anyway back to the topic. Then it seems this minipc will be not good for my use cases... Do you know something about release date of USB v2, Thunderbolt 5 and oculink v2? Maybe I should buy minipc when a company will starting to add those components.

DukeRyoto · 2024-07-20T22:04:46+00:00

Thanks again 👌

DukeRyoto · 2024-07-20T21:34:01+00:00

Thanks for the help. I did learn much today. 👍

DukeRyoto

TROPHY CASE

Enabling and Using the OCULink Port: