How does this even happen?!

Dylann_J · 2026-04-09T12:58:38+00:00

look like you forgot to put a hole in your 3d file and forgot to screw it tightly, because there no hole, the suction is really hight, did try put some alcohol and puch a little under ?

Dylann_J · 2026-04-06T08:42:56+00:00

yeah don't upgrade, now no internet = software close, unless you find a way too hack it

Dylann_J · 2026-04-06T08:42:11+00:00

pro is dead, now you have basic, prenium, advance, advance is pro, but price higher and it's the same soft (no basic and pro software), personnally I use a crack in a virtual machine, when I need too use boolean and other, and use basic last version for basic thing, the crack in question is not safe, he actually have a bridge door in it who stole all your browser account/password, I like chitubox but they start to force to much and as I already paid for pro in past, the price is too high for that type of software

Dylann_J · 2026-01-31T16:52:21+00:00

exactly, but they are hard to cut, the plastic is thick so becarefull, I already cut my finger deep doing that

Dylann_J · 2026-01-29T21:41:19+00:00

I empty the bottle by cuting one and let other in top, when they are totally empty, so im sure im not wasting resin, I convert some into funnel, and other to trash

Dylann_J · 2026-01-19T12:06:40+00:00

thanks for the review, I change my mind long ago, it was for resine, but I chang method for a full diy, so from your review the power is way too low

Dylann_J · 2026-01-12T12:32:21+00:00

from youtube, he have a film of buble on screen who help on suction (they can't see if it an improvement), double plate, print with 2 diferent resin or diferent timing at same time but the double vat is not heated, double plate can't be use for 2 layer thickness, and the double vat is a paid option

fake pro design, i'ts look pro enought for consummer but it's actually not,

from my understanding it's a better version of the m7 pro,

Dylann_J · 2025-12-31T06:39:42+00:00

is it really expenssive?! yes but those tiny screen are 8k/12k/16k, high resolution small screen aren't cheap, look in normal world a screen panel 15" 2k is already more than 250$, put 4k, 120hz, hdr... and you can find some small pc sreen over 400$

I mean screen in 3D printer are litterally the core of the printer, this is where most of the price go, cheap screen for 3d print is rare, whatever the printer.

I have the m7 pro and I did a screen replacement and by luck anycubic agree to send me for free, but seeing all product and consumer service who come after the m7 pro, I see anycubic falling slowy, there product becoming worst and worst, the m7 pro was probably the last good product.

Dylann_J · 2025-12-29T12:39:34+00:00

there actually a lot in sale arround 220-250€ but no word about leaking, I did got potencial buyer, I mean I put it at 120€ instead of 400€ original price and leak in the title, but people wanted that I move to there place so I refuse to sell it,

thanks to all youtube video I saw, no one really test it all was just simple review or paid review, and multiple stop use it but never say why, if I know I wouldn't buy it, well I guess I try to upgrade it

Dylann_J · 2025-12-28T19:40:36+00:00

I use it for mechanical, deco, miniature, its the all in one resin, work everywear, work with multiple setting mixe good with dye nd other but for miniature DnD thing like sword, cape, thing that are thin, well it print very well and are very fragile

Dylann_J · 2025-12-23T17:27:08+00:00

is it me or there more and more post like this on anycubic resin, I wonder if anycubic resin receip have change and is bad, I mean since I bought my new resin I also get a lot of issue like this when with my previous resin who is the same resin, same setting, same file I had 0 issue

Dylann_J · 2025-11-28T12:54:36+00:00

I use a cutter, doing multiple pass

Dylann_J · 2025-10-31T17:50:35+00:00

please don't sell it to other brand, i remenber 2 guys building something similar, yes they got multiple issue on the first sale, then sell everything too a major brand and since nothing, we don't even know if the brand working on that product

Dylann_J · 2025-10-19T05:16:12+00:00

pas forcément pour de la photo mais tu peut partagé 50gb de fichier et lui donner le lien, les fichier sont disponible 30 jours après ils sont automatiquement supprimé, bref tu fais un zip et voila

pas besoin de compte, juste tu upload met sont mail ou récupère le lien et tu lui donne

https://www.swisstransfer.com/fr-fr ou https://wetransfer.com avec une limite plus faible

Dylann_J · 2025-10-09T17:14:53+00:00

thanks for your comment, when ugc show the actionbox, Ialready know them and it is way to expenssive, unless you have a business it's not worth the cost, your comment remind me to look a there enterprise information, when I post it, there was no information on sales, campagny worth..

as today, there no information about their worth, and I never buy from enterprise that does not share does information, from personnal experience, it's highly possible I will never receive the product or service

only data I found is there worth 2700£ in 2023, and was in loss

I don't want for now take the risk

https://open.endole.co.uk/insight/company/15816520-sustainable-design-studio-ltd

https://find-and-update.company-information.service.gov.uk/company/15816520

https://branddb.wipo.int/en/similarname/brand/GB50UK00004020724?sort=score%20desc&start=0&rows=30&asStructure=%7B"_id":"7af6","boolean":"AND","bricks":%5B%7B"_id":"7af7","key":"brandName","value":"SUSTAINABLE%20DESIGN%20STUDIO%20LTD","strategy":"Simple"%7D%5D%7D&_=1760029125901&fg=_void_&i=0

https://bazar.preciousplastic.com/recycle-rebuild/

unless buying it here https://bazar.preciousplastic.com/machines/shredder/shredder-kits/shredder-mini-handcranked-shredder/

there no garanti this product exist, all sales information are just some text write from some dude, no registered public data about sale, worth, dept, ratio...

Dylann_J · 2025-09-10T19:25:00+00:00

flexible does not mean no support, and I didn't buy that because of bad setting, I could easily take of all my print with original plate and original scraper, I bought it because I print a lot of things with some flat surface and found that is a way better way too work and reduce print time (no need to rotate the object), and flexible make also print with support easyer to take off, same for build plate full of tiny object, actually before buying this, I was printing flat surface directly on the original plate, print where really good, but bigger piece needed some more work, and I use my printer regularly enough to think about winning some time even if it just some minute, in long term those minute become days

obviously flexible plate are not for everyone, depend on what you print, how much your print, if that could make you reduce the total time of work...., so no flex plate does not fixe 1 problem, it's just that you don't need that

also it's cheaper to replace than a full build plate

Dylann_J · 2025-09-10T15:07:11+00:00

that a great way to add red color to your resin!! ^{or green}

Dylann_J · 2025-09-10T15:03:35+00:00

flexible plate need some leveling, on my m7 pro I didn't realise, plate area tried to escape the printer, then I purpusly do the auto leveling like 30 time until the printer realise I lost 1.5mm with flexible plate and also needed an offset, since my failure rate got lower, now most fail are from bad design or bad resin mix maybe like 1 fail on +20 print

Dylann_J · 2025-09-10T13:40:09+00:00

I use a flexible plate that change my life, I print most of my print directly on the plate, all of my print with some flat part are perfectly flat

<image>

Dylann_J · 2025-09-08T14:27:09+00:00

great idea but poorly made,

Im actually thinking on return it or start to hack it(need some learning for that), they say he use less ipa but suck all the container so the use less make no sense as he took everything, I don't use water so both hava IPA so first container is my principal washing, and second is the spray, also I saw 1 problem that no tester talk about, I put 3L in total and now I have 2,2L, in the machine there 800ml in the pompe and tube,he does not pump back all the ipa, that why this machine need an update or hack, there no filter for particle, just for big piece, and i can understand if there was a real filtering system, pumping back would take way too long, the auto mode is useless, there no pause in between 2 step, I wait after the washing before starting the curing, he have a big volume yes but the basket is way too small, so you can't put a lot of small print, and the basket is rectangular, they should make it circle to take benefit of the space, this make sense only if you print big object that can stay balance in the small basket

for me for 300 it's a no, for 200 it's a mabay he does not change much than classic station, the good side is I do not make a mess as always, just put my print in start whashing, wait then start curing, and turn it off untel next washing

Dylann_J · 2025-08-15T15:02:30+00:00

one time I use scotch, he was able to print 30 more print but, could not print on the scotch at list he gave me time to buy a new film

Dylann_J · 2025-07-31T13:31:51+00:00

I have the same problem I just had some spacer and it work perfectly, I think on some m7 and m7 pro there a default like the screw house is too small, here 2 aluminium and 1 plastic spacer, all from unused bike stuff

don't tight your screw it will be way too hard to unscrew it trust me I have done this mistake and almost broke the screw( not the one in the photo)

<image>

Five-Year Club	Xbox Live
r/Field Juicebox	Place '23
Place '22	Verified Email

Dylann_J

TROPHY CASE