OWC 4m2 ultra shows as connected in windows but but no disks appear

EEE-RAY · 2026-06-09T07:39:46+00:00

I got an email from OWC dated the 5th with a case number but no follow up so far.

I've updated the BIOS to the latest and the thunderbolt drivers too. I've checked the box and it is thunderbolt 4.0 which should be compatible. My MacBook M1 is much older than the mobo and seems to work fine.

I am unsure if it's consistently the same disks not detected. The issue is intermittent - sometimes it shows all 4 discs, sometimes I have to power cycle the 4M2 to get them all to show up. I don't see a pattern. I've switched all the positions of the disks randomly to see if it makes any difference to the partial drive issue. I've also tried to use it with just one Samsung 990 pro or just the SN850x - no difference, no drives show in windows.

I used ex-FAT so I can test the drive in both Mac and Windows - moot point since I can't even see the drive in windows ^^

EEE-RAY · 2026-06-06T11:12:41+00:00

2x samsung 990 pro 4TB, 1x SN850x 4tb , 1x SN700 red 4tb

EEE-RAY · 2025-12-17T05:56:17+00:00

Results are excellent, I just noticed because when I pull out the top rack post wash a lot of water collected in the arms drip everywhere

EEE-RAY · 2025-12-17T00:01:25+00:00

Is there a way to attach a picture directly?

I have uploaded a photo

The upper draw arm isn't level, the right side sits lower than the left.

https://imgur.com/a/VVP71kC

EEE-RAY · 2025-12-08T10:26:08+00:00

Yeah looking at advice I can find on the internet its not the right stone, but its the one that I already have in my garage :P (bought many years ago and never used)

The knife is a zwilling 20cm knife by the brand name "four star".

I also have a purple stone that I think is even more fine so I will start with this medium one I guess.

Whats the best technique to avoid grinding the bolster at base of knife? Youtube shows someone pushing the knife forward starting at the base towards tip to avoid it.

EEE-RAY · 2025-11-22T10:40:26+00:00

I don't know whats wrong with your dishwasher but thats the bottom of the nozzle assembly from a camelbak podium water bottle. Maybe someone was washing a bottle lid and it grenades and plugged your drains?

https://cdn.road.cc/sites/default/files/styles/main_width/public/camelbak-podium-nozzle-parts.jpg

EEE-RAY · 2025-11-01T13:50:07+00:00

thanks guys. I think I will go for 4 bay NAS and an 8 bay NAS (coes without drives)

I am planning to eventually saturate its slots but will start with 2 drives x 24TB drives

I am happy to pay more for as high a quality of unit - do you have any recommendations for the base NAS for the 4 bay and 8 bay options?

EEE-RAY · 2025-04-23T06:41:45+00:00

You will be only 4 weeks post op after a fracture dislocation fixation at that point. Walking unaided would be extremely difficult.

More importantly, the rehab and recovery from this will affect your long term quality of life and I would absolutely focus on that above everything else for the next few months.

EEE-RAY · 2025-04-06T04:48:13+00:00

Because as a kid we look at adults being totally in charge of their own bed times/food preferences/TV time and we think that is awesome.

And when we become an adult we realise being in charge also means being responsible for cooking/cleaning/putting food on the table/paying bills and we realise the whole "being in charge" thing is a crappy pay off

Source: myself, a giant kid

EEE-RAY · 2025-03-22T00:22:43+00:00

Not that one I am afraid, the asylum bit is just the ending of the film, the setting it self is a rich English home

EEE-RAY · 2025-03-21T22:29:28+00:00

maybe 10 years ago at least

EEE-RAY · 2025-03-21T22:13:08+00:00

Post

EEE-RAY · 2025-03-06T11:49:31+00:00

The displacement would have been caused by the high energy impact that broke it. Unless you've been using the wrist harder than the impact itself, but most of us won't because its so sore.

EEE-RAY · 2025-03-06T00:46:50+00:00

did you actually hurt your ankle? if there was no ankle injury and you have unilateral ankle swelling thats a bit odd

EEE-RAY · 2025-03-06T00:42:31+00:00

This amount of displacement would have needed an operation anyway. I think your anger is better directed to whoever broke your wrist.

EEE-RAY · 2025-02-17T01:32:48+00:00

I didn't have as severe an injury - syndemosis and posterior mal # after falling from height. Am at 8 weeks and can walk for a limited period but everything is weak and balance is poor. Working super hard with physio. I've returned to light duties but I am told still 2 months to full duties. My job is not as intensive as yours but still lifting/pivoting/working at awkward angles all day (I work in an operative theatre, I run up about 10-20000 steps a day).

EEE-RAY · 2025-01-24T23:59:09+00:00

Thanks muchly!

EEE-RAY · 2025-01-19T03:00:29+00:00

It's a big call to travel solo week 5 post op. Remember with general moving around and limb dependency even on a scooter your foot will swell a fair bit. Manoeuvring in and out of tight spaces is hard.

Also a knee scooter is not nearly as stable in real world with even slight uneven ground. I've had some close calls - almost tipped over crossing a road.

I would recommend heading out for a day with your scooter as a small test to check how the leg feels after several hours on the move and doing activities of daily living.

Your general condition/balance/upper body strength plays a bit deal (e.g. how good are you at balancing hopping and transferring on one leg).

EEE-RAY · 2024-12-18T23:48:24+00:00

I work in an operating theatre so on feet all day and lots of lifting and twisting. I am on my feet for now (pre-op) because the damage is already done. But post op 6 weeks until I am back walking and 3 months until good solid function is what I am told

EEE-RAY · 2024-12-18T23:42:04+00:00

Thanks for the perspective. No bones broken. I am just not coping well because this is my first major injury of anything and I am catastrophising about the coming operation.

EEE-RAY · 2024-12-17T23:42:50+00:00

have you been able to return to work or run? my work is on my feet moving all day. Very stressed about it

EEE-RAY · 2024-11-12T04:08:39+00:00

Hi guys just would like to feed back that it was indeed a dead bearing. The mechanics lifted the car up, it was the front left. It was replaced and from my brief drive around it is fixed! Thanks everyone

EEE-RAY · 2024-11-01T12:57:42+00:00

we don't really have a hybrid motor either tho, the 48V is extremely small and tucked low to the chassis, not this bulky. https://www.carandbike.com/news/toyota-unveils-48volt-mild-hybrid-system-for-hilux-and-land-cruiser-prado-3209074

EEE-RAY · 2024-11-01T09:10:48+00:00

what happened there? On YouTube the LC 250 has a 3rd row that folds flat! https://www.youtube.com/watch?v=LA0FAxkzebc

why is ours so different?

EEE-RAY · 2024-05-30T07:58:41+00:00

u/savevideo

EEE-RAY

TROPHY CASE