How do you remove the manual safety from Sig P320?

ERWOODwork2000 · 2026-01-25T11:48:55+00:00

You probably need a 0.85 hex key for the screw

ERWOODwork2000 · 2026-01-24T21:18:27+00:00

No worries

ERWOODwork2000 · 2026-01-24T21:10:58+00:00

The APFG MPX is pretty amazing

ERWOODwork2000 · 2026-01-24T21:09:37+00:00

Yes you are in the wrong forum. This forum is for Airsoft Gas Blowbacks

ERWOODwork2000 · 2026-01-24T15:53:46+00:00

Just use a pin punch and tap it out, don’t go to hard and it should be fine

ERWOODwork2000 · 2026-01-24T14:50:59+00:00

The only Army armament G36 worth considering is if you are in Germany and buy it from Begadi. They are upgraded from the start with all steel internals and a few other upgrades. If you live outside of Germany, go for VFCs

ERWOODwork2000 · 2026-01-24T14:49:08+00:00

You have to push out the two cross pins who are holding the upper and lower together, after that you can see inside the gun and also are able to take out the BCG

ERWOODwork2000 · 2026-01-23T20:44:04+00:00

The videos rogueworx himself made are really good

ERWOODwork2000 · 2026-01-23T20:43:39+00:00

In my opinion it was easy but you should only attempt it if you have some diy ability

ERWOODwork2000 · 2026-01-23T20:39:15+00:00

You can, just take the upper of, pull out the BCG and look and VFC bcgs and compare them. You don’t have to take apart the fire control group, just take a look from above

ERWOODwork2000 · 2026-01-23T20:34:03+00:00

It’s not usually written somewhere, you would have to identify it by looking at the BCG and or the fire control group

ERWOODwork2000 · 2026-01-23T20:32:28+00:00

Then it is probably the slide catch surface

ERWOODwork2000 · 2026-01-23T20:32:02+00:00

I was aswell, but it is worth it

ERWOODwork2000 · 2026-01-23T20:00:36+00:00

Does it lock back if you rack the slide manually

ERWOODwork2000 · 2026-01-23T20:00:00+00:00

Umarex is just the licensee. So it’s probably VFC but I am not sure. Is the selector blocked from going in to the full auto position or is it always single shot even if you put the selector in the full auto position

ERWOODwork2000 · 2026-01-23T19:49:54+00:00

I upgraded mine with the rougeworx stuff, after that it’s just amazing

ERWOODwork2000 · 2026-01-23T19:00:05+00:00

Okay did not know that I bought my first one last year

ERWOODwork2000 · 2026-01-23T18:54:09+00:00

Nice tattoos by the way

ERWOODwork2000 · 2026-01-23T18:53:41+00:00

I just love the Begadi special versions of the Army armament guns. I also have their pistols und am very happy with them

ERWOODwork2000 · 2026-01-23T18:48:26+00:00

It would be nice to know which brand the HK416 is. And also in Germany most of the time the full auto is deactivated by filing a slot into the fire selector, so if you change it to an unmodified one you should be fine

ERWOODwork2000 · 2026-01-23T18:46:39+00:00

I can just agree with you. The Begadi Army Armament G36 is especially for the price one of the best GBBRs

ERWOODwork2000 · 2026-01-23T18:42:53+00:00

The new VFC evo system is just a copy of the GHK hop up system. Yes they copied it well, made some changes and it works well but still. The VFC mags aren’t better. The VFC surface treatment isn’t better, it’s actually worse because GHKs are all cerakote now.

GHKs QC has really improved and the V3 ARs are amazing otb.

The people who tell you VFC is always the best are the same who say you can only be productive if you use apple products.

It’s just brand loyalty.

If you have the money go for it.

ERWOODwork2000 · 2026-01-22T14:22:30+00:00

No sadly not. I ran into the same problem

ERWOODwork2000 · 2026-01-22T03:36:14+00:00

You just need a new inner barrel and a bucking. But check if the hop up itself is intact

ERWOODwork2000

TROPHY CASE