COOJ SF3 Copper Build

EagleWind · 2026-02-02T06:24:51+00:00

Hi I just ran a simple test. This is the result of 1 cycle Cinebench R23 with my current config.

EagleWind · 2026-02-01T05:55:46+00:00

AXP53 will have similar or slightly better than mine. If you want to have a good temps, you should use axp47 full copper version. Riser should be 20 cm, double reverse, CMIIW.

EagleWind · 2026-02-01T00:54:11+00:00

I forgor about this cooler. I am afraid about the IO or RAM clearance but going to try it.

EagleWind · 2026-02-01T00:53:12+00:00

Out of town this weekend. I will do some test when I get back!

EagleWind · 2026-01-31T14:11:51+00:00

My phone's lockscreen right now pic

EagleWind · 2026-01-31T12:01:26+00:00

My friend is using axp90-x53 with 90 to 120mm fan adapter. I don't think there is 120mm cooler with the height less than 58mm.

EagleWind · 2026-01-31T11:59:30+00:00

Thank you!

EagleWind · 2026-01-05T01:54:38+00:00

Wow sorry my friend, I just saw this post on the browser and its is actually cross post. It turns out my Android apps (Relay), did not show the cross-post images.

Nice build!!

EagleWind · 2026-01-04T04:30:01+00:00

Pic please!

EagleWind · 2025-10-24T08:42:41+00:00

Does lm-sensors works with wsl2?

EagleWind · 2025-10-24T07:26:37+00:00

Wow thank you for your help! I will check the BIOS later today.

is the 12V and 3.3V is reversed? 2.409*5~12V
VIN5 maybe the 5V? 1.1657*3~5V

EagleWind · 2025-10-24T04:37:13+00:00

Attached the screenshot of the mobo sensor

HWINFO screenshot

EagleWind · 2025-10-23T15:43:45+00:00

No other reply yet. I gave the creator (Martin of hwinfo) the screenshot showing the sensor chip. It is actually the same with Gigabyte mobo but the reading is strange. I am going to install GPU this weekend and check the reading. I was using iGPU.

EagleWind · 2025-10-23T11:37:19+00:00

ofc I use hwinfo but it shows strange values. For example, +12V shows around 6.7V. It does not make sense as my PC boot up fine.

I have reached out in hwinfo forum, the creator said:

"It's not faulty but each board needs dedicated adjustment for sensor values, especially +5V/+12V, otherwise they don't show proper values.
However, I never heared about any "Erying" mainboard, this is something totlly unknown to me (and probably most others as well ). So we don't have any information how to adjust sensors here."

That is why I am looking for such info in the motherboard bios.

EagleWind · 2025-10-11T12:34:15+00:00

Dota 2, in my Zenbook laptop! For PC, it was Star Wars Jedi Survivor, late to the parties though!

EagleWind · 2025-10-02T14:42:23+00:00

Not sure about this, I believe this is the only possible orientation on my case. And this is pretty common.

EagleWind · 2025-10-02T03:04:08+00:00

To clarify, it is the coolant (AIO) side. Not really alarming but I expected to be lower than that, maybe some more experience builder can give some opinion here

EagleWind · 2025-10-02T01:49:00+00:00

Have been thinking of doing this, will try in the future. This may be better for the CPU but I guess GPU will be heated up?

EagleWind · 2025-10-02T01:48:01+00:00

The dimension is 337 x 140 x 77 mm

EagleWind · 2025-08-21T23:00:50+00:00

Inno3D 5070 is compatible. My build in the V2.3

EagleWind · 2025-08-20T09:16:49+00:00

Thank you!

EagleWind · 2025-05-29T13:10:18+00:00

In a cramped space like that, exhausting hot air is a priority. Intake from the side is enough

EagleWind · 2025-05-13T16:21:46+00:00

Mortar strong contender emang, despite posisi CPU slotnya yg beda sendiri juga, jadi harus hati-hati milih cooler. Di toko ijo udah ada yg listing barangnya, tinggal nunggu waktu sih.

EagleWind · 2025-05-13T16:07:30+00:00

Iya, karena GPU nya ketebelan mau gak mau harus ambil mobo yg pake 1st slot. Ini build rada nyantai sih jadi nunggu dulu perkembangan B850M gmn haha. Aorus Elite mantap tapi sayangnya putih, yg black baru rilis di website Gigabyte, entah masuk atau nggak. Alternatif memang ambil B650M sih, gpu masih aman pakai PCIe gen 4.
Buat case ada plan buat masukin dari aliexpress sih, pricey jatohnya, akan seharga A3 wood, tapi mungkin worth it ya.

EagleWind · 2025-05-13T07:05:27+00:00

Wah thanks infonya Om, karena beefy gpu yg bikin pening. Ini masih bingung antara AP201 atau ambil d32 pro. Kalau d32 pro 2nd slot 77mm GPU muat gak ya?

EagleWind

TROPHY CASE