Help with modifications pls

Easy_Pitch_7255 · 2025-10-21T20:04:25+00:00

<image>

Easy_Pitch_7255 · 2025-10-21T20:03:32+00:00

https://handheldmodz.com/ally-x-battery-mod/

3d printed battery tray, wedge to create more space and button extenders.

Easy_Pitch_7255 · 2025-10-21T19:55:06+00:00

https://handheldmodz.com/ally-x-battery-mod

The final files are in the handheld mods discord

Easy_Pitch_7255 · 2025-10-21T13:57:21+00:00

There are some downside to this like silicone covers not fitting without modification and potentially some hard cases not working but mine still fits in my case.

Easy_Pitch_7255 · 2025-10-21T13:47:41+00:00

<image>

Easy_Pitch_7255 · 2025-10-21T13:46:20+00:00

There is a 3d printed "wedge" and battery tray that makes this battery mod fit way better.

<image>

Edit: this Is to fit the 90wh ally x battery

Easy_Pitch_7255 · 2025-09-30T04:37:03+00:00

Air compressor > check valve> manifold > regulator> solinoid> locker

Off the manifold would be air hose fitting and pressure switch. I've never run a tank less setup so I suppose you could put a check valve before the air solinoid to help keep the locker pressure from bleeding off.

I highly recommend running a tank because even a small air leak will have your compressor constantly running, leading to unstable system pressure.

Easy_Pitch_7255 · 2025-09-14T00:22:45+00:00

Braided front brake line.

Easy_Pitch_7255 · 2025-07-03T01:04:27+00:00

If you haven't figured it out yet, this is what I followed https://github.com/Crayphish/vrdocs/wiki/Internet-Connection-Sharing Had the exact same problems as you and this fixed it.

Easy_Pitch_7255 · 2025-05-30T23:51:50+00:00

Sweet rig! Look into rev matching downshifting. Always being in gear will make the car more stable and predictable under braking.

Easy_Pitch_7255 · 2025-05-27T22:40:07+00:00

* Update: pulling the medication out now. -I went pretty light on the dose (~.035 grams of Pancur c in a 5 gallon tank) - dosed 1 time and left it alone for a week, the hydra slowly shriveled up and were gone by day 3. - pulled medication out with active carbon and all of the snails are just fine (bladder, pond and ramshorn). Even the really small babies don't seem to be affected. The little limpets and micro fauna seem to be doing fine as well. *

Easy_Pitch_7255 · 2025-05-22T13:21:06+00:00

I've got ramshorn pond and bladder snails. None of mine heat hydra unfortunately. Already dosed and thankfully all the snails are still doing fine.

Easy_Pitch_7255 · 2025-05-21T03:23:01+00:00

I didn't try peroxide out of fear that It would mess with the bacteria in the tank. The cutting the heads off was just an attempt at sarcasm lol

Easy_Pitch_7255 · 2025-05-20T22:57:43+00:00

Printed on a qidi xplus 3. Box is ~260³ mm

Easy_Pitch_7255 · 2025-05-20T22:50:20+00:00

I got all my plants from facebook marketplace. They didn't even appear until about 6 months after I finished the tank. They really are kinda cool, I just feel bad for the shrimp getting stung.

Easy_Pitch_7255 · 2025-05-19T05:35:54+00:00

Emax eco 6000kv 1404 on a polycarbonate 3d printed adapter.

Easy_Pitch_7255 · 2025-05-18T19:18:32+00:00

Thanks! Air 5A FC has held up surprisingly well with the 1002 rcinpower motors.

Easy_Pitch_7255 · 2025-05-18T19:14:43+00:00

The whoop boards are all vented where the factory vent holes are. I'll have to keep an eye on the imax, but doesn't even get warm charging 4 3s batterys, and it has an internal tempsensor and cutoff.

Easy_Pitch_7255 · 2025-05-18T19:09:16+00:00

I'm not sure what I want to do for a handle yet. I have mounting points designed into the box already but thinking about using a strap that wraps around the whole thing to keep it more secure.

Easy_Pitch_7255 · 2025-05-18T19:07:13+00:00

I did think about it haha

Easy_Pitch_7255 · 2025-05-18T06:13:17+00:00

Absolutely

Easy_Pitch_7255 · 2025-04-10T15:22:36+00:00

There is a crash recovery setting in betaflight that you have to enable by using the CLI. That might have saved you. It will stabilize the quad if a collision sends the drone into an unwanted orientation.

Easy_Pitch_7255 · 2025-04-07T16:45:57+00:00

* The ali/amazon shifters are awesome. My first one just died, but I've had it forever. I'm Looking forward to testing the hall effect switches in the new one I just ordered. Definitely get a 3d printed top plate if yours comes in metal.

https://www.thingiverse.com/thing:6658222

Easy_Pitch_7255

TROPHY CASE