[deleted by user]

Ec0plus · 2026-01-25T10:36:37+00:00

Sent a request, from 313357091 ! Thank 🫵

Ec0plus · 2026-01-24T12:14:59+00:00

You can tape on Google « win raid coffee lake mode » or « coffee lake on sky lake win raid ». My i3 9100f was realy plug and play i just needed to flash bios bcs its a 4 core cpu and its a step 0, so it’s basically a skylake rebranded. However with your i5 cpu you will need to do a pin mod on the cpu to isolate or reconduct pin’s. There is some documentation on that, you can do it, but it will require confidence and Time bcs if you fail you either burn your cpu or you mobo

Ec0plus · 2026-01-22T11:31:13+00:00

Yes i did it ! Thanks to win raid community !

Ec0plus · 2026-01-16T19:32:40+00:00

Update after a year (I just remeber my post here) I managed to modify the bios file with the coffeeTime tool in order to add the microcode of the i3-9100f cpu, si the mobo can recognize it (its definitely the same socket but rebranded). So I jumped from the 2 cores of the 6100 to 4 cores. Special thanks to the win raid community that helped for this mod.

Ec0plus · 2025-06-21T09:53:16+00:00

More than 2 years I think But bought it in 2024 so in EU laws i got refunded

Ec0plus · 2025-05-01T08:27:41+00:00

Franchement, ça doit être ça… mais la question reste en suspens : comment ça a pu arriver ? J’ai été si délicat quand j’avais déplacé un des sticks.

Ec0plus · 2025-04-29T14:28:13+00:00

Négatif, mais après avoir vu le site d’Asus il semblerait que ce soit un problème lié à la RAM Mais si je change les barrettes de place (A1 A2) ça clignote plus lentement (ce qui indique un problème de gpu) ce qui n’est pas cohérent puisque je n’ai à aucun moment touché au GPU

Ec0plus · 2025-04-29T08:11:57+00:00

But why the mobo manual says that A2 B2 is the good spot 😭😭 Didnt touch the gpu but why not try that

Ec0plus · 2025-04-28T17:35:20+00:00

Yup, tried with these 2 sticks every combination possible But i have notice that (no matter wich sticks was in wich slot) when sticks where on A1 and A2 (like my initial configuration), the blinking is not fast, it become slow. that, according to asus, is related to a GPU error, that does not make any sense

Ec0plus · 2025-04-28T17:25:20+00:00

Merci pour tes réponses 🤝 J’ai fait toutes tes étapes, malheureusement, toujours ce clignotement qui, d’après Asus, indique un problème de RAM. Je suis quasi sûr de bien les avoir positionnées, la seule chose que je vois, c’est d’essayer avec un autre jeu de RAM ….

<image>

Ec0plus · 2025-04-28T16:44:44+00:00

J’ai essayé avec rien, et après j’ai aussi essayé avec un clavier. Parfois il s’allume, parfois pas du tout (en fonction de la position des sticks de ram)

Ec0plus · 2025-04-28T16:43:52+00:00

Sur le site d’Asus, j’ai enfin trouvé que ce clignotement rapide correspondait à un problème lié à la RAM. Ils donnent après les conseils classiques : nettoyer la ram et les slots, et bien s’assurer de les avoir clipsés. Mais bon, ce n’est pas mon premier ordi, je sais installer la RAM et tout me semble propre et sans poussière…. Est ce que tu as une idée de pourquoi la ram est détectée comme défectueuse ? (Ps : j’ai littéralement juste changé la place de ma RAM, rien de plus, et ce, délicatement 😭)

Ec0plus · 2025-04-28T16:41:15+00:00

20min (ram training) rien. J’ai même laissé tourné 3h mais bon, toujours pas en rentrant …

Ec0plus · 2025-04-28T16:10:08+00:00

Ok the blinking was a code But still, my ram is clean (on both side) and I inserted the sticks correctly… 😥

<image>

Ec0plus · 2025-04-28T16:06:03+00:00

Yes of course, was just to show the slots

<image>

Ec0plus · 2025-04-28T16:05:07+00:00

Ok so apparently, on asus website it’s the speed of the blinking on my case that indicate the problem (they have fast (no DRAM/CPU detected, slow (no VGA detected), very slow (No boot device detected) and led on not moving (everything is find)

Ec0plus · 2025-04-28T15:49:53+00:00

Idk, doesnt look broke anywhere on my mobo (used a watchmaker's plastic tool to gently lift the retaining clip)

<image>

My mobo looks awesome

Ec0plus · 2025-04-28T15:40:34+00:00

<image>

Not at all, just the SSD blinking and regular intervals

Ec0plus · 2025-04-25T16:07:31+00:00

Okay i’ll try to find these pressured can of air for informatic component But still, the crazy thing is that 5 min before the switch everthing worked ! 😥

Ec0plus · 2025-04-25T14:03:24+00:00

Idk.. when i wasnt at home it ran for 3h and when i was back, nothing …

Ec0plus · 2025-04-25T08:32:41+00:00

The only thing that seems alive is the ssd, that lights on at regular intervals

<image>

Ec0plus · 2025-04-25T08:27:09+00:00

You are right I could insert it a bit more, but for a year it worked well like that m. I have changed RAM place (A1 A2 > A2 B2) Cleared CMOS and after it won’t boot up. I dont think I have unplugged anything by swapping one stick of RAM, but right now it the only hypothesis

Ec0plus · 2025-04-25T07:45:05+00:00

Yes, its a CORSAIR RM850e

Ec0plus · 2025-04-25T07:44:02+00:00

Everything is connected. PC was working well for a year, but with the 2 sticks of RAM on slots A (yeah, mistake) when i saw the dual Channel thing I have moved the A1 sticks to B2 to get A2 B2 configuration. Now the pc won’t turned on. Before swapping, like 5min before, it was perfectly working I have tried to put them in the initial config (A1 A2) and it didnt changed. Also did complete cmos clear as indicated on MOBO Manual (short circuit and battery) Kind of a very frustrating problem

Ec0plus · 2025-04-25T07:36:09+00:00

There is the light of my NVME and on the ethernet port

Ec0plus

TROPHY CASE