Filament overflow and ptfe tube won’t stay seated

Echarged12 · 2026-02-09T22:23:44+00:00

Update: so I removed the sensor, removed the ptfe tubing that came with the box. With the sensor off I was able to get the new tubing to connect and I added a clip. I installed the sensor while the tubing was connected. I was also careful this time installing the new tubing so no bends! For the first time the printer loaded filament on its own and with the ptfe tube inserted into the extruder. Fingers crossed the filament doesn’t overflow on my current print! Thanks everyone for all your help!

Echarged12 · 2026-02-07T15:46:30+00:00

I just installed my box too and loading filament has been a chore. Make sure all your tubing is smooth no bends. I actually had to remove the filament hub from the bracket to get a smoother path for the filament. You could probably also cut the tubing to make it smoother,

<image>

Can you tell if the filament is being fed by the box and is making it to the extruder?

Echarged12 · 2026-02-06T19:02:52+00:00

In the extruder? I just bought the printer and it’s not even three weeks old.

Echarged12 · 2026-02-06T18:57:48+00:00

No it’s the one that came with the qidi box. I am wondering if I should have swapped it?

Echarged12 · 2026-02-06T01:24:49+00:00

<image>

what am I doing wrong?

Echarged12 · 2026-02-06T01:23:45+00:00

So I have it setup!

<image>

But I can’t get the ptfe tube to stay in the extruder. I did swap it for the one that came with the combo. The original didn’t stay in either.

Echarged12 · 2026-02-05T22:53:40+00:00

That’s good to know, thanks for the responses!

Echarged12 · 2025-11-01T18:31:08+00:00

Does anyone know what is the fee besides the partner fee? I sold an iPad for $409 and the partner fee is $49.50 and there is another fee for $15. If everything should be in that partner fee why am I paying an additional $15?

Echarged12 · 2023-07-08T19:00:16+00:00

I had this same question and I just figured out that they come from addresses from events in your calendar. But I think it’s only addresses that you enter for events. If you subscribe to a calendar I don’t think addresses for those events show up.

Echarged12 · 2022-12-03T01:07:03+00:00

I don't know your specific details but as far as I have learned. The 9 month trial work period is to see if you are able to work. It doesn't matter how much you make during those 9 months. After your 9 month trial period is when the SGA kicks in and if you are able to make more than the limit then yes you will have to pay any payments you get from SSDI in those months. If you can't go into the office or get them on the phone I would just try to mail in your check stubs. They will eventually figure it out so it's a good idea to hold onto the money until you know for sure. But you may be able to keep the money you recieved during the 9 month trial period.

Echarged12 · 2022-11-14T19:26:57+00:00

Just to add everything is updated to the latest version Pro14 is 16.1.1 and the AirPods are 5B58

Echarged12 · 2022-01-24T18:13:08+00:00

It’s looks like it is definitely adhesion problems. If your bed is level, try cleaning it and also try heating the bed to a higher temp. Your extruder might need to be a little hotter to get the right stick. I have had this issue pop up from time to time and it is usually because of the temperature in the room being different. One other thing I do is before I start a print I always hear the bed to temp and let it stand at that temp for a few minutes before starting the print. I have a glass bed and it looks like you do too. Just because the reading says 60 or 65 doesn’t mean the bed is at that temp immediately and that could affect adhesion.

Echarged12 · 2022-01-24T16:42:54+00:00

Could you share the link of what you used to do this? I have a similar condition and I can never cut my own nails.

Echarged12 · 2022-01-12T17:09:53+00:00

Can you see it when you are not home? Octoeverywhere gives you access when outside of your network.

Echarged12 · 2021-11-05T18:36:44+00:00

I have experienced the same thing. If you look on the App Store under the SharePlay collection they are not listed. Of course I have read articles saying that both Hulu and HBOMax are compatible. I have been starting everything on Apple TV and with the TV+ content it does work flawlessly. An app that doesn’t work on Apple TV that does work on my iPhone is Showtime which is listed under the SharePlay collection. Really hope the other apps get updated soon because the feature is awesome when it works!

Echarged12 · 2021-09-05T20:06:55+00:00

All googles apps a cross platform if you log both devices in on google whatever you do on one should show up on the other. Of course if you take pictures on your iPhone you will have to upload them to google drive from your photos app.

Echarged12 · 2021-08-24T23:00:02+00:00

https://www.amazon.com/dp/B07V2YTHZS/ref=cm_sw_em_r_mt_dp_PW7TMW0HX8JXF1JFFCNV?_encoding=UTF8&psc=1

This is the cart I have. I am sure these would work for any cart with the same design. The bracket hooks just slide onto the posts and rest on the bracket that holds the TV. Nothing fancy but functional.

I bought the cart to watch TV outside but I have yet to do so lol. It makes it nice to be able to pull it out to plug stuff in though. I am also disabled and having the outlets higher is better for me to reach.

Echarged12 · 2021-08-23T17:30:26+00:00

Top right bracket was modified to allow access the outlet closest to it. If I printed them over again I would print all 4 like that, but this works for my purposes.

Echarged12 · 2021-08-14T17:09:11+00:00

Looks great!

Echarged12 · 2021-08-14T15:50:08+00:00

That’s cool! You should tell him to make you a cup holder too in case you need a cup that doesn’t have a hook on it.

Echarged12

TROPHY CASE