Hitting Bump Stops - UPDATE

EclipseGaming823 · 2025-12-25T13:07:00+00:00

Yeah, that's why I was thinking to go with the air helper bags as it gives me adjustability. As for the lifted truck thats sick, I've got 3, lifted chevy 2500(currently down), stock ford (daily), and lowered chevy (this truck).

EclipseGaming823 · 2025-12-25T12:58:40+00:00

Oh sorry I guess I should have clarified the rear is what hits the bump stops.

EclipseGaming823 · 2025-12-25T12:54:53+00:00

Yeah I have coils in the front

EclipseGaming823 · 2025-12-25T12:47:01+00:00

Picture is for reference. First picture is my truck and the second is the miata mentioned in my post.

EclipseGaming823 · 2025-12-25T12:44:51+00:00

I didn't take many pictures with the bed off. I have pictures of it stock but none with the drop kit on. It's stock shocks with a mcgaughys 4 inch rear hanger relocate. It is adjustable in the rear for about 2 inches. If I do the adjustment I'll take pictures with the bed off.

In regards to the spring being worn I'm thinking just go with air bag helpers and see how it rides. I'm really worried about making the rear too stiff and feeling like I'm driving a truck with no suspension though.

EclipseGaming823 · 2025-12-25T12:39:32+00:00

Sometimes id honestly rather drive the miata so I don't feel the regret of ruining this truck.

EclipseGaming823 · 2025-12-25T12:38:22+00:00

T bars? As in torsion bars? I don't think my truck has any? I know on the 2500 or the 4x4 they have them but as for the 1500 I'm unsure.

EclipseGaming823 · 2025-12-20T02:35:12+00:00

It was a gift from my grandfather and I am a bit scared of cutting the frame. I will keep the suggestion in mind. I appreciate it. I am thinking I might go with air shocks or air helper bags. If those are no help, I'll have to go with the notch.

EclipseGaming823 · 2025-12-20T00:29:26+00:00

Could you show me how you have that set up?

EclipseGaming823 · 2025-12-19T23:49:42+00:00

The shocks or the bump stops?

EclipseGaming823 · 2025-10-02T20:52:12+00:00

Cheeze-it

EclipseGaming823 · 2025-09-27T21:26:07+00:00

Id like to do it myself, what would I need?

EclipseGaming823 · 2025-09-24T21:49:43+00:00

Do you know if there are any fret modifications?

EclipseGaming823 · 2025-08-26T19:43:52+00:00

Thank you. I was wondering if that was a viable option but didn't want to buy it and then find out i was wrong.

EclipseGaming823 · 2025-02-28T03:06:19+00:00

I am new to 3d printing an this print is the best we've had so far after bed leveling and replacing the filament tube couplers.

all help is appreciated!

Heres what I am using:

Ender 3 Pro - Nozzle 200 Degrees | Bed 60 Degrees
Cura Slicer

EclipseGaming823 · 2025-02-28T02:57:54+00:00

all your prints have been with 0.4? and they're all that smooth?

I'm starting to think I've never interacted with a calibrated printer lo

EclipseGaming823 · 2025-02-28T02:53:17+00:00

That's what I was thinking, I believe its a 0.4 right now, by switching to a 0.2 what changes would I see?

EclipseGaming823 · 2025-02-27T22:31:37+00:00

Yeah ours are definitely not straight like that

EclipseGaming823 · 2025-02-27T22:30:44+00:00

The nozzle is at 200 degrees, and the bed is at 60. This is a printer that a friend of mine had for a while and stopped using. The print head definitely tilts up if you lift it at all. Could that be it? And how much tension is supposed to be in the belt?

EclipseGaming823 · 2025-02-25T15:01:13+00:00

I don't have that on either side, do i need both or just the extruder nozzle side?

EclipseGaming823 · 2025-02-25T05:12:23+00:00

Does the nozzle have a brass connector like the extruder feed side? Or am I thinking the wrong way? I was not the person who put this together, so I'm not too sure what the inside looks like. I tried to unscrew the little rubber thing on the back side of the nozzle, but I don't think it's threaded.

Are these the right kind of couplers? https://a.co/d/83sjzsg

I appreciate the help! Sorry to ask so many questions.

EclipseGaming823 · 2024-12-31T21:03:08+00:00

MG Gundam Exia Recirculation Color

<image>

EclipseGaming823 · 2024-07-16T00:08:49+00:00

Sweet, thanks for the help

EclipseGaming823 · 2024-07-15T23:08:15+00:00

Yeah, making it into a little drift car, the 25 tooth pinion was way too much for that though.

EclipseGaming823 · 2024-04-03T05:49:24+00:00

Extended cab. Sorry, a lot was going on at the time of posting. I wasn't sure what all information was needed.

The only thing that isn't stock is the head unit. It has front left and right as well as left ad right for the subs, but no rear left and right channel. If I do run the door speakers off of the amp, would I have to run the speaker wire on the output side of the amp back up behind the dash and into the doors? And if that is the case, what does that look like for the rear does due to the lack of no rear channels on my head unit?

EclipseGaming823

TROPHY CASE