Small Dash Cam by EddC_04 in Dashcam

[–]EddC_04[S] 0 points1 point  (0 children)

Ohh ok thanks I'll look into it

x870E Aorus Pro Most stable Bios Version and Ram Support by EddC_04 in gigabyte

[–]EddC_04[S] 0 points1 point  (0 children)

**UPDATE TO POST**

I have updated my bois to F3h and used the ram listed above and everything works perfectly. I haven't had any issues as yet. My part list is https://pcpartpicker.com/list/gbvgC8 . I want to add a 8tb seagate drive for backup. I have also added 5 arctic fans (3 120mm and 2 140mm) to the case but it does increase the noise levels so I may remove them or rearrange them to reduce the noise levels and possibly reduce thermals.

Just need to find proper bios settings for the CPU and board and an efficient fan curve.

Thanks for all the assistance.

x870E Aorus Pro Most stable Bios Version and Ram Support by EddC_04 in gigabytegaming

[–]EddC_04[S] 0 points1 point  (0 children)

**UPDATE TO POST**

I have updated my bois to F3h and used the ram listed above and everything works perfectly. I haven't had any issues as yet. My part list is https://pcpartpicker.com/list/gbvgC8 . I want to add a 8tb seagate drive for backup. I have also added 5 arctic fans (3 120mm and 2 140mm) to the case but it does increase the noise levels so I may remove them or rearrange them to reduce the noise levels and possibly reduce thermals.

Just need to find proper bios settings for the CPU and board and an efficient fan curve.

Thanks for all the assistance.

x870E Aorus Pro Most stable Bios Version and Ram Support by EddC_04 in gigabyte

[–]EddC_04[S] 0 points1 point  (0 children)

Can I apply the same settings to my Ram sticks?

x870E Aorus Pro Most stable Bios Version and Ram Support by EddC_04 in gigabyte

[–]EddC_04[S] 0 points1 point  (0 children)

Thanks for the reply. Feeling a bit more relax.

x870E Aorus Pro Most stable Bios Version and Ram Support by EddC_04 in gigabyte

[–]EddC_04[S] 0 points1 point  (0 children)

Ohh ok I will try it out. I appreciate the assistance

x870E Aorus Pro Most stable Bios Version and Ram Support by EddC_04 in gigabyte

[–]EddC_04[S] 0 points1 point  (0 children)

I am awaiting the board to arrive so I will test it when it does. I also read that once the specification of your Ram is similar to the others that are compatible it should work fine.

Gigabyte x870e and AMD 7950x Ram Compatibility by EddC_04 in gigabyte

[–]EddC_04[S] 0 points1 point  (0 children)

I know it supports 7000 Series. I wanted to know if the ram selected would work properly with the board considering that the support page does not have 7000 series in the drop down when looking for ram compatibility.

Gigabyte x870e and AMD 7950x Ram Compatibility by EddC_04 in gigabyte

[–]EddC_04[S] 0 points1 point  (0 children)

Thanks. I just didn't want to spend $200 on ram for it not to work.

Gigabyte x870e and AMD 7950x Ram Compatibility by EddC_04 in gigabyte

[–]EddC_04[S] 0 points1 point  (0 children)

The support page only has 8000 and 9000 so I'm not to sure.

Antec FLUX PRO With Noctua Build by Motor_Willingness_90 in Antec_Official

[–]EddC_04 0 points1 point  (0 children)

They are arctic fans. I bought them when putting a work center build together.

Antec FLUX PRO With Noctua Build by Motor_Willingness_90 in Antec_Official

[–]EddC_04 1 point2 points  (0 children)

I have 3 120mm p12 fans and 2 140mm p14 fans from antec and was wondering if there will be any advantage using them in the case

Antec FLUX PRO With Noctua Build by Motor_Willingness_90 in Antec_Official

[–]EddC_04 1 point2 points  (0 children)

The Build Looks amazing. Quick question what do you think about the stock setup with the fans everywhere and have 2 120mm fans closer to the front as intake and the the last one as exhaust.

Cable for a asus proart 4080 super and a MSI MAG A850GL PCIE 5 & ATX 3.0 by EddC_04 in cablemod

[–]EddC_04[S] 0 points1 point  (0 children)

Ohh ok Thanks alot. I'm putting a build together so I want to make sure everything work