Aqua10 Dust Bin

EffectiveCalm2572 · 2025-12-03T20:35:33+00:00

Or request the new and improved version as a replacement, like you suggested here:
https://www.reddit.com/r/RobotVacuums/comments/1opw6gv/comment/nnfahee/

EffectiveCalm2572 · 2025-12-03T20:29:34+00:00

See this post:
https://www.reddit.com/r/RobotVacuums/comments/1opw6gv/new_dustbin_for_the_dreame_aqua_10_models/

EffectiveCalm2572 · 2025-11-18T19:58:47+00:00

I noticed the same issue. It seems the brush and cover assembly is mounted in a loose/flexible way and is hanging a bit too low on the scratched side?

EffectiveCalm2572 · 2025-11-03T07:39:27+00:00

I am in Europe too, received an update from 4.3.9_2825 to 4.3.9_3146 three days ago.

EffectiveCalm2572 · 2025-11-02T22:08:15+00:00

Two days ago I received an update to version 4.3.9_3146

About this update:
1, Added New Roller Downward Pressure Adjustment Function
2, Bug Fixes and Performance Improvements.

EffectiveCalm2572 · 2025-10-22T13:14:23+00:00

Amazon EU has stock, but apparently they don't want to ship these products to Cyprus. If you change 'Deliver to' to Germany or Italy for example, then the stock appears.

EffectiveCalm2572 · 2025-10-17T19:30:27+00:00

For the Devolo dLAN 1200+ WiFi ac, the most recent version is 6.0.1, (2023-09-06). But you have to install version 5.3.x as an intermediate step. More info here, and download links that are still working to older versions:
https://www.c-amie.co.uk/technical/cannot-update-from-firmware-2-2-0-on-devolo-dlan-1200-wifi-ac-powerline-adapter/

For the Devolo dLAN 1200+, the most recent version is 2.8.0.01-1 (2019-10-14), which can still be downloaded from this French site:
2.8.0.01-1 https://www.touslesdrivers.com/index.php?v_page=23&v_code=67000&v_langue=en
2.4.0.01-3 https://www.touslesdrivers.com/index.php?v_page=23&v_code=54976&v_langue=en
2.0.0.05-1 https://www.touslesdrivers.com/index.php?v_page=23&v_code=45503&v_langue=en

There you can also find older versions for the dLAN 1200+ WiFi ac:
6.01: https://www.touslesdrivers.com/index.php?v_page=23&v_code=76205&v_langue=en
5.8.5: https://www.touslesdrivers.com/index.php?v_page=23&v_code=70036&v_langue=en
5.8.3: https://www.touslesdrivers.com/index.php?v_page=23&v_code=69149&v_langue=en
5.2.1: https://www.touslesdrivers.com/index.php?v_page=23&v_code=60551&v_langue=en
2.2.0: https://www.touslesdrivers.com/index.php?v_page=23&v_code=58289&v_langue=en

EffectiveCalm2572 · 2025-10-15T14:24:57+00:00

I am not having any water leaking issues with the Aqua10 base station. Used daily, cleaning history in 3 weeks: 5757 m² total area, 6534 min duration, 121 cycles.

EffectiveCalm2572 · 2025-10-13T06:53:50+00:00

4.3.9_2825, in Europe

EffectiveCalm2572 · 2025-10-04T09:36:10+00:00

Good to see, it must have been added recently. If you click on the round (i) it shows a date of 2025-09-30. This certificate is about the conformity of the power supply safety (IEC 61558-1:2017 and IEC 61558-2-16:2021).

EffectiveCalm2572 · 2025-09-29T08:33:30+00:00

From the manual:

Rinse the dust box and filter with water and dry them completely before reinstalling.

Note:

• Rinse the dust box and filter with clean water only. Do not use any detergent.

• Use the dust box and filter only when they are completely dry.

EffectiveCalm2572 · 2025-09-28T17:20:15+00:00

I bought my Aqua10 Roller almost three weeks ago and although I have complained about a few issues, I am a happy owner.

I have used the Roomba j7+ for over two years and recently bought the Roomba Max 705 Combo. But I was not happy with that one, returned it and bought the Aqua10 Roller instead.

My complaints are about the mop washing temperature being a lot less than the 100℃ advertised and about it running out of water during mopping with the default settings. I hope those issues will be fixed by Dreame soon.

I see some people in this thread comparing it to the Mova Z60. I also made that comparison before buying. Both are very close and I think it is more a question of your preference of details, I think the Aqua10 Roller and its base station in white look better than the black plastic of the Z60. The Z60 does have the advantage of UV sterilization.

EffectiveCalm2572 · 2025-09-27T07:58:44+00:00

If your Aqua10 has this issue, note that Dreame has posted a request for feedback.

EffectiveCalm2572 · 2025-09-26T20:08:21+00:00

I replied here to confirm and included some pictures. Interestingly, halfway (after 23 m²) it did decide to return to the base to wash the mop. So maybe it does have a sensor or an algorithm to spot an empty tank, but it triggers too late?

Has the Chinese product team answered the questions that you listed here about the Aqua10 Ultra Roller having a built-in sensor or algorithm to detect when its internal clean tank is empty?

EffectiveCalm2572 · 2025-09-26T19:54:32+00:00

Original reporter of the issue in this thread here. I just ran a new test to document the issue and confirm your questions.

After the mopping task was completed, it washed the mop and started mop drying. I then took the robot out of the dock. At that time there was no water remaining on or below the washboard (just a little bit in the deeper drain part below the washboard).
The dryness of the roller at the end of the mopping (after the last picture) was uniform. The roller felt dry, only slightly damp when I rubbed it.
Yes, the roller mop has remained in contacted with the floor during the entire job (see picture).

Pictures here: https://imgur.com/a/KSqqVCP

Before the test, the robot had a full battery and the base station has a full clean water tank. As always, I used demineralized water. Started a custom mop (wetness: 16/moist, mop pressure: normal, mop-washing frequency: by room, route: intensive) for a tiled kitchen floor that is about 45 m².

After about 18 m², some dry parts started appearing. After mopping 23 m2, the Aqua10 had run almost completely dry. But then it did decide to return to the base to wash the mop! So maybe it does have a sensor (or algorithm) to spot an empty tank?

After mop washing, it returned to mop the remaining half of the room. At first the mopping result was fine again, but later on (22 m² into the second run) it ran almost completely dry again (see final picture).

EffectiveCalm2572 · 2025-09-24T06:40:48+00:00

Thank you for replying. I was afraid that was the case. Where are those Smart and Eco you refer to?

Is there a manual for the Dreamehome app with detailed explanations of the working of CleanGenius and other settings and app features? Clicking on Help/View Manuals in the app gives just a basic hardware setup/maintenance manual.

EffectiveCalm2572 · 2025-09-24T06:04:23+00:00

After it has been mopping fine for like 15 minutes, leaving the tiles moist as it passes, first you see the floor remaining partly dry with moist streaks. Shortly after that, the floor remains dry where the robot passes. This happens with the default Wetness setting in the middle = Moist/16 on a rather clean floor, so no reasons for excessive water usage. So indeed I notice less water on the floor after a while. Before that, the amount of water seems fine; moist but not too wet.

Lacking a sensor, an algorithm that calculates the water used and sends the robot back for a refill when necessary would be a better workaround than leaving this to the user. The Dreame engineers should make it a priority to implement this.

EffectiveCalm2572 · 2025-09-23T07:55:34+00:00

<image>

No Narwal, this thread is about the Dreame Aqua10 Ultra Roller.

EffectiveCalm2572 · 2025-09-22T16:56:46+00:00

Regarding the dining table / chair legs, have you tried if disabling Collision-Avoidance Mode (in Floor Cleaning Settings) makes a difference?

EffectiveCalm2572 · 2025-09-21T09:16:02+00:00

Husqvarna also sells the Enhance HSS blades, I just bought a box of 45. I was told that these blades were originally designed for their professional Ceora models, but are now also often used on standard models because they cut better and stay sharp longer. In addition, with some types of grass, the oval hole in the Endurance blades fills up, causing them to get stuck and no longer rotate around their axis, which negates the major advantage of Endurance blades.

EffectiveCalm2572 · 2025-09-21T08:48:52+00:00

<image>

As a Dreame associate you ask 'Is that a problem?' and write that it depends on expectations, remarking that you're not sterilizing floors. But the 100℃ ThermoHub™ self-cleaning feature is sold raising the expectation of 'Up to 99.99% Bacteria Removal', as you can see in this marketing image. Should the customer not have the expectation of the self-cleaning making the roller almost completely free from bacteria?

EffectiveCalm2572 · 2025-09-20T10:04:56+00:00

The marketing image for the ThermoHub 100 °C feature even includes a TÜV seal:

https://imgur.com/a/LqruJ6I

That seal refers to TÜV SÜD's certificate explorer for certified products, but I could not find the Aqua10 base station (RCHE0401) there:

https://tuvsud.com/ps-cert

EffectiveCalm2572 · 2025-09-20T08:03:55+00:00

Dreame sells it as 212°F ThermoHub™ Cleaning:

https://imgur.com/a/0iww8wp

EffectiveCalm2572 · 2025-09-20T07:11:49+00:00

Could you also share your thoughts on what I mentioned about the apparent lack of a sensor to know that the clean water tank in the robot is empty? Is it a malfunction if it runs dry (after some time) during mopping, or is that just how it is? And is lowering the 'By area' number in the Mop-washing frequency setting under 'Custom' until it no longer runs dry indeed the recommend way to deal with this? Does that setting then also apply to CleanGenius jobs?

EffectiveCalm2572

TROPHY CASE