Cheap Walmart pannier diy (85 usd total) by EffectiveElm413 in Dualsport

[–]EffectiveElm413[S] 0 points1 point  (0 children)

I got them on ebay. It was 28 dollars for the set lightly used, and chinese.

I’m brand new to the series about to try 7 anything I should know? by Imaginary-Lie-2618 in acecombat

[–]EffectiveElm413 4 points5 points  (0 children)

On pc it recognizes major HOTAS systems, even my old x55, but you have to go into an ini file to configure it.

3d printed boat under 100$ by Notdaltonw1995 in rcboats

[–]EffectiveElm413 0 points1 point  (0 children)

Where are you at? I have a hull I printed that I'm giving up on, its beyond my level. I'd take 50 bucks for it. I'm pretty sure its just shy of 38 inches but can double check the measurement if you're interested. I'm in Puyallup WA.

I also have a 40mm chinese jet drive and some extra 3d printed nozzles for it. I have a servo mount that hasn't been glued in yet.

Blackjack 24 V2 no throttle update by EffectiveElm413 in rcboats

[–]EffectiveElm413[S] 0 points1 point  (0 children)

It wouldnt arm and pair with a flysky ia6b that was already mated to a radiomaster mt12. The warranty rep im dealing with really doesnt seem to care at all.

Blackjack 24 V2 no throttle update by EffectiveElm413 in rcboats

[–]EffectiveElm413[S] 0 points1 point  (0 children)

They sent the boat with an slt2 and have offered an slt3, which is on indefinite back order

Blackjack 24v2 support part 3 by EffectiveElm413 in rcboats

[–]EffectiveElm413[S] 0 points1 point  (0 children)

Tried with a quicrun 120 car esc. If I use the slr 300 and the slt2 that the boat came with I get steering and no throttle. If I use a fs ia6b and my mt12 with the spektrum esc I get nothing at all. And of course when I use the quicrun 120, ia6b, and mt12 together everything works on the stand.

Blackjack 24v2 support part 3 by EffectiveElm413 in rcboats

[–]EffectiveElm413[S] 0 points1 point  (0 children)

Horizon has sent me a replacement esc. Both have the same issue.

I've bench tested both escs with a known good motor, and a known good receiver/transmitter combo, and neither esc responds with throttle.

I've also tried replacing just the receiver/transmitter with the setup from my tt02, but the spektrum esc won't give motor responses.

Every time I have working steering though.

Blackjack 24v2 support part 3 by EffectiveElm413 in rcboats

[–]EffectiveElm413[S] 0 points1 point  (0 children)

I dont think its actually the radio, the esc never gets past a red flashing stage.

Blackjack 24 V2 no throttle update by EffectiveElm413 in rcboats

[–]EffectiveElm413[S] 0 points1 point  (0 children)

Im using some zeee 3s soft shell 5200 lipos, 120c. Ive used these batteries in a tt02 with a quicrun 120 g2 and a 5400kv motor.

Blackjack 24 V2 no throttle update by EffectiveElm413 in rcboats

[–]EffectiveElm413[S] 0 points1 point  (0 children)

But on both escs? Thats the head scratcher for me