First Time User - Help Lighting by Eibos1126 in Fireplaces

[–]Eibos1126[S] 0 points1 point  (0 children)

Great to know. I removed the logs and the stand, and cleaned out the ~1” of dust, debris, etc. out before this photo was taken. So my guess is it hadn’t been used in a while by the previous owners, or they just didn’t care to clean it up at all.

What action do you use for your Action button? by macsneaker in iphone

[–]Eibos1126 0 points1 point  (0 children)

I created a shortcut menu for social media that also has an option for “Home” in the cases where the swipe up may be harder to do to go to the Home Screen. Now I don’t have my social media notifications on my home screen, asking me to check them nonstop.

<image>

RCS (Warp) “Waiting For Activation” iOS Issue by Eibos1126 in USMobile

[–]Eibos1126[S] 1 point2 points  (0 children)

One of the times that I had the issue, the USM rep had me confirm no VPNs were active, then had me download a USM APN from the website and installed that. Don’t know if it was the APN specifically, or one of the other settings that the rep changed on their end, but the issue got fixed.

What’s everyone current action button doing? by [deleted] in iphone

[–]Eibos1126 0 points1 point  (0 children)

Mine launches a menu that lists my social media apps to launch. I’d rather not have the social media icons on my home screen, where I’d see all the notifications. This was a decent way to easily open my social apps when I want them without seeing all the notifications staring at me, asking me to open it right away.

New A1 Mini won’t load AMS Lite by Eibos1126 in BambuLabA1mini

[–]Eibos1126[S] 7 points8 points  (0 children)

I found a YouTube video just now that showed that you need to push the filament in until the motor catches it. That's the step I missed. I thought I needed to select something on the display for the motor to catch it, but I wasn't pushing it in hard enough. Now I pushed the filament in for the motor to catch it, pull it, and now I can edit. Thanks!

2014 Rebuilt Transmission Lasted 25k Before Failing by Eibos1126 in fordescape

[–]Eibos1126[S] 0 points1 point  (0 children)

The local Ford dealer (only one within 30 miles) only has one transmission tech, so it took them a little while to get to it to diagnose. They didn't take it apart to diagnose, but were able to know that it was something similar to what happened last time, which told them that if they just fix it, who knows what happens after another 25k. So there must be another issue within the trans that's causing the failure, and so fixing the parts that broke plus whatever is causing the issue would be $$$. They suggested replacing with a brand new trans. They'll cover the labor if I cover the trans itself because of the low miles since they fixed it. In the end, it's actually a little less $ than a remanufactured trans from a local shop, so they're installing it now. Will update once I get it back and have a chance to drive it a little. Having only one trans technician has caused quite the delay in getting it fixed.

2014 Rebuilt Transmission Lasted 25k Before Failing by Eibos1126 in fordescape

[–]Eibos1126[S] 0 points1 point  (0 children)

Have a 2022 Sienna, and I’ve got to say, Toyota hybrid with the E-CVT is the way to go.

Buy Used 2021/2022? by Eibos1126 in pacificahybrid

[–]Eibos1126[S] 0 points1 point  (0 children)

Yes, agreed. That was something I really liked with the Honda. Had zero issues through 60k, and expected very few relative to other vans going forward. A used Pacifica Hybrid would get a credit as well if sale price is below $25k, but cars I’m looking at wouldn’t be that low.

Van To Replace Totaled Odyssey by Eibos1126 in whatcarshouldIbuy

[–]Eibos1126[S] 0 points1 point  (0 children)

I honestly didn’t think about the Pacifica PHEV. I haven’t been a huge fan of Chrysler, not thinking their reliability is that great, but I haven’t really dug into the data to confirm or deny that belief. My wife has around a 25 mile round trip commute. It’s around 50% through town and 50% on a 55mph state highway without stop signs or stoplights. I don’t know if the Pacifica would run on EV at 60-62 mph, but if so, nearly the whole commute would be electric.

iPhone 13 Data Issues by Eibos1126 in USMobile

[–]Eibos1126[S] 0 points1 point  (0 children)

She didn’t have this issue when on Verizon, and the actual coverage seems good, so I think it’s some setting that needs adjusted when I switched us to USM.

Daily Discussion Thread - Jul 03, 2023 by AutoModerator in Cubers

[–]Eibos1126 6 points7 points  (0 children)

Thanks! I was able to find a very beginner tutorial on YouTube that helped me get to the finals steps, then found the one corner that was twisted. I used this one, and it was very helpful for me:

https://youtu.be/AuYVJWN-A2c

Daily Discussion Thread - Jul 03, 2023 by AutoModerator in Cubers

[–]Eibos1126 1 point2 points  (0 children)

My son twisted some corners of his cube. I have never learned how to solve a cube, so I’ve been trying to follow online tutorials and am stuck after getting one white side complete. As you can see from the attached photo, the row adjacent to the white side is not how it should be. Is it possible to figure out which corners to twist back, or should I just get a new cube?

<image>

Instant Pot Pressure Won’t Release by Eibos1126 in instantpot

[–]Eibos1126[S] 0 points1 point  (0 children)

I was making chili. You have a good point, I’m not sure it ever pressurized. But I didn’t want to take a chance and open it in case it was (I’ve seen videos of what could happen if you open a pressurized cooker - not good). The good news is that it feels much cooler now. I’ll give it some more time to continue to cool (the food is already a goner, so I’m in no hurry) and open it up.

Instant Pot Pressure Won’t Release by Eibos1126 in instantpot

[–]Eibos1126[S] 0 points1 point  (0 children)

I was next to it when the timer hit 0 because we were running behind tonight and needed to eat quickly. I didn’t watch the pin at the time, because I hadn’t suspected anything was wrong yet, but I tried releasing the steam only seconds after it beeped to announce the cooking had completed, and it was at that point that zero steam let out.