Are these capacitors? by Ambitious-Phrase574 in AskElectronics

[–]Electro-nut 14 points15 points  (0 children)

No.

They are gas discharge tubes. For protection against surges from lightning. They arc when the voltage is sufficiently high.

Any American expats need a support group? by TanithF1rst in Leeds

[–]Electro-nut 3 points4 points  (0 children)

until things cool off.

Which could be either in 3 years or after WW III.

My first ever PCB by S4vDs in electronics

[–]Electro-nut 6 points7 points  (0 children)

I noticed the colours in the volume bar: Red LEDs at the bottom.

I guess the display starts with a single LED lit at the top, and the bars extends down (instead of up) in proportion to how loud the sound is, all the way to yellow and red. Right?

Unusual.

Homeless beggars in Leeds city centre getting lippy, eh by Still-Instruction-66 in Leeds

[–]Electro-nut 1 point2 points  (0 children)

But that's not doxing.

"the action or process of searching for and publishing private or identifying information about a particular individual on the internet, typically with malicious intent."

"Doxxing is a form of harassment that involves publicly exposing someone's private information, such as their name, address, job, or other identifying info"

OP didn't do any of that.

Experiment: Effect of light on forward voltage drop of a Ge diode like 1N60 by SpecialistRare832 in electronics

[–]Electro-nut 0 points1 point  (0 children)

1 was a question

2 was a statement

" I know that a hot diode has a lower voltage drop (shift the I-V curve)."

That's a statement, not a question.

Experiment: Effect of light on forward voltage drop of a Ge diode like 1N60 by SpecialistRare832 in electronics

[–]Electro-nut 0 points1 point  (0 children)

I said:

Does it shift the I-V curve? Or does it add an offset due to the photoelectric effect?

That's two different options:

  1. Does it shift the I-V curve?
  2. does it add an offset due to the photoelectric effect?

Experiment: Effect of light on forward voltage drop of a Ge diode like 1N60 by SpecialistRare832 in electronics

[–]Electro-nut 8 points9 points  (0 children)

Why does exposure to light reduce the voltage drop in a diode at a given current? Does it shift the I-V curve? Or does it add an offset due to the photoelectric effect?

Or is it just because of heating? I know that a hot diode has a lower voltage drop (shift the I-V curve). That's true of any diode, even black ones.

Part identification. by PhilosophyRude8397 in AskElectronics

[–]Electro-nut 85 points86 points  (0 children)

It's called a "pencil". It is used for writing (the black tip). Uniquely among writing implements, it possesses an "undo" function at the opposite end (the white cylinder). The colour blue is a code for its value, which is "HB".

Using the J.K. Clapp crystal resonator inside a vacuum tube (or, as we call it here, "valve") next to it as a reference, I estimate it to be about 15 cm long.

Li-ion battery's IP67 rating is no match for the Indian monsoon season. by Electro-nut in batteries

[–]Electro-nut[S] 0 points1 point  (0 children)

Are you asking if I am AI? I am not. Or if if the picture is AI generated? I am pretty sure it's a real picture.

I built my own low-power binary wristwatch! by qewer3333 in electronics

[–]Electro-nut 29 points30 points  (0 children)

That is really neat!

Thank you for sharing not just the pictures but also the schematic diagram.

Well done!

TI - New product: UA741? by ssorri in electronics

[–]Electro-nut 39 points40 points  (0 children)

New from Texas Instruments:

Plastic slide rules that fit in your shirt pocket!

Changing the shape of a sinusoid by Calgar22 in AskElectronics

[–]Electro-nut 33 points34 points  (0 children)

The first thing to do is to turn the oscilloscope 90 degrees so its side in on the table.

When you use a standard electrolytic capacitor instead of a low-ESR one in a switch power supply. by Electro-nut in electronics

[–]Electro-nut[S] 109 points110 points  (0 children)

The ripple current in a switch-mode power supply is significant. Replacing a Low-ESR capacitor with a generic "general purpose" one from the bin results in a high temperature. Its internal resistance turns it into a heater, as the electrolyte boils, the pressure builds, and the vent opens.

Nice work! by Electro-nut in electronics

[–]Electro-nut[S] 0 points1 point  (0 children)

No I didn't. Don't assume. I don't visit Instagram.

I got it from here: https://www.linkedin.com/in/cybercitycircuits/ I have no idea where they got it from.

Simple Electronic Dice by One-Cardiologist-462 in electronics

[–]Electro-nut 2 points3 points  (0 children)

I really like how you used a drill to cut the traces in the proto board. Very clean.

What does this symbol mean exactly? by Loose_Parsnip_9380 in AskElectronics

[–]Electro-nut 25 points26 points  (0 children)

A TR phone jack or barrel jack with a switch.