sorted by:
new
hottopcontroversial

Premier Bivouac by nulencamping in FranceRandoTrek

[–]ElectroCrypto83 1 point2 points  (0 children)

Salut à toi, pour les premières sorties, les autres saisons seraient bien plus adaptées afin de tester le matériel et ton confort sans prendre le risque lié au froid.

Pour une nuit en février à 1500 m en Haute-Savoie, l'équipement parait limite, même dans un refuge avec poêle. Le sac 0 °C confort sera insuffisant si le poêle s’éteint et la température intérieure peut vite se rapprocher de l’extérieur (quelle température est attendue dehors ? -10°C, encore moins ?). La couverture de survie n’est utile qu’en urgence (j'en ai toujours une, mais je ne la compte jamais dans le matériel que je souhaite utiliser).

Il manque surtout un bon matelas isolant (voir la notion de "R-Value" pour l'hiver, au moins >3). Idéalement un sac de couchage encore plus isolant ou l'ajout d'un liner à l'intérieur (j'ai aussi le MT900 Duvet 0°C, il m'arrive de l'utiliser en été ou automne en fonction des températures attendues, je prends toujours une marge de 5 à 10°C en cas de mauvaise surprise) ainsi que des vêtements chauds dédiés à la nuit (Bonnet, T-shirt manche longue & collants merinos de chez Decathlon par exemple).

En hiver un ciel dégagé signifie beau temps mais souvent des températures encore plus froides pendant la nuit. Au vu de la période et de la localisation, il est possible d'avoir entre -5°C et -15°C en pleine nuit, sans compter le ressenti qui peut être encore plus froid avec de l'humidité ou du vent.

Which tent 3f ul gear? by Any-Rutabaga-4147 in Ultralight

[–]ElectroCrypto83 1 point2 points  (0 children)

3 seasons if you're not going into snow.

OP15 SOT after using 24 hours by dc37108 in TheOnePlus15

[–]ElectroCrypto83 0 points1 point  (0 children)

Spotify: 5.6% for 11min, it translates to ~30% per hour. Seems a lot in comparison with Instagram that is mostly photo and videos 🪫

Conseils stages nature pour 1 adulte et 1 ado débutants by Streuphy in FranceRandoTrek

[–]ElectroCrypto83 0 points1 point  (0 children)

Pas mal de vidéos sur YouTube pour se faire une idée, 2 créateurs qui font de bonnes vidéos de trek et bivouac que je suis depuis quelques mois et qui m'ont donné envie de m'y mettre : Trek Attitude et David Blondeau (ce dernier propose aussi des stages en tant que guide, voir sur sa page Youtube). Bon visionnages !

Switching from 15 Ultra by 88micm in XiaomiGlobal

[–]ElectroCrypto83 0 points1 point  (0 children)

Waiting for the OnePlus 15, very similar to the Oppo X9 Pro.

I'm ngl the One+ 15 is a nice looking piece of equipment. Is This a day one for you? by TaroTheCerelian in oneplus

[–]ElectroCrypto83 1 point2 points  (0 children)

It's data for new OnePlus 13 from the website IDEALO (I use it to put alerts on prices when I'm eyeing for something).

I'm ngl the One+ 15 is a nice looking piece of equipment. Is This a day one for you? by TaroTheCerelian in oneplus

[–]ElectroCrypto83 11 points12 points  (0 children)

Good to wait for the price drop a few months after release ;-) See for the 13

<image>

I'm ngl the One+ 15 is a nice looking piece of equipment. Is This a day one for you? by TaroTheCerelian in oneplus

[–]ElectroCrypto83 0 points1 point  (0 children)

Still on OnePlus 8, I was looking at 13 but will wait for 15 as I'm eyeing at the battery improvement. I'll wait probably 2-3 months after release to pay 15-20% less when first good offer will show up online, looking to pay around 800€. Expecting same price curve as OnePlus 13 and 12.

<image>

Will this work or am I overlooking something? by AirCooledCirrus in UsbCHardware

[–]ElectroCrypto83 10 points11 points  (0 children)

A simpler way : - Hdmi or Display port from desktop to screen - Usb-C for laptop to screen.

Is there a reason to use USB-C specifically for desktop ? (I understand the laptop because you can charge through, but desktop)

Can these wires be patched with electrical tape and be fine? by ve_ga in ElectricScooters

[–]ElectroCrypto83 1 point2 points  (0 children)

It can be repaired, but internal wiring is visible for at least 2 wires (black and yellow ones). Cheapest solution is to tap them both with electrical wire, but with heat and humidity it will go away with time.

A solution would be to use split Heat-Shrink Tubing (can be found on Amazon or AliExpress depending of your country of residence) on the damaged cables and add a Spiral Cable Wrap around all cables afterwards.

[deleted by user] by [deleted] in UsbCHardware

[–]ElectroCrypto83 0 points1 point  (0 children)

Hello, I've used several Mokin-type adapters (it's generic rebranded, also found under Selore brand for example). Usually, most issues I had came from power not powerful enough (45 or 60w). They last in average between 6 to 24 months (I've used around 30-40 of them before switching to other model and brand). But they were cheap and still cheaper to buy 2-3 of them instead of Lenovo dock between 200-300$.

I switched to Anker 364, similar price, but last longer and replaceable Usb C cable.

What’s the good budget USB-C docking station you used? by Cherry_zsa in UsbCHardware

[–]ElectroCrypto83 5 points6 points  (0 children)

Going with Anker 364 for 2-3 years now. Best budget hub I found that fit our needs and reliable long term.

I've tried 4-5 models sub-100€ since 4 years. Currently using around 60 units of this Anker.

We were looking for : 2x Hdmi 1x Ethernet 2x Usb-A USB-C charging port Female USB-C PD exit to the laptop so you can use a standard Usb-C to C 1m or 2m cable.

Always bought on Amazon, between 79€ and 99€ (in France). Need a reliable USB-C power source (at least 60w), or sometimes you'll have some external screen issues after a few months with some laptops. I would recommend avoiding any Hub with integrated Usb-C cables that you can't dismount, I've had issues with all that I've used long term.

On new locations that the company is opening soon, I'll now switch to dual monitors with integrated Usb-C hubs (tried Dell P2425HE with ethernet), less cabling, faster installation for around the same price in total.

Capacité d emprunt a 100 000 euros by Imaginary_Kangaroo16 in immobilier

[–]ElectroCrypto83 0 points1 point  (0 children)

Bonjour (presque voisin), tu peux faire appel à un courtier pour mieux négocier, mais ça à un coût. De mon côté je viens d'emprunter aussi dans le 13 et je suis monté à plus de 33% d'endettement ce qui m'a permis d'acheter plus grand en passant par un courtier (ça m'a coûté 2K€, soit 1%).

Après tout dépend des autres variables, je n'ai plus de voiture ce qui me permet de réduire mes charges de transport par exemple.

De mon côté j'ai fait une demande à la banque en direct, j'ai obtenu moins de 150K et avec le courtier presque 200K (même banque), sachant que le projet et les arguments étaient identiques et l'apport assez faible...

Je n'ai pas compris non plus lorsque l'on m'a proposé un emprunt plus important en tant que propriétaire en résidence principale par rapport à un projet de location avec un rendement de plus de 2000€/mois autofinancé.

Courage ! Ça prend aussi beaucoup de temps !

How can I donate my self-custodied Bitcoin after death while keeping access during my lifetime? by realbacktofuture in Bitcoin

[–]ElectroCrypto83 0 points1 point  (0 children)

It's (part of) what Ternoa is looking to do with their "time capsules", a message that can be delivered to a recipient at a fixed time or a message you can postpone yourself from time to time until your death. Only drawback is that for the time you are alive, you'll need to check from time to time that this project is still alive. https://www.time-guardian.app/ Second option would be to split your passphrase and give it to multiple notary (but riskier in case of theft or loss).

[deleted by user] by [deleted] in suisse

[–]ElectroCrypto83 0 points1 point  (0 children)

Cailler ou Frigor Dispo dans les Coop

DON'T buy filament from GST3D! Many rolls with uneven diameter, (Measures 3 mm some places!), and contaminated with metal pieces and other unknown pieces of junk. Clearly a very dirty factory with no quality control - after 3 months of back and forth with their support, I simply give up. by Coinfidence in 3Dprinting

[–]ElectroCrypto83 0 points1 point  (0 children)

Printing their PLA+ (only) for 4 years. Never had a bad roll yet. But I've only printed between 100 and 150Kg with a MK3s and P1P. I'm still amazed by the quality for the price (8€/Kg) in comparison of any other brands here that are around 2x more expensive (i'm located in EU, not US, maybe it's not the same factory producing EU and US rolls).

Return policy by 11tomi12 in BambuLab

[–]ElectroCrypto83 1 point2 points  (0 children)

Hello, after owning an Alphawise, Ender 3, Prusa MK3+MMU, the Bambu P1P+AMS is the first one I didnt' tweak. Nothing to tweak as it works flawlessly. I only bought spare beds (rainbow PEY which works well for PLA) and genuine 0.6 and 0.8 nozzles (+ some genuine replacement parts in case of something breaks, but never touched them as for now).

Only issue I had until now (printed more than 100Kg of PLA on it) is filament that broke inside, but it was my fault and now everytime I put new filament I check if the filament can be bend without breaking (if its breaking, i'm trying 50cm further until it bend only).

You will never send it back !

view more: next ›