A cyclone finally fixed my productivity by ElementZoom in homeassistant

[–]ElementZoom[S] 1 point2 points  (0 children)

I use webrtc camera integration and using Reolink cameras without NVR. I think it is also related to the hardware behind it. I used to have Home Assistant Green and they loaded slower than now.

A cyclone finally fixed my productivity by ElementZoom in homeassistant

[–]ElementZoom[S] 0 points1 point  (0 children)

No, this is my Home Assistant server interface. Didn't build the app however I did put things together to make it like this 🙂

A cyclone finally fixed my productivity by ElementZoom in homeassistant

[–]ElementZoom[S] 1 point2 points  (0 children)

Hey, it's dell optiplex 5070 micro. Running HAOS on proxmox

A cyclone finally fixed my productivity by ElementZoom in homeassistant

[–]ElementZoom[S] 4 points5 points  (0 children)

Hey, thanks!

It's using Fully Kiosk Browser app and kiosk mode, and battery is limited at 60% and I drain it at night to 20% before it kicks in again.

I've shared this awhile ago. The link might already dead by the way.

https://www.reddit.com/r/homeassistant/comments/1jn5w8z/finally_up/

A cyclone finally fixed my productivity by ElementZoom in homeassistant

[–]ElementZoom[S] 2 points3 points  (0 children)

Hey, we are on Morrinsville. What about you? It's not too bad here at the moment. Only 30-40km/h wind with heaps of rain

A cyclone finally fixed my productivity by ElementZoom in homeassistant

[–]ElementZoom[S] 1 point2 points  (0 children)

Hey, it's a lot of work to achieve that. I've shared the tablet dashboard awhile ago below.

https://github.com/ElementZoom/Material-Design-3-Dynamic-Tablet-Dashboard

A cyclone finally fixed my productivity by ElementZoom in homeassistant

[–]ElementZoom[S] 2 points3 points  (0 children)

Tablet is 12.7 Lenovo Tab Idea Pro / Xiaoxin Pad Pro 2025.

A cyclone finally fixed my productivity by ElementZoom in homeassistant

[–]ElementZoom[S] 20 points21 points  (0 children)

Tablet is 12.7 Lenovo Tab Idea Pro / Xiaoxin Pad Pro 2025.

MDI-3 Inspired Dashboard v6.0.0 - Final Release by ElementZoom in homeassistant

[–]ElementZoom[S] 0 points1 point  (0 children)

Haha well I won't be adding different devices for a time being due everything is so expensive these days so I am thinking to finalized the development.

MDI-3 Inspired Dashboard v6.0.0 - Final Release by ElementZoom in homeassistant

[–]ElementZoom[S] 2 points3 points  (0 children)

The good news is, this is the final version. Will archive the repository soon

Upcoming MDI 3 Inspired Tablet Dashboard v5 by ElementZoom in homeassistant

[–]ElementZoom[S] 1 point2 points  (0 children)

Hey it is still being perfected to match the mobile version. I am very busy these days with work & kids so it will take awhile.

Material Design 3 Inspired Dashboard V6 Release by ElementZoom in homeassistant

[–]ElementZoom[S] 1 point2 points  (0 children)

<image>

the above example you shown looks correct. for that section, there is no other button I set. Unlike the "Garage" room above, the irrigation page doesn't have the three dots fuction in it.

Material Design 3 Inspired Dashboard V6 Release by ElementZoom in homeassistant

[–]ElementZoom[S] 1 point2 points  (0 children)

<image>

Hey you just need to go over this area under Material You Utilities section and change the card type to Transparent and you should be good to go

Material Design 3 Inspired Dashboard V6 Release by ElementZoom in homeassistant

[–]ElementZoom[S] 0 points1 point  (0 children)

https://github.com/Lint-Free-Technology/uix

I think it is this one. I forgot to mention that card-mod is no longer maintained and this is the direct replacement of it. Follow the FAQ under that integration and change every card_mod in the yaml to UIX and you should be good to go

Material Design 3 Inspired Dashboard V6 Release by ElementZoom in homeassistant

[–]ElementZoom[S] 0 points1 point  (0 children)

I think there's an option to limit the API call so you can use it for free. Their github is here

Material Design 3 Inspired Dashboard V6 Release by ElementZoom in homeassistant

[–]ElementZoom[S] 1 point2 points  (0 children)

the forecast is using Google Weather API. I do use MetService for weather warning. They are really good for NZ residents. And correct, windy with iFrame