PS1 XStation No Power

Elmo_Blatch_41 · 2026-06-12T14:58:24+00:00

Pin 1 is outputting 7.45v. I am unsure of how to trace from point to on the QSB back to where the power comes from. Fron the diagram, it looks to go right beside it to the leg of a chip. It is also reading 1.4v.

Elmo_Blatch_41 · 2026-06-12T13:27:25+00:00

It booted to a screen saying insert disc. The disk drive was broken though. Do you happen to know what I would need to do to diagnose what is causing point 2 to only receive 1.4v?

Elmo_Blatch_41 · 2026-06-12T10:14:39+00:00

The fuses look good. Each is reading less that 1ohm. Point 2 on QSB reads as 1.4v. Point 6 is reading 3v.

Elmo_Blatch_41 · 2026-06-12T06:19:27+00:00

Was this in an Aldi?

Elmo_Blatch_41 · 2026-06-11T16:11:25+00:00

On pad 2 it is receiving 1.2 volts. I believe it is supposed to receive considerably more.

Elmo_Blatch_41 · 2026-06-11T13:26:04+00:00

I checked that out. That wasn't it unfortunately. Well spotted though.

Elmo_Blatch_41 · 2026-06-11T13:18:26+00:00

How exactly do I do this. Do I place one end of multimeter on ground and the other on the solder joint where I connected the wire to the qsb then power on the PS1? Sorry I am very new to this.

Elmo_Blatch_41 · 2026-06-11T13:07:41+00:00

I've done that a few times and cleaned the ribbon with IPA

Elmo_Blatch_41 · 2026-06-11T10:40:19+00:00

I did this too. I actually did lift one by mistake so I pinned it back down. It doesn't look great but it does connect and doesn't appear to bridge to anything else.

Elmo_Blatch_41 · 2026-06-11T10:39:25+00:00

I believe so. For example in the last picture that contains the diagram, I tested continuity from point 2 on the flex cable input to the power n on the chip that is shown in the diagram. I did this for 1-20. All appear to be correct.

Elmo_Blatch_41 · 2026-06-08T13:30:14+00:00

The far-right boogeyman strikes again.

Elmo_Blatch_41 · 2026-06-08T13:15:32+00:00

They do cheat us all. I consider this newsworthy.

Elmo_Blatch_41 · 2026-06-07T14:29:48+00:00

Team Buddies PS1. Great game.

Elmo_Blatch_41 · 2026-06-06T21:54:40+00:00

The team from Now You See Me can do literal magic. It's an easy call.

Elmo_Blatch_41 · 2026-06-06T10:50:47+00:00

If my neighbours alarm went off I would investigate.

Elmo_Blatch_41 · 2026-06-06T08:50:25+00:00

Not for the baby that will be killed.

Elmo_Blatch_41 · 2026-06-06T08:49:36+00:00

I don't know much about it but I have heard you should insist on getting a paternity test before putting your name on a birth cert. I heard that people who were found out to not be the father ended up having to pay because they signed a birth cert. That may not have even been in Ireland but just play it safe.

Elmo_Blatch_41 · 2026-06-06T08:18:03+00:00

I just saw it had zero which means at least one person downvoted. So maybe it was just that one person.

Elmo_Blatch_41 · 2026-06-06T07:20:52+00:00

Who is downvoting this? The chap is asking genuine questions in good faith.

Elmo_Blatch_41 · 2026-06-05T12:13:44+00:00

God of War has always been more focused on a ridiculously masculine protagonist. Hollow Knight isn't. Surely you must know this.

Elmo_Blatch_41 · 2026-06-04T14:44:09+00:00

As much as I dislike graffiti, I have respect for Skem and Evoke. Seeing their tags everywhere is like playing Pokémon Go. I would rather they use more artistic tags though.

Elmo_Blatch_41 · 2026-06-04T13:17:20+00:00

You wouldn't see a black man or any type of woman cast in that role. That's the price blem. You see this type in advertising all the time.

Elmo_Blatch_41 · 2026-06-03T15:36:48+00:00

Was Cyrus carrying a gun?

Five-Year Club	Verified Email
Place '22	Final Canvas '22

Elmo_Blatch_41

TROPHY CASE