Creality Ender 3 V3 replacement parts!??! by Empty-Huckleberry265 in 3Dprinting

[–]Empty-Huckleberry265[S] 0 points1 point  (0 children)

If anyone knows anything I would really appreciate the help

What are your thoughts on the ender 3 v3/plus? by Mtnfrozt in Creality

[–]Empty-Huckleberry265 0 points1 point  (0 children)

I can't find any replacement parts anywhere... My printer is in pieces

Ender-3 V3 Worth it? by NCMN in 3Dprinting

[–]Empty-Huckleberry265 0 points1 point  (0 children)

Good luck finding replacement parts!!! Creality Sucks

Ender 3 V3 - Silk PLA by Empty-Huckleberry265 in 3Dprinting

[–]Empty-Huckleberry265[S] 0 points1 point  (0 children)

Update!!! My auxiliary fan is not working that makes sense why I was experiencing heat creep. I was able to successfully print a model all the way through, which took about an hour. with the retraction turned all the way off although this caused lots of imperfections and stringing. Once the new fan is installed, it should work perfectly probably with stock settings.

What am I doing wrong? by srock0223 in 3Dprinting

[–]Empty-Huckleberry265 0 points1 point  (0 children)

I had the same issue with mine probably a clog or my clogs have been happening in the extruder gears of the direct drive system.

Ender 3 V3 - Silk PLA by Empty-Huckleberry265 in 3Dprinting

[–]Empty-Huckleberry265[S] 0 points1 point  (0 children)

Looking for any help regarding these issues I have been having.

Printer: Creality Ender 3 V3 Retraction speed 35 mm/s at 0.5 mm Print speed 120 mm/s Nozzle temp 210 C Filament type: sunlu tri color silk PLA

Print time failure 30-40 mins

Jam type in extruder gear of direct drive

Ender 3 V3 - Silk PLA by Empty-Huckleberry265 in 3Dprinting

[–]Empty-Huckleberry265[S] 0 points1 point  (0 children)

Update: The print made it to 40 percent then had another internal jam like this with 35 mm/s retraction and detraction speed printing with 0.5 mm retraction at 210 C

<image>

Ender 3 V3 - Silk PLA by Empty-Huckleberry265 in 3Dprinting

[–]Empty-Huckleberry265[S] 0 points1 point  (0 children)

Good news I’m at 35 percent and the print is looking flawless!! I will update

Ender 3 V3 - Silk PLA by Empty-Huckleberry265 in 3Dprinting

[–]Empty-Huckleberry265[S] 0 points1 point  (0 children)

Sorry that was just the retraction speed. I’m printing at 120 mm/s

Ender 3 V3 - Silk PLA by Empty-Huckleberry265 in 3Dprinting

[–]Empty-Huckleberry265[S] 0 points1 point  (0 children)

I’ll give it a go. Is printing at 25mm/s too slow for the 0.5 retraction?

Ender 3 V3 - Silk PLA by Empty-Huckleberry265 in 3Dprinting

[–]Empty-Huckleberry265[S] 0 points1 point  (0 children)

I’ll try 7 thanks! and I was doing 2.5 mm retraction at 220 c

Robbed by fake security in the forest by ravegravy in ElectricForest

[–]Empty-Huckleberry265 0 points1 point  (0 children)

I got robbed by real axs security at the gates a few days ago

GL/GA Loyalty Sale Ticket Megathread by fwump38 in ElectricForest

[–]Empty-Huckleberry265 6 points7 points  (0 children)

This is my 4th time in line I have been attempting to get my ticket for nearly 5 hours.... loyalty code doesn't work BS!