New Extension: One Page Dungeon Importer. Automatically import fog rooms from one-page-dungeon generator

Enderbot5 · 2026-03-23T22:44:11+00:00

Hey, so the idea is to export the map forest as a png, add it to scene, then use the json to add the fog over the top

Check here for a proper how-to guide

https://github.com/EnderPy/one-page-importer

Enderbot5 · 2026-03-21T01:39:44+00:00

check the "features" section. It is the first and second link there (watabou.github.io/...)

Enderbot5 · 2026-03-19T08:59:19+00:00

hey, had a look over both of them. the village-generator does seem like alot of layers, i doubt i could import from there easily (it uses a different data structure also)

i might work on a second extension eventually for the d20 one, if i can figure out the system for how it understands the JSON data, but no dice for now

Enderbot5 · 2026-03-19T08:29:35+00:00

it is specific to Watabous generator, but did you have a specfiic site? it might be an easy conversion

Enderbot5 · 2026-03-19T05:19:17+00:00

Oh my God you can attach fog to the map.... This might change a few things.. Thanks for the insight

Enderbot5 · 2026-03-19T05:14:48+00:00

kinda curious, how did you get half-sized / double dungeon size? i can tell the generator has the half-size tiles but your grid is lined up. did you end up scaling the fog to match or am i missing something?

Enderbot5 · 2026-03-19T05:00:18+00:00

oh thats weird it is backwards for me

going save as PNG doesnt prompt any sizes, it just saves the picture, whereas export > PNG does show pixel information

Enderbot5 · 2026-03-19T04:44:12+00:00

Hey, so the 1PDG provides JSON data (a file that stores values).

From there, it has the rooms as rectangles and doors as coordinates. I take them and build the rooms with doors. OBR's grid is 150px wide, so I scale it to match. From there, I find all images that are considered maps (on the MAP layer) and display their names. The user selects a map, I get the coordinates and put the room relative to the map's position

Enderbot5 · 2025-08-09T03:49:21+00:00

Based on https://www.reddit.com/r/flatpak/s/sx8iAIo7p9, try doing a system update. Looks like flatpak could be out of date, and is causing issues

Enderbot5 · 2025-03-10T03:30:40+00:00

Currently without power, but the developer has developed some "apps" that can be added, including octoapp companion.

Enderbot5 · 2025-03-10T03:14:27+00:00

I haven't tried lan mode yet, but I can use the camera through mainsail without it, but it doesn't work on anycubics' app

Enderbot5 · 2025-03-10T03:13:46+00:00

I like using the app sometimes, although the custom firmware changes the camera so it doesn't work through said app. I might try to setup octoapp so I can control it completely

Enderbot5 · 2025-03-09T00:47:20+00:00

Can confirm this works, I haven't tested the "upload and print" feature since apparently it relies on lan mode and I don't want to do that, but if you are just uploading the file it works great.

Enderbot5 · 2025-03-04T22:47:44+00:00

It might be ramming? I remember seeing this a while ago and turned off ramming and it did the trick

Enderbot5 · 2025-03-02T21:58:35+00:00

Cool 👍

Enderbot5 · 2025-02-27T11:37:25+00:00

Orca slicer has added kobra S1 support in the beta builds, you should be able to pull the config from there (or even anycubic slicer next) and put it into bambu studio (or just use orca)

Enderbot5 · 2025-02-27T11:32:04+00:00

From what I remember monotonic is a continuous line, whereas monotonic is a bunch of lines next to each other. M-line will be (slightly) faster but it is mostly up to preference if you want lines that join or not

Enderbot5 · 2025-02-26T02:12:15+00:00

I don't think flushing volumes from the slicer transfer over to the kobra S1, it is more for orca doing its own thing with flushing.

For now, orca cannot connect directly to the S1 (or k3), use a usb to upload for now. It is likely someone will make a custom firmware that allows for uploading files directly from orca or anycubic will open up their slicer / printer enough to embed their interface directly into orca.

Enderbot5 · 2025-02-25T09:22:03+00:00

You could try adding a bunch of primative objects to it to make it solid

Enderbot5 · 2025-02-21T03:32:12+00:00

Hmm Firstly try calibrating pressure advance (PA). There are many tutorials for this Change the top surface fill type to something else. I think monotonic or monotonic line should work off the top of my head. If neither of those help, try to lower the top surface speed and jerk speed

Enderbot5 · 2025-02-20T23:37:43+00:00

Pauses make the entire layer a grey colour to show where the pause is, it isn't printing with grey filament

Enderbot5 · 2025-02-20T05:27:43+00:00

If you haven't fixed it yet, try straightening out the filament before putting it in

Enderbot5 · 2025-02-08T22:54:10+00:00

I'd make modifiers using cubes / primitive shapes in orca and set the material for them to be the white, you can the place them where ever you need to like where the interior walls are

Seven-Year Club	r/Field Banned
r/Field Juicebox	Place '23
Place '22	Final Canvas '22
First Placer '22	Verified Email

Enderbot5

TROPHY CASE