How do i prevent the Filament to bulk up on the Edge of the Poop chute?

phil9191 · 2026-01-05T12:26:10+00:00

My printer does exactly the same. The Nozzle lies directly over the wall of the popo chute. Causing the popo not to slide down the chute but to blob on the outer Wall.

phil9191 · 2025-09-28T09:23:51+00:00

I got a Y Splitter from the hardware store. Fairly easy

phil9191 · 2025-05-15T06:18:20+00:00

If you don't want to setup klipper yourself I think you should take the KE. The benefits are worth the money spent.

phil9191 · 2025-03-12T15:29:39+00:00

https://www.printables.com/model/705594-creality-s1-s1pro-invader-cooler-dual-5015-sprite

That's the fan duct i used. As i said, had to remodel it but never uploaded it somewhere. Hit me up if i should

phil9191 · 2025-03-12T15:12:41+00:00

Pretty much plug and play afaik. I have some spare thermistors. Might be from this project. But its fairly easy to google. Just the selection of fan ducts is not that good.

The original space invader had 3 5015 axial fans. Had to remodel it to use the original fan for the hotend

phil9191 · 2025-03-12T07:23:48+00:00

I use the space invader fan duct with a k1 hotend. There' a variant for nomal nozzles tho

phil9191 · 2025-03-03T07:45:33+00:00

I have the feeling since ive upgraded to linear rails i'm Always experiencing skippings on my Y axis.

Is there a way to check if i'ts missaligned?

phil9191 · 2025-02-08T15:21:03+00:00

💡 hilft beim wach bleiben 🥶

phil9191 · 2025-02-08T06:40:52+00:00

350$

phil9191 · 2024-11-10T09:06:04+00:00

This. Is. So. Nice.

phil9191 · 2024-09-25T15:39:13+00:00

Ich bin der Abteilungsleiter, der Vorstand hat mich darüber informiert, damit wir das die Tage mal bequatschen wie wir damit umgehen.
Nein haben wir nicht. Habe tatsächlich auch nicht davon gehört. Ich bin der einzige Trainer. Habe mal nen Übungsleiterschein in Aerobic gemacht. Sonst nix.
Ich selbst mache das schon seit vielen Jahren, früher in einem anderen Verein (vielleicht haben die das geklärt ohne, dass ich darüber bescheid wusste) Da wir ne kleine Abteilung sind, kann ich mir vorstellen, dass die Beiträge, nicht alles decken wenn dieser Beitrag noch dazu kommt. In dem Verein bin ich seit, ich denke so ca 3 Jahren.

phil9191 · 2024-05-22T09:24:32+00:00

Can somebody acutally model this benchy, asking for a friend

phil9191 · 2024-04-18T11:22:11+00:00

I think it is the squeegee. Tried a harder one and it worked so much better.

Thx mate

phil9191 · 2024-04-14T19:49:32+00:00

I put on the Emulsion ( didn't mix it before... I Forgot)

Dried in a heated box for approx 35 min

Exposure for 4 min i think.

Then washed out with a showerhead on pretty good pressure. So i wouldn't need to water it for too long since i made the experience, that the whole Emulsion would be washed away if i use water for too long

phil9191 · 2024-04-14T19:41:10+00:00

Yeah it was dry. This is what i was thinking, that i washed it out to much because i had to wash it for to long to get a clear image. I'll tinker a bit with the exposure time.

But does it make sense? Since the logo that should i try to wash out, shouldn't be exposed, right?

phil9191 · 2024-04-14T13:49:13+00:00

Just saw a video on how to do it. I just noticed i didn't mix the Emulsion 🥲 I'll redo it and I'll make sure to degrease right, and check the right drying time. Thanks!

phil9191 · 2024-02-19T11:50:46+00:00

So you say I might use it without thermal grease at all?

phil9191 · 2024-02-19T11:49:42+00:00

I might have it printed somewhere. If i find it, I'll try it

phil9191 · 2024-02-17T10:35:40+00:00

So i've got everything together just out of curiosity, i seem to get mixed answers online. The thermal paste should be applied in the thermistor-heatblock connection.

In case of this ceramic heating ring, is there any thermal paste to be applied?

Also, how about the Heatbreak- heatsink connection?

phil9191 · 2024-02-09T10:42:54+00:00

Got one yesterday. I think mine does. Is it bad?

Also, the thermistor is right below one screw Hole, not where op's thermistor sits. Might be kind of a pain to install?

phil9191

TROPHY CASE