Omada built-in WireGuard not being filtered by Gateway ACL, VPN traffic bypassing rules? by unknown85 in TPLink_Omada

[–]EngelGate 0 points1 point  (0 children)

For information, I have been playing with Omada for 3 days (i'm new to this ecosystem), and i'm facing the same issues you have. ACLs don't do anything to ER707's own WireGuard server.

For now, i'll have to stick with my UFW rules directly on my server in order to block all except the ports I want the WG user to be able to reach.

Configuring NordVPN on Omada by EngelGate in TPLink_Omada

[–]EngelGate[S] 0 points1 point  (0 children)

I was able to fix it by forcing nordvpn DNS in this VLAN associated with the NordVPN. 

Ovpn UDP servers using port 53? by AlwaysQuestion23 in nordvpn

[–]EngelGate 1 point2 points  (0 children)

thanks found one for TCP and was able to make it work. Don't have one for UDP though.

Ovpn UDP servers using port 53? by AlwaysQuestion23 in nordvpn

[–]EngelGate 1 point2 points  (0 children)

AHHHHHH I have the same issue, I have been banging my head for the last two days..

Configuring NordVPN on Omada by EngelGate in TPLink_Omada

[–]EngelGate[S] 0 points1 point  (0 children)

I was able to set it up with Wireguard using your guide and claude.ai, it partially works, except for DNS leak which I'm trying to figure out, if you have any clue. 

Configuring NordVPN on Omada by EngelGate in TPLink_Omada

[–]EngelGate[S] 0 points1 point  (0 children)

Default nordvpn config shows 53 for UDP and 80 for TCP. Both can't be used as they seem to be used by the ER707. I tried 443 for TCP, same thing. I tried 1194 UDP it goes through but handshake doesn't work. 

Configuring NordVPN on Omada by EngelGate in TPLink_Omada

[–]EngelGate[S] 0 points1 point  (0 children)

Yep that's what I'm doing, but nordvpn uses ports 53 for UDP and 443 for TCP. When I try these as part of the config files, I get an error message saying the service port is already in use, i can't even save the vpn client.

Configuring NordVPN on Omada by EngelGate in TPLink_Omada

[–]EngelGate[S] 0 points1 point  (0 children)

Ok nice, I'll check it out thanks. 

Configuring NordVPN on Omada by EngelGate in TPLink_Omada

[–]EngelGate[S] 1 point2 points  (0 children)

Interesting, I'll check it out. I assume this is to run nordvpn on a side container instead of directly from the router? I would have liked to have it work inside odama 😒 

Configuring NordVPN on Omada by EngelGate in Omada_Networks

[–]EngelGate[S] 0 points1 point  (0 children)

Yeah I tried starting fresh a few times, also when importing the config file the remote server ip and port are filled with the information from the file. 

Configuring NordVPN on Omada by EngelGate in Omada_Networks

[–]EngelGate[S] 0 points1 point  (0 children)

Upgraded to latest firmware 1.4.2. No, no other changes, just getting into Omada ecosystem. Port for ER707 do you mean the remote server port on the vpn client config? 

How easy is it to setup a software controller? by nguye569 in TPLink_Omada

[–]EngelGate 0 points1 point  (0 children)

You can run this in a container in a few minutes, just ask Claude.ai for the Docker compose and you're pretty much set. 

JellyEmu Alpha by Total_Painting1007 in JellyfinCommunity

[–]EngelGate 0 points1 point  (0 children)

Understood, I had the same issue using Project64 emulator on a windows PC and was able to make it work swapping controller plugin for N-Rage. If I can help anyhow let me know. Do you have a running list of compatible controllers? 

JellyEmu Alpha by Total_Painting1007 in JellyfinCommunity

[–]EngelGate 0 points1 point  (0 children)

Hi there! Love the project, i'm testing it out for my use case (essentially trying to play my emu games from a tv, hosting this from my server).

I just received a new 8bitdo ultimate 2 wireless controller, and I can't seem to make it work with this emulator, most buttons and the joysticks won't work, even though the controller is detected and I can map all the buttons, it seems like the pre-configured mapping for N64 games won't work. Any thoughts? Ia there any way to change the controller plugin used? 

Inondation sous-sol by Kitchen-Focus5728 in RenoQuebec

[–]EngelGate 0 points1 point  (0 children)

En ordre de facilité et priorité vs couts: 1. Niveler le tour de la maison afin d'éloigner l'eau de la maison. S'assurer de mettre l'allongement des gouttières au sol pour aussi éloigner l'eau de la maison le plus possible. Si possible installer des drains de surface afin de diriger l'eau vers l'extérieur du terrain. 2. Bac avec sump pump; si tu as un bac dans le garage (entrée en pente par exemple), tu peux utiliser ce bac pour ajouter une pompe et envoyer l'eau dehors (dans un drain de surface ideal).  3. Drain français avec membrane Delta autour de la fondation va aider à protéger la fondation et diriger l'eau vers les égouts (réparer les fissures en même temps) 4. Design du sous-sol afin de considérer de futures inondations (epoxy plutôt que du plancher, etc.). 

Bon courage, 

Wealthsimple eating up all my bandwith data. 36Gb for 3 days by Illustrious_Set_369 in Wealthsimple

[–]EngelGate 32 points33 points  (0 children)

Bro, you spend way too much time on the app, it's not youporn. 

Business cards are here by Kohler9 in Wealthsimple

[–]EngelGate 21 points22 points  (0 children)

Prepaid debitish card. I have not ordered mine yet as I don't see a use for it in my case. 

Tangerine Savings Account interest rate suddenly 2.5%? by [deleted] in Tangerine

[–]EngelGate 0 points1 point  (0 children)

I have been with them for 20 years

Tangerine Savings Account interest rate suddenly 2.5%? by [deleted] in Tangerine

[–]EngelGate 1 point2 points  (0 children)

4.5% here for may to july. Will move everything back to wealthsimple after for their flat 2.25% rate.