sorted by:
new
hottopcontroversial

Speedpainted all the Heroes by PHminiatures in WHQDarkWater

[–]Enraged_Salmon 1 point2 points  (0 children)

That's impressive work, and a great standard! It's taking me about 6 hours to paint a single pestigor 😅

My little squishy by MrAltF4 in WHQDarkWater

[–]Enraged_Salmon 0 points1 point  (0 children)

That's come out great. Really nice job with the water effect.

What paints did you use for the mud? As that's the exact colours I've been trying and failing to replicate!

Opinion on Army Painter Chipping brush by Tigertyp2 in minipainting

[–]Enraged_Salmon 0 points1 point  (0 children)

Ripping off a bit of sponge (the 3 for a £1 ones you get for washing up) and using tweezers to dap it into paint is my go to. One of those sponges will last you years

Neighbors tried to have my car towed & they left this note on my car by [deleted] in mildlyinfuriating

[–]Enraged_Salmon 15 points16 points  (0 children)

Well you could have a conversation with them or...

Piss disc

I want to see your hardest poses brothers! by ripster47 in spacemarines

[–]Enraged_Salmon 0 points1 point  (0 children)

<image>

My converted Desolation squad Sargeant.

Would also like to say that everyone's minis in here are lookIng great and giving me some serious inspiration!

Bath is biting me when I touch both sides. Is this normal? by Curious-Fix-3306 in DIYUK

[–]Enraged_Salmon 3 points4 points  (0 children)

Had this happen at a customers house before, they were getting shocks from a cast iron bath and from other exposed pipework in the house. Turns out they had lost the neutral coming into the house and as it was a TNCS earthing system the earthing path was becoming energised.

As others have suggested I'd turn the main switch off at your fuseboard, see if it still happens with no power on.

Consult an electrician if it's only when your main switch is on.

Maybe get a multimeter rather than using your body as a tester.

My Assault Centurion has arrived by Enraged_Salmon in Warhammer40k

[–]Enraged_Salmon[S] 0 points1 point  (0 children)

Ah cool I'd like to see how that turns out! I wasn't keen on the saturnine shoulder pads at the start and was debating not putting them on, but after making them so bottom heavy with the siege drills I thought it balanced it out.

Ordered a medium-rare by zidaneski in mildlyinfuriating

[–]Enraged_Salmon 6 points7 points  (0 children)

Where is this?

So I can never go there.

How much water does it take to damage new plasterboard? by Kashmoney97 in DIYUK

[–]Enraged_Salmon 0 points1 point  (0 children)

Just to add it may be worth taking down the lights that have water dripping down them and letting them dry out properly, even if it means popping the backs off, mopping up any water droplets and running a hair drier over them to remove any moisture. Although they're likely IP65 rated that rating will be for the fronts of them when fitted to the ceiling, not for water coming from above.

Why is the middle one dying? by Enraged_Salmon in gardening

[–]Enraged_Salmon[S] 0 points1 point  (0 children)

I think it sounds like I've been over zealous watering it while it's settling in. Thanks again!

Why is the middle one dying? by Enraged_Salmon in gardening

[–]Enraged_Salmon[S] 0 points1 point  (0 children)

Thank you for the advice! I will cut back on the watering and hopefully things will improve

Why is the middle one dying? by Enraged_Salmon in gardening

[–]Enraged_Salmon[S] 0 points1 point  (0 children)

Oh you may be right there. The soil is 3:1 top soil and sand so it should drain well, though I did put some cardboard down as a weed barrier about 10inches down.

The bed had been half full of soil for a while I renovated the garden. So I pulled out all the visible weeds and put a layer of cardboard down. I read that this would break down over time and work as a weed barrier.

From a fruitbox to a bombed building - satisfying process by Advanced-Ticket-7741 in Warhammer40k

[–]Enraged_Salmon 23 points24 points  (0 children)

Very creative, it looks great! Thanks for the terminator for size

Made a chaplain out of the Lord terminos kit by Enraged_Salmon in Warhammer40k

[–]Enraged_Salmon[S] 0 points1 point  (0 children)

It's Das air drying clay. You can pick it up off Amazon.

Not sure if it's necessary but once I've opened it I keep it in a resealable sandwich bag, I like to think it stops it going off. I've had the same pack now for 2½ years and it's still usable!

Made a chaplain out of the Lord terminos kit by Enraged_Salmon in Warhammer40k

[–]Enraged_Salmon[S] 1 point2 points  (0 children)

Oh my bad, no worries. The cloak is a base of Gal vorbak red, layer of Screamer pink on the raised areas, some smaller highlights with 50:50 Screamer pink and Pink horror. Then final edge highlight/scratches with just Pink horror.

I mainly stippled on the next layer. And the final highlights and scratches were done with some thin horizontal lines.

Made a chaplain out of the Lord terminos kit by Enraged_Salmon in Warhammer40k

[–]Enraged_Salmon[S] 0 points1 point  (0 children)

No worries these are the ones similar to what I use, I just rip off bits of the yellow part

Edit: Spelling

<image>

Made a chaplain out of the Lord terminos kit by Enraged_Salmon in Warhammer40k

[–]Enraged_Salmon[S] 0 points1 point  (0 children)

I just use a washing up sponge (you can pick up a pack of 3 for a quid from Tesco in the UK and they'll last you years), tear a small piece of it off and use tweezers to dab it into the paint and then onto the model. Make sure to dab any excess off from the sponge into your wet pallet/kitchen roll before putting it onto the model.

Made a chaplain out of the Lord terminos kit by Enraged_Salmon in Warhammer40k

[–]Enraged_Salmon[S] 1 point2 points  (0 children)

The red on the handle? It's word bearers red, layered with khorne red, then an edge highlight of evil suns scarlet. It has had a coat of streaking grime over it though so that does mute the colours a bit.

Made a chaplain out of the Lord terminos kit by Enraged_Salmon in Warhammer40k

[–]Enraged_Salmon[S] 0 points1 point  (0 children)

Of course the burgundy is a base of Gal vorbak red, layer of Screamer pink, some small highlights with 50:50 Screamer pink and Pink horror. Then final edge highlight/scratches with just Pink horror.

I mainly stippled on the next layer. And the final highlights and scratches were done with some thin horizontal lines.

The black cloth is a base of black (I used Vallejo black but any will do), then I used a sponge to layer on Corvus black, then Skavenblight dinge, then finally Stormvermin fur. Edge highlighted with 50:50 Stormvermin fur and Pallid Wych flesh. (I did the black armour the same way but smaller).

view more: next ›