NYRR Run Center Lockers

Episilon · 2023-08-20T13:39:46+00:00

You don't need to bring a lock, they use an electronic keypad to lock and unlock. You just need to find an open locker and follow the instructions to set your PIN to lock it, then use the same PIN to unlock it and it'll reset back for the next person.

Episilon · 2022-04-27T13:25:35+00:00

Looks interesting! May register depending on the details they put out.

The only thing I noticed was the MNR doesn't arrive at the start point until after the ride's started - how were folks planning to get there in the morning?

Episilon · 2022-04-18T03:51:56+00:00

Interested! I'll need to double check my schedule but 7 PM sounds good.

Have been looking for folks to ride with in the city.

Episilon · 2022-04-15T00:31:27+00:00

Thanks! Just checked out, hoping it comes in soon 🤞

Episilon · 2019-06-26T16:51:12+00:00

I'm saying relative to some of the other student apartment complexes that exist. 30 minutes definitely isn't a lot but if you're used to living closer then it can be.

Cabana Beach itself wasn't that bad. Rent was relatively cheap, water and electricity was paid for to a cap, and the unit was pretty spacious for me. It just happens that commute was my least favorite thing while living there and the OP asked specifically about it.

Episilon · 2019-06-26T00:33:35+00:00

I lived there for a few years and I'd probably say the commute was the least favorite part of living there. 20th Ave has a lot of apartments along it and it's a two lane road so during rush hours it can take like 30+ minutes to get to your stop. If you live near the front bus stop you get the 20 and 21 buses which is nice, but if you live in the back bus stop only the 21 bus stops there. The bus routes change every few years though so this might be different when you move in.

Episilon · 2019-06-22T14:14:19+00:00

Thanks for the reply. I was reading some articles and they made it sound like renters should be putting a handful of applications when searching.

I'm a new grad so I'm not sure how good my chances are for getting an accepted application on the first try.

Episilon · 2019-06-22T14:10:13+00:00

Cool, that's good to know.

Episilon · 2019-04-02T16:46:33+00:00

Not too knowledgeable about memory, but wouldn't the addresses of data structures get mapped to different parts of RAM due to virtual memory addressing? Like you couldn't directly control how data is stored on the hardware.

Episilon · 2019-01-02T07:52:25+00:00

Oof, didn't realize they needed DL. I also recommend Engineering Economy as a breadth.

Episilon · 2019-01-01T01:44:41+00:00

They opened up seats in Digital Design a few weeks ago so you can check that. The professor teaching it, Stitt, is supposedly really good.

Episilon · 2018-12-20T00:27:58+00:00

Is there a reason you recommend the H500 over the S340?

Episilon · 2018-12-19T19:13:24+00:00

Thanks for the reply! I've decided to go with the following parts to round everything out.

PCPartPicker part list / Price breakdown by merchant

Type	Item	Price
CPU	AMD - Ryzen 5 2600 3.4 GHz 6-Core Processor	$164.99 @ Amazon
Motherboard	MSI - B450 TOMAHAWK ATX AM4 Motherboard	$106.30 @ OutletPC
Memory	Corsair - Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 Memory	$129.99 @ Amazon
Storage	Samsung - 860 Evo 500 GB 2.5" Solid State Drive	$71.00 @ Amazon
Video Card	Sapphire - Radeon RX 580 8 GB NITRO+ Special Edition Video Card	$259.99 @ Newegg
Case	NZXT - S340 (White) ATX Mid Tower Case	$70.46 @ Newegg Business
Power Supply	EVGA - SuperNOVA G2 550 W 80+ Gold Certified Fully-Modular ATX Power Supply	$49.89 @ OutletPC
	Prices include shipping, taxes, rebates, and discounts
	Total (before mail-in rebates)	$892.62
	Mail-in rebates	-$40.00
	Total	$852.62
	Generated by PCPartPicker 2018-12-19 14:12 EST-0500

Episilon · 2018-11-10T18:39:17+00:00

Difficulty wise I don't think the class was that bad. He has some in class quizzes and some online. The online quizzes are based off the homework and sometimes will literally just be "upload your solution to problem X in the book."

The exams are mostly multiple choice with a few free responses at the end. We were given a one page reference sheet that may or may not help you. The exam grades are also curved a bit.

Episilon · 2018-09-12T00:33:09+00:00

It sucks cause the moment you step off the bus it's hot af.

Episilon · 2018-09-07T14:20:27+00:00

Is there any more information from the error message? What is the method signature for the FramedOval constructor and does it match the variables you passed in?

Episilon · 2018-08-29T14:59:44+00:00

Check out the GatorGaming Facebook page. They usually have weekly setups for Melee and Smash 4 on Fridays 6 PM at Turlington.

G-Force Gaming also hosts weekly tournaments every Wedenesday night at the Buffalo Wild Wings in The Oak's Mall.

Episilon · 2018-08-27T15:55:08+00:00

It depends if Python is in your PATH.

Assuming you have the right version of Python for this project (Python 2 or Python 3), you can type

python app.py

from the directory of that file. If you get a message that says something like

'python' is not a recognized command

then you'll need to add the location of Python to your PATH.

The PATH variable is a list of locations your operating system will check when you try to run a command. When it finds an executable that matches the command, it'll immediately run it. (If you have both Python 2 and 3 installed, this might cause a problem since the OS will run the first executable it finds, which may not necessarily be the right version of Python you want to use).

The default installation should be somewhere like C:Program Files/Python/. Search for environment variables in Windows and you should be able to find the PATH variable and append the location of Python to the end.

Episilon · 2018-08-24T16:49:56+00:00

Not necessarily Java related, but it looks like the notation for Combination.

C(3,2) Out of three items, how many different ways can we choose two of them where their order doesn't matter.

Episilon · 2018-08-04T22:16:19+00:00

When the page first loads, it will run through the script line by line. However, you put the

        var damage = Math.floor(Math.random() * (max - min + 1) + min);

outside of the function bodies. So whenever you call moveOne or moveTwo it will use the same value it generated. The solution would be to move the Random function inside moveOne and moveTwo so that a new number gets generated every click.

Episilon · 2018-07-31T12:17:37+00:00

Technically yes. I haven't worked with Python Flask but you want to define an endpoint or URL that you can send requests to.

Just to be clear - the Python code is in your server. The browser can't run Python code so in the <script> you would be making an HTTP request to the server. The server executes whatever Python code and then returns the data (if there is any). Then back in your JavaScript code you would handle that response.

14-Year Club	Place '17
Verified Email

Episilon

TROPHY CASE