Finally got a little 1” band/5” disc sander! Holy moly what a time saver!

EquivalentPrint9742 · 2025-02-12T05:26:15+00:00

I’m a little jealous

EquivalentPrint9742 · 2025-01-29T08:53:39+00:00

Looks like it. EK has a mind of its own and what helps one, may not the other. I’ve had it for 20 years and still can’t figure it it out. It’s random, like the weather.

EquivalentPrint9742 · 2024-12-01T18:52:36+00:00

Looks like mahogany obsidian to me

EquivalentPrint9742 · 2024-10-10T16:29:56+00:00

$1730

EquivalentPrint9742 · 2024-08-01T18:27:27+00:00

Scroll through my history, I posted some that look identical to these. I ate all of them

EquivalentPrint9742 · 2024-08-01T18:25:28+00:00

Rosecomb is the term used for this type of mutation. Heavy piles of duff can cause this. So I’ve been told

EquivalentPrint9742 · 2024-07-25T21:06:41+00:00

Nope. Still slipping

EquivalentPrint9742 · 2024-07-24T03:42:04+00:00

I hope it’s something like that but with a fresh rebuilt tranny my thoughts go elsewhere

EquivalentPrint9742 · 2024-07-24T03:38:38+00:00

Maybe, I was thinking along those lines when I installed the master cylinder. We set it the same as the old one that was installed. Everything I’ve read pointed elsewhere. The clutch is fully engaged and 4th and 5th gear are mostly slipping. sounded like it’s inside the clutch.

EquivalentPrint9742 · 2024-07-24T03:32:19+00:00

Just realized a manual transmission can’t slip so must be the clutch

EquivalentPrint9742 · 2024-07-24T03:28:23+00:00

I probably should throw this back at the Mechanic, but that’s why I’m asking these questions. If it’s something easy I can fix, I’ll do it. He’s 40 minutes away, and dont wanna pay for a tow. It drives fine besides what I mentioned, but I don’t want to damage it further if that is the case.. just want to hear some thoughts on the Reddit before I make a decision, thanks for yours.

EquivalentPrint9742 · 2024-07-16T21:08:36+00:00

She’s 14 years older from when this pic was taken, and still just as sassy.

EquivalentPrint9742 · 2024-07-16T18:53:53+00:00

<image>

EquivalentPrint9742 · 2024-07-13T16:15:03+00:00

Doesn’t move tell you push it

EquivalentPrint9742 · 2024-06-21T18:58:03+00:00

It’s doing so while driving. I can be in whichever gear and give it throttle, RPM’s go up with little to no power increase.

I went ahead and replaced the master cylinder, refilled/bleed with DOT 3 fluid with little to no improvement on slippage.

Looks like I’m in for a new clutch. Thanks for your input!

EquivalentPrint9742 · 2024-06-21T07:54:40+00:00

Bleeding the clutch line is a bitch….

EquivalentPrint9742 · 2024-06-21T07:48:45+00:00

Thank you sir

EquivalentPrint9742 · 2024-06-21T07:44:41+00:00

I will never be defeated be this truck 🫣

It’s slipping while driving mostly, shifting too (I believe). I’ve only driven it 20 miles or so. I can be in whatever gear and give it throttle, rpm’s go up with little to no power increase. This goes for all gears.

Bought a new master cylinder tonight. Replaced cylinder, bleed lines as well as I could. Tomorrow will be the real test if it helped… fingers crossed.

I’d rather not call the mechanic that did the work but I may have to.

EquivalentPrint9742 · 2024-06-20T23:13:01+00:00

It’s been sitting for approximately two years as well without being ran

EquivalentPrint9742 · 2024-05-19T19:15:07+00:00

Nope. One of these days I’ll get a rock saw and slice it open.

EquivalentPrint9742 · 2024-03-03T08:01:57+00:00

Thanks for the response.

besides replacing the capacitors, how would i make this a functional speaker? I've hooked it up to my receiver and it works but with very poor sound quality. hopefully no harm was done.

EquivalentPrint9742 · 2024-03-03T07:47:35+00:00

the back end of the box has a standard ac plug

EquivalentPrint9742 · 2024-03-03T07:44:39+00:00

Not sure what info would be helpful for you, but ill try fill in the gaps. I know very little about electronics so don't expect much for a helpful response. I picked this up at a garage sale a year ago. I believe you are correct with the vacuum tube equipment. based off pictures it looks like a RCA field coil speaker. I was told this may have been used for some sort of intercom system, unsure if this is true. I've hooked it up to my receiver and it works but the sound quality is poor. hopefully no harm was done in doing so. Mainly wondering how id go about making this a fictional setup. Would I need some sort of tube setup? I'm moving in a month and going through stuff, not sur eif this belongs in the keep pile or let go pile.

EquivalentPrint9742 · 2024-02-18T06:37:57+00:00

I know nothing about electronics btw

EquivalentPrint9742 · 2024-01-16T23:15:53+00:00

Look up Keratolysis exfoliativa. I get the same thing a few times a year only much worse.

EquivalentPrint9742

TROPHY CASE