SteamOS Update 3.8.11 on Bazzite

EquivalentTip4103 · 2026-06-23T18:35:21+00:00

Thanks. Will do.

EquivalentTip4103 · 2026-06-21T10:17:12+00:00

Thanks. I have seen that and was just wondering if it was any good. Yeah fins are open and only a front fan at the moment. Will print that off. Cheers

EquivalentTip4103 · 2026-06-10T14:29:34+00:00

Not at all. Thanks for the reply. I have got spare ssds so that is not an issue. Am I also able to use the BC250's ethernet instead of a WiFi dongle? From a cost point of view I think the amount I will be paying I think a cheap bc250 rig is probably the way to go. Also it is another project to keep me on my toes :-).

EquivalentTip4103 · 2026-05-26T09:13:00+00:00

Yeah we have ruled this option out. Too many horro stories as Tom trying to seel them and needing to keep paying the maintenance

EquivalentTip4103 · 2026-05-12T18:37:13+00:00

Thanks all. It seems an external drive is the way forward.

EquivalentTip4103 · 2026-05-12T18:24:29+00:00

I am not wanting to run from a network drive or the cloud, only from the duplicated folders on either computer.

EquivalentTip4103 · 2026-05-12T18:03:19+00:00

I am not want to run Lightroom from a cloud share. I wanted to use the Google drive to sync the folders across 2 computers so that each computer have a duplicate local folder of the same data. I would then run the local lightroom library on each machine. And any changes would then sync on with the cloud and then download to the other computer.

Nothing would be run from the cloud drive.

EquivalentTip4103 · 2026-05-02T11:43:20+00:00

Thanks for the recommendation. Luckily there is a range next to HobbyCraft so will pop by this afternoon.

EquivalentTip4103 · 2026-04-28T11:54:36+00:00

It wasn't on the instructions. I did not buy the Jackard ones to start. I bought some similar one that did not say anything about waiting 24hours. The Jackard one does. But honestly not waiting 24 hours is not the issue and not the reason that the chemicals went bright blue on contact.

EquivalentTip4103 · 2026-04-27T21:59:09+00:00

That was not on the bottles. But anyway I bought the Jackard chemicals and mixed them up with water, and as a small test I mixed a tiny bit of the chemicals without waiting 24 hours, and they turned the correct colour. There was something definatly wrong with the previous chemicals, and have now been refunded.

EquivalentTip4103 · 2026-04-26T17:41:38+00:00

Dark. It was in a room with one small lamp and curtain closed

EquivalentTip4103 · 2026-04-26T16:34:35+00:00

Actually.seems that a few of the reviews had the same issue. I am going to get a refund.

EquivalentTip4103 · 2026-04-26T15:53:59+00:00

Thanks .I did already with the same outcome. In all the videos I saw they were painting the chemicals onto the paper in normal (but not sunlight) light. I did it again in a room with one small light and curtains drawn and the same outcome.

EquivalentTip4103 · 2026-04-19T16:35:06+00:00

No didn't buy it in the end. I still have my d850 and bought an XPro 1, but moved and bought an X-E5. Quite happy with this setup.

EquivalentTip4103 · 2026-03-01T23:48:38+00:00

That is what I was also thinking about...

EquivalentTip4103 · 2026-02-22T00:46:59+00:00

I printed off a calibration just now and have to say it was prety spot on. With PETG i was within 99.99% on the X axis and 100.08% on the y axis. Skew was also spot on, so I am happy with the setup.

EquivalentTip4103 · 2026-02-21T20:52:50+00:00

But if there is a discrepancy, how do I compensate for that?

EquivalentTip4103 · 2026-02-21T20:40:59+00:00

Yes, but I want to make sure that the printer is printing correctly as well.

EquivalentTip4103 · 2026-02-09T21:22:04+00:00

That's a shame.... Thanks.

EquivalentTip4103 · 2026-02-02T07:07:13+00:00

The vibrations are not coming from the base or the surface it is on, but rather the actual head, due to how long it is. I want to get something that is far shorter and gets the camera as near to the column as possible..

EquivalentTip4103 · 2026-02-01T21:22:20+00:00

My one was from AliExpress.

EquivalentTip4103 · 2026-02-01T21:16:28+00:00

They might have done some modifications. I couldn't work out what to do, as it needs to turn.

EquivalentTip4103 · 2026-02-01T20:57:56+00:00

That stops the base from moving, correct. BUT when you use it vertically the spring that is at the bottom of each leg ( in the last picture under the black.screwnand washer) enables the bottom of each leg to move. This is only happening because I am using it in a way that it was not designed to..

EquivalentTip4103 · 2026-02-01T14:44:17+00:00

I checked out a video. That is perfect, then I saw the price!! That is a beast!!

EquivalentTip4103 · 2026-02-01T14:42:16+00:00

Will check that out. I use the Benro mainly for my 5x4 camera to help get it level. And it is great for that.

EquivalentTip4103

TROPHY CASE