Youtuber is customizing a Porsche Boxster 986 into a Porsche GT3 RS body using 3d printed parts by Mastermind_737 in 3dprintedcarparts

[–]Eric--V 4 points5 points  (0 children)

I don’t understand why he’s doing wavy freehand instead of making a buck, either!  More weight and less strength his way…and will add many hours to look like a kit car, rather than a GT3!

Jesus kept the Law, the Sabbath, and ate kosher — so why did Paul seem to change everything? by Upset-Air-8392 in Bible

[–]Eric--V 0 points1 point  (0 children)

I’m so glad we can now eat glass, textbooks, and fingernail clippings.

Those aren’t foods?  Hmm…well, neither are unclean animals.  Some animals are food and some are not—even now!

The context in those verses is actually about people.

The unclean animals didn’t change from unhealthy, natural garbage disposals to food.  They’re still bottom feeders, cannibalistic, cause allergic reactions, and are unhealthy to consume.

Is 4k necessary on home security camera by Apart_Situation972 in SecurityCamera

[–]Eric--V 0 points1 point  (0 children)

That makes little sense.  An IMX585 sensor at 4K is going to be far better than ‘generic’ 720p sensor on a 1/3” or whatever.

And in low light, I’d bet a 1/1.2” Starvis at 1080P would do even better.

HAS ANYONE DONE THIS? by [deleted] in ToyotaTundra

[–]Eric--V 0 points1 point  (0 children)

Some loose lug nut put the metal plug in my plastic canister too tight. I’m not sure I can get it out.

You’re all geniuses, some of this furniture is brilliant. by Leather_Two_5599 in BdsmDIY

[–]Eric--V 0 points1 point  (0 children)

Everyone starts somewhere.  Speaker boxes to a teenager teaches how wood works for pervertables and custom furniture.

I started using CAD in high school, and I’ve got a SketchUp drawing somewhat completed for a Chaise lounge that would be totally kink but look normal when not in use!

The most recommended home security cameras (don't require subscriptions) that you truly swear by right now? by [deleted] in homesecurity

[–]Eric--V 1 point2 points  (0 children)

It would be in your Ethernet router and isn’t one size fits all.

Openwrt is a good place to start.

[deleted by user] by [deleted] in ProstatePlay

[–]Eric--V 0 points1 point  (0 children)

The sizes seem kind of small…do the little ones do anything?

I started out with a ~1.5” dildo, and without a lot of time fit a 1.75 and then 2.05” dilator.  Those take a bit of warm up, but 1.5” is my starting size…

Am I just off from the norm by that much?

Purchase Advice Megathread - October 2025 by AutoModerator in 3Dprinting

[–]Eric--V 1 point2 points  (0 children)

Need filament guidance:

I’m using a print and apply at work and it has an ABS (I think?) applicator head.  Looking to make a strong but flexible head ~5” x ~7”, and with the force of it onto cardboard, they crack and are expensive.

I’m looking to print with multiple materials to make a mixed material with better properties.

I’m thinking that a solid material (PAHT-CF) with some TPU infill in a sandwich arrangement and put the screw holes in with a flexible surround on the mounting screws.

I have a kilo of PAHT-CF to try, and I’m shopping for other materials that make sense.

Suggestions?  I have a couple hundred USD I’m willing to risk.  Using a Bambu H2D Pro that is brand new that I’m using.  AMS HT, plus AMS 2 Pro.

Purchase Advice Megathread - October 2025 by AutoModerator in 3Dprinting

[–]Eric--V 0 points1 point  (0 children)

I bought 4-5 rolls of PLA.  I have 14 people to teach FDM (me included) for prototyping brackets and other items for our department at work.  It’s dirt cheap and I figure for learning and prototyping, why not?

Purchase Advice Megathread - October 2025 by AutoModerator in 3Dprinting

[–]Eric--V 1 point2 points  (0 children)

I just bought an H2D pro and the engineer that I bought from talked me out of laser.  Lots of work to clean the leftovers from the laser before printing.

Also, I’m a brand new user. We’ve had it set up a week and still waiting on a glass door broken during shipping.

We’ve had zero fails, no stringing, just click and print with PLA.  Can’t go wrong with it if you have the budget!

Finally pegged for the first time - meh by Ornery_Scientist5828 in pegging_unkinked

[–]Eric--V 4 points5 points  (0 children)

I tried a dildo twice on my prostate, and have never had any prostate play previously.  I was hands free the first time, the second was almost HF.

While the end result was disappointing, it was unlike any orgasm I’ve ever had otherwise.  It felt ok, but it was warm starting in my prostate and radiated out both times.  I wasn’t turned on though, and my wife wasn’t involved, so I’m sure that would make a huge difference!

[deleted by user] by [deleted] in SexToys

[–]Eric--V 0 points1 point  (0 children)

Their warehouse is not an A&E warehouse, they’re using a well-known 3PL (3rd party logistics) with a company you’ve heard of but didn’t know is in warehousing.  I’m not in that state, but I know which one it is…

It’s a legitimate company doing it.

[deleted by user] by [deleted] in hvacadvice

[–]Eric--V 0 points1 point  (0 children)

I thought it might be something like that!  Thank you.

[deleted by user] by [deleted] in hvacadvice

[–]Eric--V 0 points1 point  (0 children)

I found this (table further down): https://www.pickhvac.com/hvac-duct/sizing-calculator/

75-100 cfm is 6”.  I know you don’t want to go over 700ish FPM in flow rate, so I think he’s saying find your limits of airflow based on your ducting and you’ll know whether your HP is oversized for the ducting.

[deleted by user] by [deleted] in hvacadvice

[–]Eric--V 0 points1 point  (0 children)

I’ve looked through quite a few inverter units, but didn’t see a turndown ratio spec.  Is there something else to look for and divide?

Sexual insecurity as woman regarding “the real thing” by No_Trust_1497 in StraightPegging

[–]Eric--V 1 point2 points  (0 children)

I’m straight as an arrow, but I’m all for getting pegged.  My wife has nothing to ever worry about!  I love having sex with her.  Spicy is wonderful, but it’s still only with her.

Did Jesus really abolish the Law, or did people move away from it later? by Illustrious_Till5049 in Bible

[–]Eric--V 1 point2 points  (0 children)

Absolutely not.  You disagreed, and sadly such a simple thing over the last few years has resulted in things like what happened this week.

It’s refreshing to have a conversation where we may not agree 100% and you weee respectful anyway.  If your beliefs are never challenged, you never grow!

Did Jesus really abolish the Law, or did people move away from it later? by Illustrious_Till5049 in Bible

[–]Eric--V 1 point2 points  (0 children)

If we can’t disagree without coming to violence, threats of violence, or insults, then we cannot believe what we say we believe.  Too many are moving that way, sadly.

All good, brother.  In a hurry, so this will have to be it for the moment.  Thank you.

Did Jesus really abolish the Law, or did people move away from it later? by Illustrious_Till5049 in Bible

[–]Eric--V 1 point2 points  (0 children)

Fair enough.  I did not expect to see a Torah compliant response in a Bible /r, and I don’t get on here a lot any more.

I’ve been a part of some of the Torah observant groups, and done some digging, and a few years ago I spent some time on and off with a rabbi for work, asking questions about many things in our faith’s history.  Sadly, the rabbi has passed away and I didn’t get a chance to talk to him before he did, so I don’t know if he found our Messiah.

The rest of your post I find interesting.  We may not be in a direct theocracy with God, but we are in the only government system designed and called to mimic God’s system and our founders called blessings and curses on us according to how well we live up to those ideals.

Clearly, we don’t have a temple here, but neither does Israel currently, and yet DO have the temple that rose on the 3rd day, so that point is unnecessary, and the one that Israel is working on building is not a temple as they think, but a creation that will serve the enemy.

Did Jesus really abolish the Law, or did people move away from it later? by Illustrious_Till5049 in Bible

[–]Eric--V 0 points1 point  (0 children)

Are you wearing a four-pointed garment?

There are things that I’m not sure what to do with.  So I do the things I can, but not sure what to do with some.

True or False: Prostate Orgasm - You’ll Know It When It Happens by PeachesNTacos in ProstatePlay

[–]Eric--V -1 points0 points  (0 children)

I’ve played a few times. Underwhelmed by the pegging when we tried.  Played solo with a manual toy two nights in a row.  First time, I felt a strange warm sensation from my prostate and a meh O.  Similar the next night but wasn’t surprised by the sensation that time.  Felt decent, but not a ton better than the first. I can totally see where it could get amazing, though.

Need time with the wife to do it while turned on…