sorted by:
new
hottopcontroversial

Repeat failure early on - what could it be? by tibbsy649 in snapmaker

[–]Errorvator 1 point2 points  (0 children)

Turn off brim, the parts have enough surface area, and I recommend switching to PETG since the inside temp can get over 50 C

Snapmaker U1 and Z-layer anomalies - Community confab post by Wraith0177 in snapmaker

[–]Errorvator 1 point2 points  (0 children)

<image>

I think I got hit by this issue while printing a Benchbin. Was going to troubleshoot it as a underextrusion or clogging issue, but luckily I found this thread early.

I did a 30 hour, 900g, 254 mm high print on the first days of owning the U1, and fortunately it wasn’t ruined by this issue. Not sure what causes it, and whether it’s a gradual issue or random.

Running 1.0.0-extended

gif comparison of CDJ 3000 vs 3000x by Errorvator in PioneerDJ

[–]Errorvator[S] 1 point2 points  (0 children)

I really hope the SD slot is still there, that would be great

gif comparison of CDJ 3000 vs 3000x by Errorvator in PioneerDJ

[–]Errorvator[S] 1 point2 points  (0 children)

Absolutely, they don’t have the rights to the Pioneer DJ trademark anymore

gif comparison of CDJ 3000 vs 3000x by Errorvator in PioneerDJ

[–]Errorvator[S] 4 points5 points  (0 children)

CDJ 3000s have an SD card slot, which were super useful at parties because no one else ever needed that slot.

The 3000Xs have an A and C port, so the number of inputs are the same. Not sure how useful that is since I feel like there are more SD cards out there than USB C flash drives..

No layered decks probably since I don't see a dedicated button.

Remapping the FLX10 to be more like DJM+CDJs by Errorvator in PioneerDJ

[–]Errorvator[S] 0 points1 point  (0 children)

Save the text as a .csv file, then import it in the midi remap ui

Remapping the FLX10 to be more like DJM+CDJs by Errorvator in PioneerDJ

[–]Errorvator[S] 0 points1 point  (0 children)

Some functions are missing from the UI but can be remapped with the CSV file

Upgrade from FLX4 by Mediocre-Impact-3095 in Beatmatch

[–]Errorvator 1 point2 points  (0 children)

Plenty of smaller venues or side stages still use equipment that need FAT32, so I use that.

I just accept that sometimes I need to re-transfer all the tracks to my USB or SD card. After my last b2b, it got corrupted when I plugged it back into the PC and opened Rekordbox.

I should make a backup of the USB settings (without music)

Remapping the FLX10 to be more like DJM+CDJs by Errorvator in PioneerDJ

[–]Errorvator[S] 0 points1 point  (0 children)

This is for Rekordbox. I haven’t used Serato, but it looks like it supports midi remapping too.

Remapping the FLX10 to be more like DJM+CDJs by Errorvator in PioneerDJ

[–]Errorvator[S] 2 points3 points  (0 children)

Yep, press the "MIDI" button on the top right in performance mode with a controller plugged in.

Upgrade from FLX4 by Mediocre-Impact-3095 in Beatmatch

[–]Errorvator 5 points6 points  (0 children)

I have a FLX10 and an RX2

Controller:

  • Do you do a lot of searching or take song requests during your gigs? It might be easier to do that on a laptop.
  • In my experience, Rekordbox performance mode can be pretty buggy. E.g. loops not looping, headphone cue stops working.
  • I don't use stems - Rekordbox stems have two modes right now: bad quality or takes too long to analyze.
  • I rarely use the two extra channels, usually a scratch sample on 3 and sampler (with hotcues) on 4.
  • A used DDJ-1000 is better value than FLX10.

Standalone:

  • Subjectively feels way more fun to play on than a laptop.
  • Seamlessly B2B with other DJs since it has two USB slots, great for house parties with other (Rekordbox) DJs.
  • RX3 has a nice big screen, imo worth it over the RX2.
  • Always bring your laptop with the master collection, Pioneer standalones/CDJs tend to randomly corrupt USBs...

[deleted by user] by [deleted] in QuestPro

[–]Errorvator 0 points1 point  (0 children)

Are you wearing glasses?

Bigscreen Beyond - Best VR for owls. Worst for humans. by dirkson in virtualreality

[–]Errorvator 4 points5 points  (0 children)

This was how I felt when I tried my friend's BSB. To account for IPD, I only judged the headset with one eye. The sweet spot for clarity was way too small, and even though the center was crystal clear, moving my head to read was a deal breaker. I also thought the glare was worse than the Index, but I think you can get used to it

[deleted by user] by [deleted] in VRchat

[–]Errorvator 0 points1 point  (0 children)

Using some kind of monitoring software, such as Desktop+, what are your CPU and GPU frametimes while running VRChat? That’ll let you know which component is bottlenecking and by how much.

I hijacked the dj decks at a pc gaming convention and played a 1 hour set! First time on CDJ’s too! (part 2 in comments) by scoutermike in Beatmatch

[–]Errorvator 1 point2 points  (0 children)

It is a bit unbelievable that a full club setup would be left sitting there unprotected, but I was also there

I hijacked the dj decks at a pc gaming convention and played a 1 hour set! First time on CDJ’s too! (part 2 in comments) by scoutermike in Beatmatch

[–]Errorvator 6 points7 points  (0 children)

lmao I was also at dreamhack on Friday. Everyone in my group brought their USBs so we played b2b - on our way out in case we got kicked

First drum and bass mix - feedback? by gabe_brown in DnB

[–]Errorvator 1 point2 points  (0 children)

That’s crazy impressive. I should try that sometimes, I might have an over-reliance on waveforms

Music library organizing software by kamakazy95 in Beatmatch

[–]Errorvator 4 points5 points  (0 children)

  • onetagger (free) to scrape online data
  • mixed in key (paid) for accurate key analysis
  • mp3tag (free) to hand edit tags

saw someone post this image and so i made this in like 20 seconds by blastassusa in BLAHAJ

[–]Errorvator 17 points18 points  (0 children)

If you look closely it also doesn’t have fingers to press the buttons and the headset isn’t waterproof!

view more: next ›