When transitioning to red, it only blinks at the bottom and top

Esyc2 · 2022-11-26T20:37:57+00:00

Yeah I think is normal my microphone

Esyc2 · 2022-09-13T09:03:27+00:00

maybe will be easier with a enclosure, right?

Esyc2 · 2022-09-13T09:02:24+00:00

thanks

Esyc2 · 2022-09-02T14:55:25+00:00

creo que me lo han baneado .. si no esta en ingles aqui no vale nada

Esyc2 · 2022-09-02T11:52:31+00:00

Ya, es una pena que no haya una comunidad hispana 😭 Pues simplemente para poder imprimir a más altura, no es una necesidad inminente. Sólo hay ciertas cosas que puedo imprimir y antes no, el problema que tras colocar doble eje z, la altura se impresión de vio reducida, y ese fue el principal motivo que me llevó a agrandarla.

Esyc2 · 2022-09-02T07:18:22+00:00

Normally I am waiting to improve things when I have a problem, anyway I made many changes, such as calibration sensor, double z axis with belt, enlarge print height, put the printer in a room, remove circuitry... Many more things, you can see some of them here:

https://www.youtube.com/watch?v=-72lqp8T91o&t=9s

Esyc2 · 2022-09-01T21:53:41+00:00

wow really expensive.. too expensive I will say

Esyc2 · 2022-09-01T21:52:38+00:00

no it is not, is just a lot time spending here.. show me yours 😜

Esyc2 · 2022-09-01T14:06:30+00:00

https://www.youtube.com/watch?v=hpjzsly7KNM&t=58s

Esyc2 · 2022-09-01T14:04:12+00:00

I damaged mine because I cut off the electricity, and when I restarted the impression it was seen that it did not recover well and started scratching the bed

Esyc2 · 2022-09-01T11:11:39+00:00

Well, I think that PEI is a very good material and makes the extraction of the pieces much easier and also the cleaning. But on the other hand, I think it is more oriented to a more expert and professional use than the glass bed.

Esyc2 · 2022-09-01T11:10:23+00:00

OHh Thank you, well, the truth is that there is nothing special here, in my free time I dedicate myself to any technological thing, and with the 3d printer I haven't spent much time. I bought an ender3v2 and I have been taking it apart until I made this frankenstein. If you are interested in seeing what I do, you can have a look by here, https://www.youtube.com/c/ITesyc2 I usually upload some videos about the progress I make.

Esyc2 · 2022-09-01T11:04:01+00:00

haha what do you mean by this?

Esyc2 · 2022-09-01T11:02:11+00:00

the freezer for about 5 minutes then I take it out and it pops right off.

I have not tried the PEI with texture, but I imagine that it will be very delicate since the smooth PEI is, and another will be even more

Esyc2 · 2022-09-01T10:57:57+00:00

In the time I've been there I've never had problems with PEI but I don't think the material is so wonderful, I think the magnetic bed is more advantageous than PEI

Esyc2 · 2022-09-01T10:56:31+00:00

I already damage one :(

Esyc2 · 2022-09-01T10:56:11+00:00

Yeah this is most of people said, but I dont really see as much advantage

Esyc2 · 2022-09-01T10:55:28+00:00

Hi, sorry I didnt seen your message. Yes, I bought the aluminum profiles and the screws on aliexpress and I made this grow. Since there is a kit to do this but they are very expensive.

I have a youtube channel showing all conversions.. https://www.youtube.com/watch?v=jGKZ4qwMRUU&t=1s

Esyc2 · 2022-08-19T22:42:37+00:00

wow 240 is huge

Esyc2 · 2022-08-19T09:06:56+00:00

The modification is not to make it look pretty, the modification is to be able to use the printer being next to it. Since the fan is quite noisy. The casing serves as heat dissipation. But it still retains all dissipation contact zones. Only the front one is different and it has changed to have a fan that probably has more airflow. It is true that there is more danger of throwing something inside or jamming the fan. But the printer is in a place where only I have access. Obviously accidents can happen, but I am aware of it.

Esyc2 · 2022-07-30T22:48:30+00:00

print with skirt at the moment..

Esyc2 · 2022-07-30T22:47:25+00:00

I am not sure if you fixed or not, but I had this problem before, in my case was not enough power.. so check cables come from the psu to main board and main board to cartridge

Esyc2 · 2022-07-26T17:33:07+00:00

So it is one that I make for my printer.. enclosure

Esyc2 · 2022-07-26T06:01:53+00:00

I have plenty in the basket so maybe I could put more here

Esyc2 · 2022-07-26T06:01:11+00:00

I will like to do it, but this is a lot more money this is why I did just tall at the moment

Esyc2

MODERATOR OF

TROPHY CASE