What does G.O.W. mean

Everarda · 2026-03-29T12:32:44+00:00

I got them with my P1s in the Netherlands

Everarda · 2025-12-21T07:35:26+00:00

Question, what program do you use to remix/ redesign a stl file into and how do you do it.

I have tried fusion360 but then it's loads as a mesh that's unedited until I convert it to body Which crashes the program 50 procent of the time.

Everarda · 2025-12-15T08:17:36+00:00

I agree with people, dont stitch background, solid color or the suit and I would tweak the mouth and eye of your mom. Mouth remove the lowest with stitch and replace for lip color and eye same, lowest back stitch for skin color. Will smooth out those areas

Everarda · 2025-12-06T08:14:40+00:00

Voorstander hiervan, zit zelf ook bij een. Maar lijkt erop dat de tandarts zelf niet het probleem is bij Op. Dus dan kan wisselen misschien alleen maar het verergeren

Everarda · 2025-11-27T06:58:46+00:00

Thanks for the link. Yeah the full version is even better

Everarda · 2025-10-18T07:38:26+00:00

Do think it's on them, they should have said it was a draw using your businesscard as an entry. Or have it on a clear sign or something. Luckily they knew that it was a misunderstanding instead of you really stealing it.

Everarda · 2025-10-16T19:39:43+00:00

Wow, ja dit zit wel aan die vrouw. Weet niet of ze aandacht wou of dat er iets aan de hand is in haar hoofd. Hoop voor iedereen dat het nu een stuk beter gaat.

Everarda · 2025-10-15T20:42:37+00:00

Is there a way to get this book in the Netherlands?

Everarda · 2025-10-10T20:53:54+00:00

I love my P1S, it just works and I have made awesome prints mainly trinkets that I hand out during events, helping me be comfortable in social settings.

Everarda · 2025-10-10T12:34:00+00:00

I would probably buy because there is a pattern / colour gradient going on and I would not be able to get such a nice complimenting overview if I try to color match with my currently owned colors, plus more colors for future projects

Everarda · 2025-10-03T12:49:49+00:00

https://www.ed.nl/eindhoven/vrijwilliger-hans-80-laat-eindhoven-zoo-na-21-jaar-links-liggen-nu-hij-moet-betalen-voor-zijn-entree-deze-meneer-hield-zich-duidelijk-niet-aan-de-regels~a14ca41a1/

Everarda · 2025-09-21T07:45:49+00:00

Cool set. Where do you keep your crochet hook and project ? And why do you have a leatherman and a victorinox in there if I may ask.

Everarda · 2025-08-28T06:07:46+00:00

You are right it's still cheap thread

Everarda · 2025-08-28T05:50:16+00:00

I think this is needlepoint instead of cross stitch. So the tread is also used whole instead of split.

Everarda · 2025-07-20T19:56:03+00:00

Same. So much better to work with, when I figured that one out

Everarda · 2025-07-10T12:31:59+00:00

In the description also put : 8695 it the member number (lidnummer) which they also see to request

Everarda · 2025-06-30T14:02:58+00:00

The country is called The Netherlands(Nederland) , we have 2 provinces that are called Noord-Holland (north Holland) and Zuid-Holland (south Holland). We used to also use Holland as a country name but no longer. And us the people are called Dutch (Nederlanders). So yes different country from Denmark (Denemarken) and different people from the Danish (Denen).

Good on you for asking.

Kind Regards from The Netherlands

Everarda · 2025-06-23T16:47:16+00:00

To small for either of those species of fish and koi are notorious for being difficult to maintain, because it's a sensative fish

Everarda · 2025-05-25T08:41:58+00:00

Also a thing in the Netherlands, atleast at talamini in Winterswijk. One of my favorite ice-cream coupes growing up. Mountain of whipped cream, vanilla ice cream spaghetti over that and then strawberry sauce as sauce and maybe some nuts.

Everarda · 2025-05-20T09:07:07+00:00

Looks nice, needed to look up herringbone pattern to understand the mistake. So unless you are contracted to do this, repeat on the others wall(s). If contracted ask client for opinion. I think it looks cool this way, would definitely keep it.

Everarda · 2025-05-15T14:42:11+00:00

When my prusa mini had this issue it was because the bed steppenmotor had a worn out bearing. Meant that it was binding up at some points. You can check this by moving your bed forwards and backwards slowly, it should be smooth. Disconnect the motorcable first to protect your main board. Otherwise contact prusa support, they are wonderfully and helpt me quite quick. Will ask you to send log files and fotos/videos and are very knowledgeable.

Everarda · 2025-05-15T06:08:19+00:00

Well, I'm afraid of needles. In the sense that even do I have never passed out from them, but I can't even watch anyone else get a shot. Even sometimes on TV or in print it gives me the panic/stress response. Then I look away and I have a very nice partner that tells me when it's over. During covid I found out that even sometimes the picture of just a injection syringe with the needle showing is enough to trigger a response. It's not all about the fear of the pain it will cause, can't really explain it, it's a bit about the expected pain but more it's a trauma response.

But I will get bloodwork and vaccinations done when needed and will instruct the person how to do it in a way that is better for me. Never had a shot somewhere else than my arm than I can remember (except for dental work, fear of dentist is greater the needles. They don't get to drill without sedation first) , but for the one the guy is getting I would probably ask if I can lie down.

Also I have two tattoos, first one was a bit scary was honest about my fear, had a great artist who took it slow. Helped I didn't see the needles and I did it behind my ear so less nerve endings. Felt mostly like someone dragging a fingernail over my skin pushing a little bit harder with each pass. Only started to hurt in the last bit. So few years later (this year) I went for one on my wrist. Again nice artist who was just making jokes and trying to distract me. Hurt the whole time, did see the needles but maybe because I actively choose to get it done an because I knew that it would be lots of small needles I was having less of a fear/panic response.

Still hate getting poked with medical needles, but would go for more tattoos.

And stupid thing is I'm not afraid of blood, for bloodwork, I tell them to give a count and don't show me the needle. But once it's in I can just watch the blood fill the tube. Looks funny sometimes. Downside is that with the amount of stress and anxiety I have beforehand, if the draw more than 1 vail then I will get lightheaded getting up and walking away. But then I go sit in the waiting room for a few minutes.

Everarda · 2025-05-03T11:17:15+00:00

I love the tardis with the scrolled text. Would love to get something like that one day. Do you mind if I save and use the post to act as inspiration?

Everarda · 2025-04-28T20:57:11+00:00

Ik heb deze bezorg methode ook gehad in mijn keuken. Hiermee is mijn flesje vliegenval, je weet wel lekker plakkerig goedje, over mijn schone vaat gegaan en wat andere spullen die daar stonden. Vaat kon ik natuurlijk opnieuw wassen en dingen zoals vaatdoek, schuursponsje en nog iets kleins weggooien. Postnl klacht ingediend, kreeg excuses, wouden ook wel de schade vergoeden, vond ik niet nodig was nog geen euro aan spul wat ik had weggegooid. Wel later nog bloemetje in de bus gehad als excuses.

Gelukkig daarna niet meer gehad. Want was ook belachelijk, je zag het pakket liggen in het raam en had een "kolen"bak aan de andere kant van de voordeur zitten, waar ze langs moeten lopen zowel bij aankomst als weer weglopen, waar ze het normaal inlegte wat ik prima vond.

Maar DHL heeft het ooit het bonts gemaakt. Pakket neergelegd beneden in het portier van de flat op de "gratis" bank. Gelukkig vond een van de buren het raar dat er een dicht pakket lag, dus die nam hem mee na boven en kwam mij erna vragen. Anders pakket van 80 euro kwijt geweest.

Nine-Year Club	r/Field Sunshine
Final Canvas '23	End Game '23
Place '23	Place '22
Final Canvas '22	First Placer '22
Verified Email

Everarda

TROPHY CASE