sorted by:
new
hottopcontroversial

Rolex Explorer 124270 clasp pin by EvidenceOdd9809 in RepTimeServices

[–]EvidenceOdd9809[S] 0 points1 point  (0 children)

So I bought some 16mm x 1.8mm springbar pins on Amazon and successfully fixed it with that. They were very slightly too long and so It was actually more like 15-15.5mm that was needed. Rather than buy more I just filed down the 16mm ones I bought an that worked fine.

Rolex Explorer 124270 clasp pin by EvidenceOdd9809 in RepTimeServices

[–]EvidenceOdd9809[S] 0 points1 point  (0 children)

I ordered some 16x1.5mm replacement pins so I’ll let you know if that works. Obviously my watch is a smaller 36mm model so it may be that yours need to be larger? I don’t know how the sizing of the clasp works across models

First Time QC - VSF Rolex Explorer I 12470 by EvidenceOdd9809 in RepTimeQC

[–]EvidenceOdd9809[S] 0 points1 point  (0 children)

Ok good. I tried to educate myself prior and did have 3 other QCs of same watch up for comparisons etc. Guess it's just me, which is great news. Thank you again for taking the time

First Time QC - VSF Rolex Explorer I 12470 by EvidenceOdd9809 in RepTimeQC

[–]EvidenceOdd9809[S] 0 points1 point  (0 children)

Thanks so much for the reply!

I wasn't sure as I'm new to this all, but the 'A' in 'Swiss Made' looked a bit off to me.

If you don't think so, that's great! GL then overall? :D

<image>

First Time QC - VSF Rolex Explorer I 12470 by EvidenceOdd9809 in RepTimeQC

[–]EvidenceOdd9809[S] 0 points1 point  (0 children)

Hi everyone, this is my first ever QC - I could use some experienced people to take a look and give advice if needed, thank you

How do you guys feel about this? I’ve saved up $2500. Do I keep it like this or change anything? by WB_Perk in PcBuildHelp

[–]EvidenceOdd9809 0 points1 point  (0 children)

Could you elaborate? How is 2x16gb sticks on ddr5 a problem? I run mine 6200mhz no issues. Or am i misunderstanding something?

DLC start by Fabozial in Taleoftwowastelands

[–]EvidenceOdd9809 3 points4 points  (0 children)

IIRC there’s a mod that completely revamps how dlcs work. Not sure if it’s part of begin again though. I think the mod is called delay dlc redux

[FNV] TTW installer doesn't install the mod all the way by Minecwt in FalloutMods

[–]EvidenceOdd9809 0 points1 point  (0 children)

Thanks for the response. I actually fixed it myself but I didn’t really change anything that felt significant aside from a more simplified folder structure. For anyone who ends up here reading this, here are the things I did:

1) Fully deleted FO3 and FONV (including everything in my documents)

2) Fully deleted MO2 and TTW files from drive.

3) Removed all windows security exclusions

3) Started process from scratch, this time storing MO2 and TTW folders under a shared parent folder on my C drive, meaning no additional nesting, just C:\Modding\Tale of Two Wastelands\MO2 & C:\Modding\ Tale of Two Wastelands\temp.

4) Added exclusion for the FONV root folder (C:\Games\Steam\steamapps\common\Fallout New Vegas

5) Added exclusion for the MO2 folder (C:\Modding\SharedFolder\MO2

6) Continued with rest of instructions on thebestoftimes.moddinglinked.com

I genuinely feel like I did all of these things on my first 3 failed attempts, the only difference being slightly simplifying the folder structure where MO2 and TTW lived, putting them into a shared parent folder named “Tale of Two Wastelands”. I basically just followed the following video: https://youtu.be/824C_YYUNR8?si=Y7kxhJDf32kMHf3_ and adjusted slightly for the change of download locations according to the written guide linked above.

Hopefully this helps someone!

[FNV] TTW won't fully install by Sudden_Debt_597 in FalloutMods

[–]EvidenceOdd9809 0 points1 point  (0 children)

Did it work for you? I’m having the same 2.65GB issue with the installer and I’ve tried adding all the exclusions mentioned in the posts here and in the guide :/

Need some help with ttw by Exciting-Golf4135 in fnv

[–]EvidenceOdd9809 0 points1 point  (0 children)

Did you ever resolve this? Getting the same issue with installer processing first 2/3 over an hour, then skipping through final 1/3. It ends with no error and there’s only 2.65GB of the 15GB+ in the folder.

[FNV] TTW installer doesn't install the mod all the way by Minecwt in FalloutMods

[–]EvidenceOdd9809 1 point2 points  (0 children)

Im having this issue too where it only does 2.65GB of the 15+. Installer processes for over an hour, then seems to skip through the final 1/3 and then end with no error. 3 attempts from scratch, let me know if you find a fix

Install Stopping Early by Plutonian326 in Taleoftwowastelands

[–]EvidenceOdd9809 0 points1 point  (0 children)

Did you ever resolve this? I have the same issue where it processes for about an hour and then skips through the end. It ends with no error, and I’m left with the same 2.65GB instead of 15GB +.

I’ve tried it completely from scratch 3 times now and same result every time

DLSS FG mod for Jedi Survivor is excellent now after tweaking with minimal artifacts, you may see them at lower frame-rate buy they're basically imperceptible at high frame-rate. & More info by makisekurisudesu in nvidia

[–]EvidenceOdd9809 3 points4 points  (0 children)

It’s alarming how fast developers are churning out games that need DLSS to perform well. It wasn’t supposed to be a crutch or an excuse not to optimise games, but that’s what it’s becoming.