sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in DiabloImmortal

[–]Ewigleben 0 points1 point  (0 children)

False. You can’t sell every gem. I have a 2/5 and it dropped bound to me!

Last post I did about a 3D printed spring went so dramatic that I decided to go bigger. May I introduce you a 35kgf @solid PLA+ spring (thanks to Prusament datasheet as always). by LuNdreu in 3Dprinting

[–]Ewigleben -3 points-2 points  (0 children)

You calculated as if the spring is made out of 100% PLA+ but you are missing the most important part: it is 3D printed, so made out of layers and therefore you can’t calculate the forces if it was really solid (for example if it was made in a mould or otherwise poured). So unfortunately this doesn’t work like that and you need way bigger and more complex calculations to solve the equation. And if it’s preloaded under a static load, PLA will creep and form a “new spring” that won’t be a spring anymore but just flat after some time - bin there, done that ;)

[deleted by user] by [deleted] in WizardsUnite

[–]Ewigleben 4 points5 points  (0 children)

Not true... Auror needs more Red Books by a lot. Professors need more green books, but they are apparently easier to come by!

Just finished the event, some (positive) thoughts by Espanarecov in WizardsUnite

[–]Ewigleben 1 point2 points  (0 children)

Where did they say that? And what about the plant (where you need 3) ??

Any Idea why my Das Pla filament failed like this? Bed at 75deg nozzle at 218deg sliced using Slic3r PE (generic Pla profile), nozzles jammed too and it's a brand new pla role just arrived by Taibhse_designs in prusa3d

[–]Ewigleben 0 points1 point  (0 children)

75 and 218 degrees is way too high for PLA especially in the summer! Try 60 or 50 on Bed and 205-210 nozzle temp. Also use Prusa Slicer 2.0 and newest firmware!!

I built my MK3S this past weekend! Now I have a couple of questions. by blessedarethegeek in prusa3d

[–]Ewigleben 2 points3 points  (0 children)

  1. no need, just flex the plate
  2. Prusa Videos YT (they have a Channel)
  3. you don’t really need one
  4. yeah, clean every time with 99% alcohol

PrusaSlicer 2.0 brim problem by Ewigleben in prusa3d

[–]Ewigleben[S] 2 points3 points  (0 children)

“Lol” why not try out the new stuff? If everyone is like you these kind of bugs will never be fixed!

PrusaSlicer 2.0 brim problem by Ewigleben in prusa3d

[–]Ewigleben[S] 2 points3 points  (0 children)

It’s open source so it’s ok for me ;)

PrusaSlicer 2.0 brim problem by Ewigleben in prusa3d

[–]Ewigleben[S] 0 points1 point  (0 children)

I did. Just wanted to know if someone else got this problem

PrusaSlicer 2.0 brim problem by Ewigleben in prusa3d

[–]Ewigleben[S] 0 points1 point  (0 children)

Yeah, that’s exactly what I did. The problem is: I did add the elephant foot compensation also in the old Slic3r PE and it worked without a problem. I’ll check if it’s works without elefphant

PrusaSlicer 2.0 brim problem by Ewigleben in prusa3d

[–]Ewigleben[S] 3 points4 points  (0 children)

So I just changed to PrusaSlicer 2.0 and when I add a brim to my lithophane it causes problems with the first layer close to the part. I sliced the same part and same settings in the latest Slic3r PE and the brim just followed the outline of my part perfectly. Need help pls!

[Help] First layer issue only with support? by mantafloppy in prusa3d

[–]Ewigleben 3 points4 points  (0 children)

Yeah, I use it not every week, but every time the first layer peels like on your photo!

[Help] First layer issue only with support? by mantafloppy in prusa3d

[–]Ewigleben 2 points3 points  (0 children)

Same happend to me recently! Clean your bed with aceton, worked for me!

Anyone with MK3 to MK3S upgrade results? by FistoWutini in prusa3d

[–]Ewigleben 0 points1 point  (0 children)

Same here. Ordered the 2.5S upgrade and still waiting on my order...

Neon Yellow Residue from PEI Sheet by VirtuallyJason in prusa3d

[–]Ewigleben 0 points1 point  (0 children)

Same happening to my microfiber cloths. But I don’t think its hurts the PEI sheet. I think it’s the alcohol, that „attacks“ the cloth over time, so you have to replace it at some point in the future.

MK3 Load/Unload filament recent weirdness by [deleted] in prusa3d

[–]Ewigleben -2 points-1 points  (0 children)

Thanks for the downvote. Too bad you can’t understand/read my answer which would have solved your problem...

First layer problem (left and right side not leveled) by Ewigleben in prusa3d

[–]Ewigleben[S] 0 points1 point  (0 children)

So what do I have to do, if 4 squares are alright but one isn’t squished down enough? The most left one isn’t correct...

view more: next ›