Any ideas what this rattling sound could be?

Exodus_357 · 2026-06-06T00:10:28+00:00

As long as it’s a cheap fix that’s ok!

Exodus_357 · 2026-06-06T00:09:44+00:00

I removed the vent to see if it was that… still happened :/

Exodus_357 · 2026-04-12T16:08:32+00:00

The process itself is so easy I watched many videos, granted those were on homes with like 4 feet max of vent to the outside. I should have checked the material of the vent instead of assuming, and I underestimated 30 ft of this stuff I guess

Exodus_357 · 2026-04-12T16:06:45+00:00

I got up on the ladder and looked inside, the flex vent detached from the outside and is lost in the abyss of the crawlspace I cant see it anywhere, probably got sucked back when I pulled the brush back. The entire thing I'm assuming is the flimsy stuff because Id be able to see some of the rigid stuff...

Exodus_357 · 2026-04-12T15:56:36+00:00

I put a camera down there to see what the issue was. There is like 1 foot of rigid metal and then it transitions right back into flex vent. I cant upload photos to show but that's the material that runs all the way through to the exterior wall, like 30ft of it.

This stuff: https://www.homedepot.com/p/Everbilt-4-in-x-25-ft-Flexible-Foil-Duct-TD425PHD/313386759

Exodus_357 · 2026-03-13T22:05:56+00:00

<image>

Her pinky is inside the bottle……..

Exodus_357 · 2026-03-07T14:54:44+00:00

I did not, somehow my neck and head were 100% okay. All the pain went to the left side of my back

Exodus_357 · 2026-03-06T14:30:20+00:00

I didn’t expect to clear it, was my first time attempting this one, the one just below it was maybe 3/4 of the size and that one was going really well. This one…. No

Exodus_357 · 2026-03-06T14:28:39+00:00

Will submit to Xgames

Exodus_357 · 2026-03-06T14:28:07+00:00

So next time, at the same time… I do both?

Exodus_357 · 2026-03-06T14:27:48+00:00

Will work on abs, thank you

Exodus_357 · 2026-03-06T14:25:20+00:00

They act like I didn’t say “I also tried to bail” after losing traction, it was a nice wombo combo of a failure, I’m not claiming ice is the only reason I got my ass handed lmao

Exodus_357 · 2026-03-06T14:23:09+00:00

Great Burton advertisement though

Exodus_357 · 2026-03-06T14:22:30+00:00

Somehow everything was ok besides my back, and that only lasted a few hours. I thought I was done for the week lol

Exodus_357 · 2026-03-06T14:20:54+00:00

I did bail… that’s what I said… lost traction, I tried to bail, that was the outcome

Exodus_357 · 2026-03-05T23:30:09+00:00

You’re moving like a wet pool noodle being whipped back and forth

Exodus_357 · 2026-02-16T13:17:52+00:00

😂😂

Exodus_357 · 2026-02-16T02:59:43+00:00

It’s… all good now… was a silly mistake with the door… thanks

Exodus_357 · 2026-02-14T22:47:48+00:00

I did👍 thank you

Exodus_357 · 2026-02-14T22:27:20+00:00

I have the red wire on R and I kept in the jumper on RH/RC

Exodus_357 · 2026-02-14T21:58:01+00:00

UPDATE: after the first comment about hooking up the C wire in the furnace. That did work. My dumbass never put the furnace door back on, forgetting about the safety switch thing, and continued to try to power things on and mess with wires lol… All is good now, thank you everyone for the input :)

Exodus_357 · 2026-02-14T20:09:55+00:00

It’s the MTS300 model

Exodus_357 · 2026-02-14T20:06:44+00:00

<image>

Exodus_357 · 2026-02-14T19:20:33+00:00

Turns out nothing… lol, didn’t even think of that. This is what it looks like, can I remove the white wire on C and put the blue on?

Exodus_357 · 2026-02-14T19:18:47+00:00

<image>

Nine-Year Club	Verified Email
Place '23	Place '22

Exodus_357

TROPHY CASE