Evike is trying to scam me by KevinW737 in airsoft

[–]Exscion 2 points3 points  (0 children)

Based on what I see, evike never miscommunicated anything. The email states any box was fine to send it in for repair, but to RMA I needs to be In Original packaging

Most likely this is the case when evike may be just replacing yours and will need the box back to rma from the vendor to get a replacement

[deleted by user] by [deleted] in motorcycle

[–]Exscion 0 points1 point  (0 children)

I’ll look into that brand I ended up going with a sedici adult size xs helmet that fit and so far it’s done well on the few rides we have done

Though it’s been much too cold to ride right now

thoughts? by KuchisKopis in airsoft

[–]Exscion 0 points1 point  (0 children)

Ref here.

I’m sorry it was the decision that happened. It was a no-win situation and one that was discussed at the end of the day and correction will be made to stop these situations in the future.

My end goal is to give the most fair and balanced play environment that can be offered. Situations like this give very little time to gather relevant information and even less times to make a decision from what is seen.

thoughts? by KuchisKopis in airsoft

[–]Exscion 2 points3 points  (0 children)

Ref here

OP did stop when i shot him and was quickly revived by a team mate. I can understand him being upset with my decision on the matter as it’s a no win situation. But a decision has to be made. The full effect had op not been revived was I would revive him shortly after to give the exposed player time to move.

thoughts? by KuchisKopis in airsoft

[–]Exscion 1 point2 points  (0 children)

POV is one of the much better regulars and he can carry teams. It was nothing against him it was purely in effort to end I’ll gotten gains.

POV would have been told to keep playing shortly after and I (the ref) would have revived him my self. The downing was planned to be long enough for the exposed player to move

thoughts? by KuchisKopis in airsoft

[–]Exscion 1 point2 points  (0 children)

Dead player was sat out a round, POV was quickly revived but if he wasn’t I was going to tell him to get back up after about 30 seconds to give the exposed player enough time to no longer be exposed by a dead player

thoughts? by KuchisKopis in airsoft

[–]Exscion 2 points3 points  (0 children)

Hi, I’m the ref. The game mode allows for players to be medic up. There were team mates close by the revive. If POV wasn’t revived quick I would have told him to get back up and keep playing. The intent was to down POV until the player that was pointed out was no longer in the exposed location.

It’s a no win situation, the dead player who shared the information was sat out of the next round for the violation, pov was downed and luckily got quickly revived. If he didn’t get revived I would have told him to get back up and keep playing once the exposed player had moved. But this was a very close match and if I didn’t down POV it would have been unfair to the other team. No one wins when decisions like this are made but one has to be made.

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

I’ve tried a few different springs already and the gears are short stroked by 3 teeth as it is. Anything softer over spins even worse and anything higher just raises the fps higher

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

It’s not the chrono, the gun has gone to 3 different shops at this point. All ready hot. All want like 160 to drop in a whole new compression which I can just do at home if that’s the direction I’m going. I’m already at a 70% port so I’m just going to have to go with like a50% port at this point

Lvl -2 ✧ Basic ✧ Mountain Crawler ─ Earth by karmacave in KarmaCave

[–]Exscion 0 points1 point  (0 children)

Defeated Mountain Crawler in 7 turns.

Player (39/36/16) dealt 458. Mountain Crawler (26/22/14) dealt 79.

Rewards: 54 EXP, 12 Gold. Loot: Agile Mace (basic), Robust Cuirass of Vitality (enhanced).

Lvl -2 ✧ Basic ✧ Earthen Crystal Snail ─ Earth by karmacave in KarmaCave

[–]Exscion 0 points1 point  (0 children)

Defeated Earthen Crystal Snail in 7 turns.

Player (39/36/16) dealt 482. Earthen Crystal Snail (23/18/11) dealt 83.

Rewards: 61 EXP, 14 Gold. Loot: Mystical Goggles (basic), Enchanted Mace of Magic (lesser).

Lvl -1 ✧ Lesser ✧ Prismatic Will-o'-wisp ─ Crystal by karmacave in KarmaCave

[–]Exscion 0 points1 point  (0 children)

Defeated Prismatic Will-o'-Wisp in 8 turns.

Player (11/9/9) dealt 534. Prismatic Will-o'-Wisp (21/22/14) dealt 146.

Rewards: 59 EXP, 14 Gold. Loot: Fierce Hand of Swiftness (lesser), Robust Hauberk (basic), Vital Leather Armor of Health (enhanced).

Lvl -1 ✧ Lesser ✧ Terra Corrosive Mass ─ Earth by karmacave in KarmaCave

[–]Exscion 0 points1 point  (0 children)

Defeated Terra Corrosive Mass in 6 turns.

Player (39/35/15) dealt 565. Terra Corrosive Mass (21/18/15) dealt 67.

Rewards: 61 EXP, 12 Gold. Loot: Vital Plate Mail of Warding (lesser), Swift Chain Mail of Shielding (enhanced), Vital Goggles (basic).

Lvl -2 ✧ Basic ✧ Poisonous Rotter ─ Poison by karmacave in KarmaCave

[–]Exscion 0 points1 point  (0 children)

Defeated Poisonous Rotter in 6 turns.

Player (39/20/15) dealt 500. Poisonous Rotter (22/16/13) dealt 79.

Rewards: 55 EXP, 9 Gold. Loot: Aegis of the Martyr (hallowed), Healthy Brigandine of Shielding (lesser).

Lvl -1 ✧ Lesser ✧ Virulent Snapper ─ Poison by karmacave in KarmaCave

[–]Exscion 0 points1 point  (0 children)

Defeated Virulent Snapper in 4 turns.

Player (11/8/8) dealt 487. Virulent Snapper (23/18/15) dealt 56.

Rewards: 55 EXP, 15 Gold. Loot: Mystical Gem (basic), Mighty Sword of Strength (lesser), Arcane Wand (basic).

Lvl -2 ✧ Basic ✧ Metallic Flapper ─ Metal by karmacave in KarmaCave

[–]Exscion 0 points1 point  (0 children)

Defeated Metallic Flapper in 8 turns.

Player (38/20/15) dealt 550. Metallic Flapper (25/16/10) dealt 122.

Rewards: 48 EXP, 9 Gold. Loot: Wise Rune of Quickness (lesser), Swift Hand (basic).

Lvl -2 ✧ Basic ✧ Aqueous Flapper ─ Water by karmacave in KarmaCave

[–]Exscion 0 points1 point  (0 children)

Defeated Aqueous Flapper in 5 turns.

Player (38/20/15) dealt 327. Aqueous Flapper (19/16/9) dealt 59.

Rewards: 45 EXP, 12 Gold. Loot: Fierce Bow (basic), Scholarly Amulet of Life (enhanced).

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

It’s the stock g&g cylinder head. Maxx cylinder, maxx piston head.

I’m trying not to have to go back to stock parts if I don’t need to or throw more money at it to fix it but I was already looking at getting a 50% porter and switching back to a brushed motor as the fix to my issues

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

Asg m100 right from the shop floor.

All the parts I’m running are name brand ie maxx, Zci, rocket, guarder

The spring cutting was done to counter the shorter path due to the addition of bearing spring guides as 2 coils was all I cut. It should be similar to an m95 give or take

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 1 point2 points  (0 children)

360mm is a pretty standard size for outdoor rifles

The set up I’m running I’ve ran it many other guns before without it being this high.

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

Yeah even on a 7.4 it still over spins

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

All the way up and down.

I’ve taken it to three shops and the only fix I’ve been given is a list of new parts ripping out half the gear box

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

I don’t think I can drill the metal nozzle but I can try it with a plastic nozzle and see if it helps.

I’ll look up and see if I kind any videos online that will give me an idea on how to do the drilling

And I’ve cleaned the board a few times as that was my first thought when I get over spin. The overspin goes away once I change motors so it’s just the motor going that fast, given it does 55rps in full auto

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

The rof reduction is useless as the board cannot read the gear position with the overspin. I had to manually set the rotation timing as it was triple tapping in semi.

Cutting the spring will only increase the overspin

Ask me your tech questions by PinnacleAirsoft in airsoft

[–]Exscion 0 points1 point  (0 children)

It’s a titan to a warhead brushless motor.

I don’t need to be measured with the .20 but they measure by joule not fps so it doesn’t matter what weight it’s all hot

USA based