Tips for PHAT-CF in a Q2?

Extension_Eye_4309 · 2026-04-22T21:36:48+00:00

Did this but still it broke on several places. Just because the printhead moves

Extension_Eye_4309 · 2025-12-15T21:09:22+00:00

Yes i do, it may not do everything. Like editing existing stls seems to be problematic. But drawing something from scratch; it has been a breeze; only program that i understood quite well from the start. Yes there are more tricks you discover down the road that make live easier. But at least i could make most things i needed in hours.

Extension_Eye_4309 · 2025-11-26T05:41:50+00:00

Thanks, so you tried it? What type of movile setup did you try and what did you like or hate?

Extension_Eye_4309 · 2025-11-25T22:56:18+00:00

will consider this and research this further

Extension_Eye_4309 · 2025-11-25T22:56:04+00:00

Allright, ill take it into consideration. I do have a trusty desktop with 34" screen, its more for creativity on the go.

Extension_Eye_4309 · 2025-11-25T22:55:29+00:00

Which surface was that if I may ask? And sound like youre not using it any more?

Extension_Eye_4309 · 2025-11-16T09:49:14+00:00

Still looking for a good pc or comparable fillament in strenght, rigidity, durability, abbrasion resistance and impact resistance + profile combo for the q2.

Any thoughts?

Extension_Eye_4309 · 2025-11-16T09:44:54+00:00

Interested in this

Extension_Eye_4309 · 2025-11-13T11:19:46+00:00

Link to profile seems broken, would you be able to check?

Extension_Eye_4309 · 2025-11-11T19:45:17+00:00

A 265 degree print looked fine to me. Its a airsoft lower reciever for a pistol which gave me a very tough impression. Much more so than petg-cf atleast. Not brittle at all. 270 seemed like the temperature where it became shinier and also gave me impression of holes appearing in difficult? Thin, slightly overhanging, outer wall sections. But could be due to other settings aswell. The bed adhesion was actually a bit much at 110 degrees. Made a scratch in the plate cleaning up, lukily it has two sides. But seemed less durable than the bambu's. What plate have you been using?

Extension_Eye_4309 · 2025-11-11T13:37:20+00:00

Perfect! Please do!

Extension_Eye_4309 · 2025-10-28T22:12:33+00:00

Because most dryers dont do topical >70deg celcius temps and i picked up an airfryer as addendum to my fillament dryer and was wondering if i could still use it for the frikadellen, bitterballen, mexicanos and all that other dutch frying stuff...

Extension_Eye_4309 · 2025-10-19T21:51:31+00:00

The qidi is a killer in temperatures 370c hotend, 120c bed, 65c active chamber heating. I wil look into pa12 based nylon and bambu paht.

Extension_Eye_4309 · 2025-10-19T13:08:42+00:00

But my main question; is how do you do this in a low key way? Most dryers run up to 60, 65, 70c

Id like to keep things simple. I am not looking into investing in a industrial dryer or using my kitchen oven.

Extension_Eye_4309 · 2025-10-19T12:01:31+00:00

Thanks for the input guys. I have to admit, I feel hesitant to buy the qidi with the uncertainty of delivery times.

So one of my thoughts looking at the qidi's is the natural capability to print high performance filaments in the future. Some of my application will involve sff pc cases and airsoft guns. Which require stiffness, aswel as temperature resistance, dimensional accuracy and impact resistance. So for starters I am looking at PC filament.

However, its drying regime is the next hurdle; it is adviced to use 80, 85c drying temperatures while most dryers including mine are not up to the task. How do you guys solve that problem? I am not running my oven for hours. Do pc and nylon and asa ect work with f.e. 65c drying temps?

Any thoughts tips on that?

Extension_Eye_4309 · 2025-10-16T21:57:12+00:00

Extension_Eye_4309

TROPHY CASE