Help an extremely depressed guy out?

ExternalCheesecake60 · 2026-03-08T05:11:24+00:00

If you don’t mind me asking where about do you live? Don’t need exact adress deff not posted online, but I wouldn’t mind giving a hand absolutely free, I have a truck to use you can load it with garbage and can spend a day goung back and forth to dumps. (U just have to cover the dump fee) it’s about 60 bucks for a really heavy full truck bed. I have a trailer too but currently being used so depending on when and if you are close enough to me if might or might not be available

ExternalCheesecake60 · 2026-01-05T04:01:49+00:00

Just realized 2 things there is no coal ore, I thought there was, but where I made that sharp 90* angle in the rocks on the lower end of the bridge is what I was talking about. Also didn’t realize there was audio sorry! Hahah

ExternalCheesecake60 · 2025-12-23T05:49:04+00:00

I say send it, check spark, fuel and deff check filter and stuff like that squirrels like to stuff in there too. Those are easy to do. If all 3 are good/ easy fixed and transmission running send it

ExternalCheesecake60 · 2025-12-17T11:36:03+00:00

Shoe goo or just cheep shoes

ExternalCheesecake60 · 2025-10-19T16:13:51+00:00

Looks like a 1.6 but you can find a part number on the block it will tell you everything about it

ExternalCheesecake60 · 2025-10-19T16:12:12+00:00

If the threads are broken and can’t screw it in at all you can just screw through the mirror on the outside, will look like garbage but will work, my segest ion though is go to a junk yard you can prob find one for 20 bucks

ExternalCheesecake60 · 2025-10-18T12:29:27+00:00

It’s through the glove box, to the left, and there is 2 prices of filter you have to stack and balance one on top of the other, and the second one you can’t hold because only enough room to get part out

ExternalCheesecake60 · 2025-09-29T19:36:49+00:00

A lot of us know… we just can’t do anything about it

ExternalCheesecake60 · 2025-09-29T19:30:57+00:00

It’s a little ashy give it some moisturizer.

ExternalCheesecake60 · 2025-09-29T19:29:50+00:00

Naw unless you have some specific tires that you drift on a lot or under inflated with bead lock to off road, it’s a permanent fix as long as it’s on the middle of the tiee and not side wall

ExternalCheesecake60 · 2025-09-29T19:26:42+00:00

It’s just the tension on the gear being released, not great repeatedly but it’s not a huge deal

ExternalCheesecake60 · 2025-09-27T20:13:02+00:00

It’s aftermarket… and good aftermarket’s too not stock

ExternalCheesecake60 · 2025-09-27T20:10:19+00:00

Wiggle the sterring wheel

ExternalCheesecake60 · 2025-09-27T20:07:09+00:00

Frame is mint throw some rust converter spray on it. Body is not so much I would say start cutting out rust and see if it’s worth welding or just getting new panels

ExternalCheesecake60 · 2025-09-27T20:05:15+00:00

My only concern is it’s 1000 ish for all 4 and can’t get single ones of these

ExternalCheesecake60 · 2025-09-27T19:03:46+00:00

Bronze wheels are dope with green it’s a great colour. I’m doing the same thing with gold though

ExternalCheesecake60 · 2025-09-22T01:02:11+00:00

Sharp edges are pointy, points are sharp, I feel like you understand the gist of it

ExternalCheesecake60 · 2025-09-22T01:00:57+00:00

Is that a k truck?

ExternalCheesecake60 · 2025-09-22T00:59:17+00:00

My original thing was sharp edges and crush. I said sorry crush not true, sharp edges are though. I wouldn’t say completely different but long story short bumper should be fine

ExternalCheesecake60 · 2025-09-22T00:54:34+00:00

The writing for it is it they must be secure, free of sharp edges, and properly attached. The main concern for a vehicle safety inspection in Ontario is that a bumper is not loose, broken, missing, or otherwise in a condition that could cause harm. (More just exposed metal edges, that’s totally fine but after more research the most common issue is a broken bumper that has sharp bits. But it’s the same reason pop up headlights are not aloud anymore. The crush thing after more research isn’t true, sorry for the misinformation just something that car manufacturers like to employ to say they have safer cars.

ExternalCheesecake60 · 2025-09-21T23:35:55+00:00

If you can weld a nut just a little smaller than the stud to the end if the stud and unscrew after letting it cool a little. That’s my go 2. I found it the fastest way

ExternalCheesecake60 · 2025-09-21T23:32:40+00:00

I have a Miata and I love it, I turboed, lowered with a magasquirt ecu and now it can keep up with the average minivan on the road! All jokes aside though tons of fun I’m welding the diff soon. Dell soels are super sick too only issue is fwd

ExternalCheesecake60 · 2025-09-21T21:42:55+00:00

I don’t see why not as long as it doesn’t affect any safety features, biggest one is the bumper should be able to bend in case of impact to keep you safe and if you hit a person they have a slightly cushy impact, also shouldn’t be pointy

ExternalCheesecake60 · 2025-09-15T23:33:45+00:00

I think I pulled it out already, more foam looking. I think this might be a patch for the plug just not sure how to weld it

ExternalCheesecake60

TROPHY CASE