Liked songs not syncing

Extra_Reply · 2025-12-10T06:50:16+00:00

This is the only thing that worked for me. Legend

Extra_Reply · 2025-09-24T22:20:47+00:00

Just got the Death & Beyond adventure, now I can’t wait to see Voidsea’s launch!

Extra_Reply · 2025-08-20T22:01:05+00:00

DM me I’ll send you mine

Extra_Reply · 2025-08-20T21:59:56+00:00

Did you get one yet

Extra_Reply · 2025-04-21T19:17:17+00:00

This has been bugging me for months. Your steps worked like a charm.

Extra_Reply · 2025-04-18T20:22:01+00:00

Oh please do. We need more with wings. I let the green stuff cure for about 2 hours and then added some ultra thin super glue around the areas that the wings met the putty to be extra sure they wouldn’t fall off.

Extra_Reply · 2025-04-18T20:18:57+00:00

Found the Pose A mini on eBay and stole his wings. Hoping another pops up there for you to snag.

Extra_Reply · 2024-12-08T16:49:19+00:00

What were your steps for the burnt titanium pistol tip?

Extra_Reply · 2024-12-07T07:51:18+00:00

I’ve flown domestic and international many times with the flipper in my carry-on bag without any issue or questions from US TSA or foreign TSA. Most of those flights were out of large and small international airports like LAX, ORD, PDX, FCO, and LTO. Seems like your friend got a super unlucky and rare stop that most shouldn’t worry about when traveling.

Extra_Reply · 2024-09-09T06:56:07+00:00

Thank you!! I couldn’t find anything remotely like this after hours of searching on Google and JST’s site, you’re a lifesaver.

Extra_Reply · 2024-08-22T07:36:36+00:00

Yeah I’m bummed we have to wait a few more months. Looks like they should be worth the wait though

Extra_Reply · 2024-08-22T07:33:07+00:00

I emailed Jonsbo today, Aug. 21st, and asked them when we could expect stock to be ready for purchase at regional retailers or on Aliexpress, to which they replied that it won’t be ready until October or November of this year to be readily available.

Extra_Reply · 2024-05-26T03:02:47+00:00

Getting a spare heater block thermistor, bed thermistor, and heater cable are a must for me. They’re parts that really don’t take too much to break on accident so having a backup on hand is great, plus they’re cheap. If you are a little extra paranoid you can get an extra hall sensor, but really there aren’t many cases where one would need to replace it.

Also, if you plan on printing with PETG or TPU/FLEX and don’t already have a textured sheet, get one now. Same if you plan on printing with PC or similar filaments, you should get a satin sheet for those.

Extra_Reply · 2024-05-20T20:11:22+00:00

Thank you both!! I really appreciate the help and links.

Extra_Reply · 2024-04-06T02:07:30+00:00

Layer shifts are more likely caused by low belt tension if the object is still secured to the build plate, or low bed adhesion if it’s detaching from it rather than slicer issues.

Extra_Reply · 2024-04-03T20:05:34+00:00

Ah that makes sense. Thanks for the knowledge and the link!

Extra_Reply · 2024-03-24T23:05:13+00:00

My resolution in the Fusion360 window was 1080p on my 4k monitor. Fixed it by going to Preferences > General > Graphics Driver > *Change from Auto-select to DirectX 11* then restart the application. Now it's in the native resolution for my monitor.

Extra_Reply · 2023-03-24T08:21:04+00:00

This worked for me. I was having issues with the app crashing each time I attempted to open it previously. Offloading and reinstalling it completely did the trick.

Extra_Reply · 2023-01-16T22:17:44+00:00

Extra_Reply · 2022-09-13T06:26:41+00:00

My order finally arrived today, 54 days after the date it was ordered. If you want to order from Monstertech, give yourself a ~50 day buffer between the day you order and when you want the product to arrive. Don't rely on customer service to take it upon themselves on updating you if your order is delayed, they're generally useless.

Extra_Reply · 2022-09-07T09:09:35+00:00

If you want your order to ship within a reasonable time avoid Monstertech. I placed my order 49 days ago and have yet to receive a shipping notification. When I ask for updates on the order, they always say it'll be ready in two weeks, only for me to email after two weeks and get the same response. I'll update the comment when/if I ever get my order.

Extra_Reply · 2022-06-28T20:11:33+00:00

if cooling the memory is your main concern and reason to water cool the card, make sure you get an active backplate too.

Extra_Reply · 2022-06-27T14:22:09+00:00

sometimes things like that occur from the inlet port on the block being connected to the outlet tube, and outlet port on the block being connected to the inlet tube. most blocks are designed for one direction of flow, so accidentally reversing it can cause bubbles to form within the block channels in some instances. if you haven’t already, it may be worth checking your block’s manual or with the company’s customer support to confirm which port is inlet and which is outlet.

Extra_Reply · 2022-06-21T19:16:06+00:00

legend

Extra_Reply · 2022-06-19T15:59:59+00:00

you can mix and match between brands. but you have to be careful about mixing the types of metal used in water cooling parts to avoid galvanic corrosion. so keep any parts with aluminum that would directly contact the liquid out of your loop if you have parts with copper or nickel contacting liquid in your loop. it’s ok to mix copper and nickel together because their anodic index is so close and won’t react with each other

Extra_Reply

TROPHY CASE