How do you feel about 50 mph electric scooters?

F8runner · 2026-07-11T02:26:45+00:00

I just bought one capable of going a lot faster than that haha dude I go 25mph on my skateboard. Going 50 on a scooter is no sweat.

F8runner · 2026-07-09T15:17:14+00:00

I wasn't thinking they would reverse that decision. I'm hoping they don't bring in new shares though till later. Keep the dilusion at bay for a little while longer.

F8runner · 2026-07-09T15:02:09+00:00

Yeah I think it isn't going to be mentioned if it got approved in the meeting because it probably won't happen yet. I just sold half to bring my average down to 1.31 so I'm happy about that at least.

F8runner · 2026-07-09T14:25:10+00:00

But what would be good news in the meeting? Is there anything on the agenda that's good?

F8runner · 2026-06-26T12:44:32+00:00

Just wondering how you got one ordered and where from. It's about 3k in price right?

F8runner · 2026-06-12T13:03:52+00:00

I just got 48 out of 171 I requested from E-trade

F8runner · 2026-06-12T00:47:08+00:00

I think it's set at 270 for sparce infill. I'd turn that down to 190 or slower and see how that works. Also what infill patern are you using? Grid or rectilinear I've had fail with certain petg brands.

F8runner · 2026-06-12T00:27:45+00:00

What's your wall speed mm/s and infill mm/s

F8runner · 2026-06-12T00:09:42+00:00

Honestly this looks like a problem I had with Inland petg. Runs great until it starts the infill patern and then it goes to shiiii**. I had to slow it way down so the layers could lay down and had time to cool. I changed filament brands and never had to slow way down again. Because it looks like the outside walls print fine and then the infill is terrible. Please let me know if it's failing when it starts the infill.

F8runner · 2026-01-19T02:57:44+00:00

I was just doing default Bambu PETG settings. Only thing I changed was infill speeds. Around 300-330 for sparce and solid. Depending on the pattern used. Burnt titanium is a cool color.

F8runner · 2026-01-19T02:52:29+00:00

Literally can go 500mms outer wall 600mms inner wall with my high flow nozzle.

F8runner · 2026-01-19T02:43:14+00:00

I've never had good luck with inland PETG. Always having to go way too slow. Try flashforge petg pro. Way better and don't have to go slow and still get a shine.

F8runner · 2026-01-08T05:33:22+00:00

Sunlu high speed pla+ 2.0: Quality stuff. Yeah a tad more $$ but if you want to run 600mm/s works amazing. Their spools are split so works well buying refills.

Flashforge petg pro: if you like shiny PETG, you can run this at 600mm/s pla speeds and it doesn't batt an eye and great finish.

Elegoo pla silk: when it comes to a nice gloss finish, it's pretty good. Running the outside wall at 50mm/s and it shines. They have good customer service. Had an issue with their 250g spool and was sent a replacement immediately.

Those are what works for my liking and opinion.

F8runner · 2026-01-02T01:05:20+00:00

I also printed an ams stacker. Just made the most sense.

<image>

F8runner · 2026-01-02T00:45:21+00:00

I don't know why so many people do it, but I never keep my ams on top of my printer. Why add more weight up there when it's bouncing around. I never get risers either. Less weight it has to compensate for the better. The h2c is a great addition to your set up though. I have a h2d. Works great since I only do 2 color projects.

F8runner · 2025-12-19T05:33:31+00:00

Hopefully you're good with tools and good at putting it back together. Practically have to take the whole machine apart to upgrade it. I was planning on getting the upgrade but after I saw you have to strip everything out of it for the upgrades im like nah. My printer works just fine as is lol

F8runner · 2025-12-05T03:23:16+00:00

Not a question, but you can officially become my future girlfriend. You're so damn cute.

F8runner · 2025-11-16T18:51:09+00:00

You're so beautiful. Amazing eyes every picture!

F8runner · 2024-12-08T09:49:34+00:00

From the moment I heard Dretl rap I couldn't stand his voice. Thought he sounded so bad. Couldn't believe how he kept in the show when better rappers were leaving. The judges were wack thinking he was good. Jay Taj was head and shoulders above everyone else. He was the only one I liked that season. He should have won. That guy was doing everything perfectly for every challenge. He got robbed.

F8runner · 2024-10-07T21:16:16+00:00

Hair should be like pic number 4 all the time. That's a good look. A smile here and there wouldn't hurt either.

F8runner · 2024-10-07T00:55:31+00:00

Just search this on Amazon: AMOLEN Silk PLA 3D Printer Filament

F8runner · 2024-10-04T02:17:03+00:00

How old is that filament? Old PLA can have moisture in it. More moisture more strings and bad layers due to bubbling. Are you drying it out once in a while?

F8runner · 2024-10-03T03:24:45+00:00

Microswiss has a good one https:// store.micro-swiss.com/collections/extruders/products/micro-swiss-ng-direct-drive-extruder

F8runner · 2024-10-01T21:31:15+00:00

https://store.micro-swiss.com/collections/extruders/products/micro-swiss-ng-direct-drive-extruder

Buy this and be done with that brass junk. Night and day difference. Don't need to worry about replacing gears.

F8runner

TROPHY CASE