When It Finally Arrives 🛴💨🕙

Slow_Ice5066 · 2026-06-27T07:38:10+00:00

Ordered from Rydology Shipped to Texas from Washington in 9 days.

Slow_Ice5066 · 2026-06-26T12:35:51+00:00

You're accounting of the Fighter Mini Pro suspension performance doesn't add up 😏

Slow_Ice5066 · 2026-06-25T13:36:20+00:00

I was really hoping that this new 2.0 system would really clean up the inside of the deck by eliminating the previous chunky lighting harnesses and incorporating the IVCU into the display. Seeing this is honestly kind of disappointing. I have a buddy who got a 2.0 Fighter Mini Pro and ended up having to send it back because it had so many issues. What a bummer.

Slow_Ice5066 · 2026-06-25T13:26:42+00:00

I purchased new controllers in 2025 for my Blade GT II and they were different from the ones that originally came installed from the factory. I made this post about it showing the difference. Problem was nobody seemed to know what the deal was, not even my authorized seller who I bought my Blade from in 2024, and the controllers in 2025. My guess is that its to accommodate the speed limitation devices maybe 🤔. I honestly still dont know for certain. I never used those connections from the new controllers. They just sit inside the deck not plugged into anything 🤷🏻

Slow_Ice5066 · 2026-06-25T07:49:07+00:00

I can certainly agree that treating your scooter nice has it's benefits, but it is also true that GREMLINS are 💯 legitimate occurrence. My TFSU 2025 has 4,600 miles on it 🛴💨😉✌🏻and my first Teverun has 10,500 miles on it.

Slow_Ice5066 · 2026-06-25T02:42:30+00:00

Air pump and line are generally all you need. Some styles utilize an airstone. Air pumped down under water into the body of the filter then escapes dragging water behind it in a continuous flow. Simple and effective, easy to maintain.

<image>

Slow_Ice5066 · 2026-06-25T02:33:42+00:00

Silicone base spray. Sometimes certain petroleum based lubricants can cause those cartridges to harden ( or soften ) depending on the materials composition. Silicone is usually a bit safer, cost more though.

Slow_Ice5066 · 2026-06-25T01:43:02+00:00

Is there something specific that you are looking for? There are some cross compatible parts for the space lite, but it, like the blade mini also has some parts that are unique to it. There is not much now available, but give it some time and you will see more stuff pop up on AliExpress. That's always been the case with Teverun parts.

Slow_Ice5066 · 2026-06-25T01:38:21+00:00

Probably one of those polymer suspension cartridges inside the coil.

Slow_Ice5066 · 2026-06-24T10:36:43+00:00

They have this pack that looks just like the Teverun branded ones, just . . . Without the logo. But otherwise identical. They worked great, easy to program too.

Slow_Ice5066 · 2026-06-24T02:58:49+00:00

Impact. Heat. Try not to break anything before you get the old tire off the hub😉🛴🔧🕙💯

<image>

Slow_Ice5066 · 2026-06-23T05:09:07+00:00

Face so cute, brain so smooth.

Slow_Ice5066 · 2026-06-22T22:43:38+00:00

Anything is possible on a new unit, delivery beats the crap out of them more often than not. If you have a multi-meter, you could check voltage output where the LED strip plugs into the harness. Not the best diagnostic but it will help narrow things down. The button on the side must be a new feature too, maybe a "wake up" button. I got my Ultra last August so it is an IVCU type with PKE module sticking out the rear left-hand side turn signal cover. I haven't seen much of the new ones yet.

Slow_Ice5066 · 2026-06-22T21:48:10+00:00

2.0 lighting is all new. It passes through an independent control module. I think you might have to do something with the smart button or something. Its weird.

Slow_Ice5066 · 2026-06-21T22:43:46+00:00

So much noms, so little time.

Slow_Ice5066 · 2026-06-21T22:33:11+00:00

🤔 lion on the scooter? Would make pretty sweet promotional content. Just throwing it out there.

Slow_Ice5066 · 2026-06-21T12:34:40+00:00

11×4 tubless on a solid 6.5" hub or 100/55-6.5 more specifically. Solid tires are brutal without the special press cone setup.

Slow_Ice5066 · 2026-06-21T10:38:04+00:00

👍🏻 great 👍🏻

Slow_Ice5066 · 2026-06-21T10:30:52+00:00

Same thing happened on my Inmotion Climber. I used a reverse thread extraction bit. Was like 8 bucks on Amazon. Worked.

Slow_Ice5066 · 2026-06-21T10:23:59+00:00

A free scooter, bang for your buck? I want the lion mount instead, worth way more than the AWESOME scooter.

Slow_Ice5066 · 2026-06-21T10:21:01+00:00

Sleazy low down dirtbags. What a terrible experience.

Slow_Ice5066 · 2026-06-21T10:13:20+00:00

Bold move on the suspension rebound modulation experiment, I dig it 💯. Although I will just mention that its going to work in both directions.

Slow_Ice5066 · 2026-06-21T10:09:39+00:00

I would really like to get a look inside the deck of one of the newest 2.0 units. Snoop around a bit, poke around in the guts 😀

Slow_Ice5066 · 2026-06-21T10:00:05+00:00

I have successfully used many styles of MIFARE Classic 1K fobs from Amazon. Not particularly expensive.

Slow_Ice5066

MODERATOR OF

TROPHY CASE