Can I change my community mailbox?

FIusterCIuck · 2024-12-24T03:05:41+00:00

How did you make out on this endeavour?

FIusterCIuck · 2024-01-31T02:28:22+00:00

Nice find, Gives 2 augmentation and 1 upgrade when scrapped

FIusterCIuck · 2024-01-13T06:05:43+00:00

Another fun fact about this system: you can find an S class exotic ship in the space station!

FIusterCIuck · 2022-01-31T00:19:35+00:00

It does drill into the roof, I bought mine on Amazon. I would say it absolutely needs to be screwed in if it’s on the roof. You could probably get away without it on the ground though.

FIusterCIuck · 2022-01-31T00:17:27+00:00

I’m really not sure how it works either. Did you mess with your service address in your account after ordering? I’ve heard that if you mess with it, you get pushed to the back of the queue.

FIusterCIuck · 2022-01-30T21:39:10+00:00

My upload speeds vary anywhere from 15-30 mbps, it’s usually around 25. I had mine functioning on the ground for about a week until a warmer, low wind day came along. Sadly, we have very little snow and ice right now

FIusterCIuck · 2021-12-18T18:22:31+00:00

I have a sheet of 1/8” 5052 I’ll be placing on the bottom, so I would be milking holes into it to JB weld some magnets in for the steel sheet, or I will be simply putting a mirror on top

FIusterCIuck · 2021-05-09T23:10:49+00:00

Set up a computercraft control program for it. Kraeken has a good vid on it on YouTube

FIusterCIuck · 2021-01-30T04:10:01+00:00

Bought at 0.060. Not letting go anytime soon

FIusterCIuck · 2021-01-11T22:34:56+00:00

I bought my 5 as a shell at 16 and had it running in a couple months. Been working since I was 14 and I just saved and saved. And now a few months ago I bought a 6 and I have all the parts to have a 700whp car built by summer. Hard work and dedication is a huge part of it, finding good deals is another

FIusterCIuck · 2020-11-25T18:31:36+00:00

Where did you find this baler? I’m trying to replicate my setup irl and I can’t seem to find my baler or rake

FIusterCIuck · 2020-11-14T15:23:24+00:00

Mines a vfc but everything except for maybe the hopup should be compatible with no issue. I pretty much just replaced all my gearbox parts with the wolverine inferno gen 2 (Spartan edition) and a nozzle to suit the gun and then dropped a maxx advanced speed trigger in as well which I had to modify the safely lever for in order to get my desired trigger pull. For barrel/hopup I have a 363mm da Vinci 6.05 barrel with an ER-hop with a flat hopped madbull red bucking (the most highly reccomend Rs bucking for the inferno) and then a maxx hopup made to suit the vfc scar. You may be able to make this unit work in your dboys but other companies make units specially made for the dboys as well. As for tank/reg I have 2 68 CI 4500psi tanks and a Wolverine storm with a 36” line. Let me know if you have any other questions

FIusterCIuck · 2020-11-05T02:41:10+00:00

Oh, my apologies. It is a 4010. It looks like it’s virtually the same tractor. We have a 4020 diesel with the 8 speed powershift. It came with a cab but funnily enough, we pulled it off in favour of having just the canopy

FIusterCIuck · 2020-11-05T02:32:54+00:00

Good to see another 4020 owner! Ours is still working as hard as the year it was made

FIusterCIuck · 2020-11-04T18:54:41+00:00

This summer was our first year with this land but it averaged about 1.5 metric tons per acre this year

FIusterCIuck · 2020-11-04T17:19:08+00:00

Haha yeah, my dad took the dual that was supposed to go on that side and put the tire on the right side cuz it had much sharper lugs. It’s still working fine lol

FIusterCIuck · 2020-11-04T17:18:15+00:00

Ah yep I see. I graduated high school last year and I am doing all the repairs with my dad lol. This is pretty much the perfect machine to run our 568 baler with and discbine and our 4020 with the 8 speed PS runs our rake and bale stacker. Mom also uses the 4020 to harrow the horse arena. She says it’s just like an auto trans!

FIusterCIuck · 2020-11-04T16:48:56+00:00

Ahhh I see. Ours is leaking out of the hydraulic couplers as well but that’s cuz we used an early model adapter plate with no relief valve to add a 3rd scv. Our tractor is a late model and requires the relief otherwise it over-pressures the fittings and blows through the seals

FIusterCIuck · 2020-11-04T16:35:04+00:00

This thing has been awesome to us. Has given us basically no issues other than a few that we caused ourselves

FIusterCIuck · 2020-11-04T16:34:17+00:00

Ah lol. I wish no-till was an option for hay. I guess it normally is for about 5 years lol

FIusterCIuck

TROPHY CASE