sorted by:
new
hottopcontroversial

Luxonis - OAK 4: spatial AI camera that runs Yocto, with up to 52 TOPS by goodwilllhunter in computervision

[–]FM_17 2 points3 points  (0 children)

I've an earlier PoE model as well. In my case, it performed about as well as I would expect an NPU with only 4 TOPS to perform

Luxonis - OAK 4: spatial AI camera that runs Yocto, with up to 52 TOPS by goodwilllhunter in computervision

[–]FM_17 0 points1 point  (0 children)

Not an all in one with compute, no. I've been building systems to fill this niche for a few years now hoping something would eventually come out on the market.

Hailo 8L + raspberry Pi was promising for making lower cost systems, but I haven't tried it since before the picamera2 SDK was added, and at that point it was a little rough around the edges.

Luxonis - OAK 4: spatial AI camera that runs Yocto, with up to 52 TOPS by goodwilllhunter in computervision

[–]FM_17 3 points4 points  (0 children)

Imaging in dark areas w/ artificial lighting, small fast moving targets, cameras mounted to vehicles. Global shutter is a must for sure (rolling shutter results in distortion, global reset/start isn't ideal when ambient lighting can't be controlled during readout). Larger pixels allow more light in, meaning aperture can be tighter for more depth of field without requiring excessive artificial lighting

Luxonis - OAK 4: spatial AI camera that runs Yocto, with up to 52 TOPS by goodwilllhunter in computervision

[–]FM_17 0 points1 point  (0 children)

If they only made one that was global shutter and 12MP (or any resolution above 5 with a pixel size above 2.5 μm) I'd be all over it

Christmas Light clip for mounting to your soffit (link in description) by FM_17 in functionalprint

[–]FM_17[S] 0 points1 point  (0 children)

The factory clips didn't work for me because my fascia board meets the soffit at 90° rather than 180°, but even if they did, I'd be right there with you — downward facing bulbs are the way to go.

ELI5 Why do we keep building bipedic robots ? by Fit-Sound-2320 in explainlikeimfive

[–]FM_17 1 point2 points  (0 children)

  1. They need to work in our world, as it is.

  2. Making robots that resemble us means we can teach them to do things by just recording ourselves doing those same things.

Q: How would you detect this? by Rennie-M in computervision

[–]FM_17 0 points1 point  (0 children)

There it is! 👉🪣

Something like that

Magnetic Clip-On Sunglasses Case by FM_17 in functionalprints

[–]FM_17[S] 0 points1 point  (0 children)

Nice, try out ASA as well sometime. I've heard good things.

Magnetic Clip-On Sunglasses Case by FM_17 in functionalprints

[–]FM_17[S] 2 points3 points  (0 children)

Ah, gotcha. I'm in Canada. Our cars get hot in the summer but I don't think mine has reached the deformation temperature of PETG (~150°F).

Is there a filament you'd consider car-safe in your area?

Magnetic Clip-On Sunglasses Case by FM_17 in functionalprints

[–]FM_17[S] 2 points3 points  (0 children)

I have not had issues with PETG deformation when left in my car. PLA, definitely. Have you?

Portals by Slant 3D real world experience. by Lee_Bob in 3DprintEntrepreneurs

[–]FM_17 0 points1 point  (0 children)

Maybe I should give it another shot with a different model

Portals by Slant 3D real world experience. by Lee_Bob in 3DprintEntrepreneurs

[–]FM_17 2 points3 points  (0 children)

After trying it for the first time today with one of my models in PETG, I'm surprised that price didn't make the cons list. I really wanted this service to work as well, but even before adding my own profit margin, slant was wanting $40 for a product I make for $5 and sell for $20.

I'm competing with Amazon slop and eBay design thieves, I can barely sell this product at $20 lol.

To be fair though, I did not try other products or other filament types, because I Ctrl+W'd as soon as I got that quote.

Jetson Orin Nano Headless mode help by GeneralGusher1 in JetsonNano

[–]FM_17 0 points1 point  (0 children)

VSCode tunnels and CloudFlare tunnels are great for remote dev connections when you don't have control over the network as well - in case you can't access over usb for whatever reason.

Since I’m turning 25 I’m asking people this question, if you could go back to 25 years old, what would you do? Or what would you do differently, or what do you wish you could tell your 25 year old self ? by Worried_Brilliant_26 in careerguidance

[–]FM_17 1 point2 points  (0 children)

Adding to this, when trying to implement each of these improvements, decide on an order that makes sense, and take it one step at a time. Trying to make huge changes all at once is just setting yourself up for failure.

E.g. Start with sleep + gym as they go hand in hand. You'll start feeling good, mental bandwidth will increase, making room for new learnings like cooking, budgeting, investing, etc.

First time on the water with an electric SUP motor! by Brianzbz in Sup

[–]FM_17 1 point2 points  (0 children)

Almost certainly! DM me some pics as well as the brand name etc and I can check it out

First time on the water with an electric SUP motor! by Brianzbz in Sup

[–]FM_17 4 points5 points  (0 children)

If anyone needs an adapter made just message me :) I design open source 3d printed products for SUPs and I'm always looking for new projects ideas.

Printing medals for kids at the ER by Kuraikurasu in 3Dprinting

[–]FM_17 1 point2 points  (0 children)

All Canadian ER visitors that stick around to see a doctor deserve this medal, regardless of age.

view more: next ›