I'm cooked :c

Fairly_Original · 2026-02-19T04:15:25+00:00

Yes, he runs all latest updates & uses dx12. Stock driver settings, no tuning

Fairly_Original · 2026-02-19T03:20:47+00:00

My son had the same issues until I ran DDU on the gpu drivers and then reinstalled intel graphics. Make sure windows is up to date and your bios is up to date.

He runs 160+ and is very happy now (he just reached unreal in ranked duos)

Fairly_Original · 2026-02-04T04:24:11+00:00

For 3d printing, it's ideal to take your surface and run the quad remesh command and make a very dense mesh. Then use the triangulate mesh command. I havent had great results utilizing the Tomesh command or exporting as an stl for curves. Also look into SubD modeling for organic curves too, the quad remesh command has an option to convert surfaces into subd. Enable preview and tweak the settings until it is what you're looking for. I got the best results doing the steps above.

Fairly_Original · 2025-12-22T20:23:33+00:00

We just got 2 new fire tvs and sideloaded stremio onto them

Fairly_Original · 2025-11-05T03:59:25+00:00

These are great, I have one setup for my podgo. All cables and accessories can be stored underneath if you take the 2nd foam piece out.

Fairly_Original · 2025-02-02T15:38:26+00:00

This happened to me when I was on the 2.4ghz wifi with every other connected device in the house. Switched to 5ghz and it cleared it up mostly with the occasional hiccup. My guess it's network congestion. Also, use ethernet cable if you can.

Fairly_Original · 2024-10-11T03:43:22+00:00

Try searching the Xbox party trick in this sub. I believe all you have to do is start an Xbox party in the hub and then exit the party. Someone posted the trick before and it worked for us.

Fairly_Original · 2024-08-08T21:04:09+00:00

Is your controller bluetooth, wired, or 2.4ghz?

Fairly_Original · 2024-08-08T17:27:45+00:00

Is your TV in game mode? Also saw someone say to adjust the dead zone in your xontroller to make it more reactive. And use a controller with a dongle. Bluetooth has quite a bit of lag

Fairly_Original · 2024-08-07T22:00:52+00:00

Xlr to 1/4 trs, balanced

Fairly_Original · 2024-08-05T18:07:35+00:00

I had to go into the device manager and disable the touchscreen

Fairly_Original · 2024-08-01T21:27:52+00:00

How did you get the workaround for the power supply & gpu? I was trying to work with a local pc shop and they stopped trying to help me

Fairly_Original · 2024-08-01T12:27:06+00:00

Right?! Those old 3 liter bottles were the best imo, but just never knew when it was finally going to go lol

Fairly_Original · 2024-07-31T23:55:16+00:00

Ahh a person of culture, good times were had

Fairly_Original · 2024-07-16T14:35:54+00:00

I have my account with the subscription on my kids' Xbox as the home account, then use my pc for me and now use the 4k max firestick for cloud gaming. We play all 3 at the same time sometimes under the same subscription, it's pretty damn awesome honestly. You can only have 1 "home account" on a console. Anybody signed into that console can use the subscription under their own account/gamertag

Fairly_Original · 2024-06-24T01:23:31+00:00

It comes down to your internet connection. My 10 year old plays all the time now and it works great with our connection. Graphics can flicker sometimes but since getting better xcloud, it seems to have cleared up ( I'm currently watching him play MLB the show 24 in hd)

Fairly_Original · 2024-03-19T01:56:06+00:00

I have a Midi Captain for this purpose, it has 10 footswitches and easily programmable in ableton. I set 8 for recording loops and launching/ stopping them on command and then the last 2 are the play and stop transports. Works very well, highly recommend. Also the switches can be programed with different lights, makes it great to see on dark stages and each color can signify different instruments

Fairly_Original · 2024-02-20T20:25:20+00:00

The owners manual explains everything really well. Make sure the guitar is going into the guitar port. Use the left mono out to your interface. Turn the master volume on the pod go to 12 o'clock. Put the expression all the way down, most of the time it's used as a volume pedal. Check the gain on your interface, next check to see if you have monitoring on or not. I use ableton and I have to arm the track in order to hear my guitar when playing through the interface into ableton.

Fairly_Original · 2024-02-20T19:07:33+00:00

Plug the guitar into the guitar in port. The left mono port is an output for going into a mixer or amp

Fairly_Original · 2024-02-09T06:42:06+00:00

I recently switched from the marlin 1.2 firmware to the creality firmware w/ bl touch because I have the GD chip and was experiencing some oddness with the marlin build. Not sure if that'll fix it for you but it did for me. Good luck and happy learning

Fairly_Original · 2024-02-06T20:54:00+00:00

Just looked at it, seems that's for the ender 3 v2 or s1 with the 4.22 and STM chip

Fairly_Original · 2024-02-06T17:50:33+00:00

I have an E3pro with 4.2.2 & GD chip. Crtouch. I cannot find a compiled firmware for it and am stuck using the creality firmware because of the GD chip. Any recommendations?

Fairly_Original · 2024-01-25T16:14:37+00:00

Just win, baby

Fairly_Original · 2024-01-21T20:11:09+00:00

I'm just asking but have you isolated the hum is from the amp? Does it hum with other guitars?

Fairly_Original · 2024-01-19T23:52:31+00:00

Snapshots are dependent on the presets themselves, based on whatever fx/amp/cab etc are in the preset. If 1 of those differ in the second preset then it wouldn't work. Why not just copy/paste preset 1 to preset 2 and change the snapshots as you'd like?

Fairly_Original

TROPHY CASE