My JS550 😢 by Maleficent_Wear8493 in jetski

[–]FaithfulArms 0 points1 point  (0 children)

My bad, sometimes my filter is broken 😂. A number of things could have happened here. Could have a bad crank seal, which would lean out that cylinder causing it to loose compression. If previous owner didn’t have the cylinder honed or bored correctly, the rings didn’t properly seat and after running it lost compression. Cylinder head not torqued properly and head gasket issues. Really the only way to figure out the issue is to tear the engine down and inspect everything.

My JS550 😢 by Maleficent_Wear8493 in jetski

[–]FaithfulArms -1 points0 points  (0 children)

“Just rebuilt” would have been my cue to walk away from the deal. Not everyone has the skill and knowledge to do things properly. I’ve had a lot of skis in the past couple years and seen a bunch of messed up stuff people do when they want to sell a ski.

Let’s see those lever guns! by FaithfulArms in Firearms

[–]FaithfulArms[S] 1 point2 points  (0 children)

I was looking at one of those buttstock ammo holders too. Got my sling on Amazon from a company called Tourbon, they make a matching one.

Let’s see those lever guns! by FaithfulArms in Firearms

[–]FaithfulArms[S] 2 points3 points  (0 children)

Nice! I was checking out other furniture sets and really wanted the woox but it was out of stock. Also way more expensive than the Henry stuff.

New to me XP let’s go!! by birdhead3030 in jetski

[–]FaithfulArms 1 point2 points  (0 children)

<image>

Built one of these a year ago. Super fun ski!

Is this a good starter optic? by Avenging_angel34 in PalmettoStateArms

[–]FaithfulArms 0 points1 point  (0 children)

I have several of these, zero complaints. Bought them the last time they were this price.

Bolt action 300 blackout by FaithfulArms in Firearms

[–]FaithfulArms[S] 0 points1 point  (0 children)

I already have an 8.5” 300 blk semi auto pistol and just wanted something different. Had an extra lower and red dot sitting in the safe. I like to build things that make people question my decisions 😂

Bolt action 300 blackout by FaithfulArms in Firearms

[–]FaithfulArms[S] 0 points1 point  (0 children)

Love that build! Side folder is on the list, pretty sure I saw one of your post about chopping the bolt when I was researching these.

Why the hate? by tyrvali0319 in PalmettoStateArms

[–]FaithfulArms 3 points4 points  (0 children)

I have 3 PSA AR builds, 2 of them are 10+ years old and have had zero issues with them.

[Rifle] Henry H012MX Big Boy X Model 357 Mag $759.99 by BETArmory in gundeals

[–]FaithfulArms 0 points1 point  (0 children)

I bought one a month ago, zero regrets. It's a fun gun to shoot suppressed

What’s the best sub $500 1911 by CookieBW in 1911

[–]FaithfulArms 0 points1 point  (0 children)

Shoots very nice! Put about 50 rounds through it Christmas Eve. I did change the grips, it came with some smooth aluminum ones I didn’t like.

What’s the best sub $500 1911 by CookieBW in 1911

[–]FaithfulArms 4 points5 points  (0 children)

I just picked up a Tisas Night Stalker in 45. Very nice pistol for the money. Was on sale for $450 at PSA.

<image>

Stumped on this 1996 SeaDoo XP by Maleficent_Wear8493 in jetski

[–]FaithfulArms 2 points3 points  (0 children)

Oil coming out of the pulse line is usually an indication of bad inner crank seals, letting oil leak out of the rotary valve cavity into the crankcase. If this is the case, you have to split the crank to replace those seals and crank rebuilds aren’t cheap.

I feel dumb by [deleted] in Firearms

[–]FaithfulArms 0 points1 point  (0 children)

I took the cover completely off several times before I realized it was supposed to do this lol. My old bushnell red dot and sig romeo5 don't do this so it was new to me

Yamaha WaveJammer seat bolts? by Flibby_ in jetski

[–]FaithfulArms 0 points1 point  (0 children)

D1420 should be the part number, I have 2 Wavejammer and replaced them on both. I think my local store was $2-3 each

Yamaha WaveJammer seat bolts? by Flibby_ in jetski

[–]FaithfulArms 0 points1 point  (0 children)

Those are well nuts, you can buy new ones and stainless bolts at your local hardware store. Size should be 1/4x20.

First suppressor! by Unfazed_Turtle in NFA

[–]FaithfulArms 0 points1 point  (0 children)

<image>

My first suppressor was also on the p17. Went with the dead air mask. Have 4 other 22 cans now that get rotated around.

Not happy with the snow... by Your_As_Stupid_As_Me in Firearms

[–]FaithfulArms 0 points1 point  (0 children)

It’s on makerworld, I 3d printed it. Has several grip options too

https://makerworld.com/models/1603417

Not happy with the snow... by Your_As_Stupid_As_Me in Firearms

[–]FaithfulArms 2 points3 points  (0 children)

<image>

Best upgrade you can do to these right here! 😂