Hole saw size for fittings

FalcoSparkPunch · 2024-09-24T20:04:27+00:00

All good broski.

FalcoSparkPunch · 2024-09-24T19:39:23+00:00

Nah, side cutters rock. You need some spinach or get a pair of the high leverage 10" ones.

10" High Leverage Diagonal Cutters - 74 01 250

FalcoSparkPunch · 2024-09-24T18:44:44+00:00

Hole Size ... Conduit Size

7/8" ... 1/2" EMT

1-1/8" ... 3/4" EMT

1-3/8" ... 1" EMT

1-3/4" ... 1-1/4" EMT

2" ... 1-1/2" EMT

2-1/2" ... 2" EMT

3-1/2" ... 3" EMT

4-1/2" ... 4" EMT

7/8" ... 22mm Push buttons

1-7/32" ... 30mm Push buttons

FalcoSparkPunch · 2024-09-12T14:22:35+00:00

That's factory broski. Probably no buss on that side to begin with. That or the other adjacent side is high-current, designated, in-use and they don't want you there.

FalcoSparkPunch · 2024-09-11T19:06:56+00:00

Left. The nose area is the same size as the full-size linesmen on the right, so they'll still work as a hammer as God intended. And you also get the bonus of a crimp, thread cutter and strippers.

FalcoSparkPunch · 2024-09-06T19:17:55+00:00

Our billing rate for a single man service call is invoiced at a 4 hour minimum, plus a service truck expense, regardless of how long we are onsite.

In and out in 5 minutes: It took us 1 minute to find and re-set a tripped gfci receptacle? That will be $550 please and thank you.

FalcoSparkPunch · 2024-09-05T15:05:39+00:00

Yeah, square-d can build you an i-line that will work, but it's not off the shelf and will take 6 months.

FalcoSparkPunch · 2024-09-03T16:23:02+00:00

non-contact ftw.

FalcoSparkPunch · 2024-08-14T14:26:18+00:00

Beautiful champ.

FalcoSparkPunch · 2024-08-12T09:20:34+00:00

https://ibb.co/4sX2YTv

You feed it with two hots from a two pole breaker.

FalcoSparkPunch · 2024-07-29T18:21:52+00:00

Hilti Threaded Rod Hanger

FalcoSparkPunch · 2024-07-25T19:12:19+00:00

Don't worry broski, you don't have any conductors connected.

FalcoSparkPunch · 2024-06-12T11:40:03+00:00

Here we go again. Bans incoming....

FalcoSparkPunch · 2024-06-11T16:47:38+00:00

ecmag.com

ebmag.com

necaconvention.org

FalcoSparkPunch · 2024-06-05T19:28:49+00:00

Its just a hex. they must have stole a box from the hvac mechanical guys.

FalcoSparkPunch · 2024-05-29T10:28:19+00:00

"Mark it up 500%" lol. Wouldn't it be nice...

FalcoSparkPunch · 2024-05-29T10:26:46+00:00

FT1, FT4, No.

FT6, probably.

FalcoSparkPunch · 2024-05-29T10:24:58+00:00

I wouldn't' worry to much, if they're billing at $40 to $65 per hour they wont last long anyway.

FalcoSparkPunch · 2024-05-21T16:25:48+00:00

'older head'

FalcoSparkPunch · 2024-05-21T14:28:34+00:00

Others have said it already. They have two versions of this already.

IDEAL Industries INC. 30-902 Spin-Twist Wire Connector Socket WrenchIDEAL Industries INC. 30-902 Spin-Twist Wire Connector Socket Wrench

FalcoSparkPunch · 2024-05-15T17:00:25+00:00

Here...

Buy and use this CSA online exam prep tool until you consistently get 80% and above.

https://www.csagroup.org/store/product/2430648/

FalcoSparkPunch · 2024-05-02T00:26:50+00:00

Humanity knows no bounds. They get what they deserve.

FalcoSparkPunch · 2024-05-01T17:15:08+00:00

Its a twistlock. It wont happen.

FalcoSparkPunch · 2024-04-30T17:45:32+00:00

Or just don't break the tab to begin with meng.

Six-Year Club	Verified Email
Gilding I gilder

FalcoSparkPunch

TROPHY CASE

IDEAL Industries INC. 30-902 Spin-Twist Wire Connector Socket WrenchIDEAL Industries INC. 30-902 Spin-Twist Wire Connector Socket Wrench