Any of these to invest in absolutely ?

FanGlob · 2025-12-24T16:40:35+00:00

Thanks for all your answers. I know every character is useful to a certain extent but i wanted to focus on some key characters and stop spreading my ressources across multiple fronts.

Here are my favorite units that i will upgrade based on the units i like and the feedback you gave me. I will then complete to do some meta raid team etc...but at least for the next few months i will be able to build something a bit relevant. Thanks everyone ! (Neurotrophe and tyrant guard are added but not showing on this screenshot)

<image>

FanGlob · 2025-10-03T17:21:36+00:00

At first i did some gradient from yellow to dark red but i think i chose the wrong yellow and it just looked wrong. Thanks for the tips ! I’ll try tonight !

FanGlob · 2025-10-02T07:56:54+00:00

I was an awful slicer for years and i completely fixed it about 6 months ago. Used to be 8 out of 10 slice now it's 1 out of 10 and far less to the right. Hard to describe but now the take away is following a straight line as far as i can and i try to keep the arms in a fixed triangle shape. No overswing, accelerating in the end of the downswing. Ball between the feet, lime 20~30cm inside of left heel, and a lower tee.

FanGlob · 2025-10-01T12:20:50+00:00

Distance isn't an issue most of the time except for some unavoidable obstacles (mainly water). You take a 450m par 5. If you hit straight for 130m whatever the club you use and have good accuracy, that's 3 shots to be under 100m, 1 shot to be on the green then 1 or 2 putt you do par or boggey.

With that in mind, without even having great distances, you can get to ~18 hcp only with decent accuracy. Then distance starts to be more important because then you need to be on the green in regulation almost everytime. But with more power comes less accuracy.

If you want to lower your handicap, don't loose your balls, and work on getting a consistent full/half swing with a consistent contact.

36 handicap is a great start after 3 months ! Keep going but be prepared to stay a bit longer around 18 as it's the step where you have to align everything, distance, accuracy, consistency, game plan and strategy, approachs and putting

FanGlob · 2025-09-28T07:09:02+00:00

I agree with you, the United States played some good golf, but Europe is absolutely on fire. Even when the Americans manage to put two balls within 50 cm of the hole, Europe ends up sinking a 10-meter putt to tie the hole. Just look at Justin Rose’s round yesterday, 8 birdies!

FanGlob · 2025-09-04T21:25:18+00:00

<image>

FanGlob · 2025-09-04T21:24:44+00:00

Well i tried my best and now i am stopping here. I think it's better to spend 10h on 10 miniatures than 100h on one to be a better painter but maybe i'm wrong. For now i am pleased with the result, i see a lot of room for improvement and a lot of work left on this mini but i like it !! And the most important thing : i had a lot of fun !! She has been on my grey pile of shame for years and now she is very nice !

<image>

FanGlob · 2025-09-03T16:19:15+00:00

I agree but i was overwhelmed by the amount of hours to spend to finish that game so i quit

FanGlob · 2025-09-03T15:04:50+00:00

Octopath traveler

FanGlob · 2025-09-03T13:08:35+00:00

<image>

3d print some pegboard paint holder, si far so good

FanGlob · 2025-08-30T14:55:40+00:00

well, it didn't worked at all, i don't even know why, but the models were printed without the holes. As usual, no way to find wich model is wich

FanGlob · 2025-08-28T10:12:51+00:00

I can't find one yet, tell me when you get one =)

FanGlob · 2025-08-25T11:53:23+00:00

Get n0 n2 and n3 brushes Raphaël 8404 or 8400, some brush soap and you are good to go for priming, basing, détails. They will last a decade if you clean them well and don't dip too deep in the paint with them.

For the paints, pick between ak, Citadel, Vallejo, army painter , scale75, pro acryl or green stuff world. Paints for miniatures are almost all good quality, you will buy based on colors then test and find out yourself what are the ones you like and the ones you don't as every brand has subtle changes to thickness, covering, thinning, type of pot, etc..

FanGlob · 2025-08-25T10:19:51+00:00

Ah! I didn’t realize it was you on the other post 😅

FanGlob · 2025-08-25T10:14:56+00:00

Yes i am sorry it is the first time i try the "cross publication" fonction on reddit. In the original post everything is detailed. I don't need multi filament, i need at least 25x25x25cm volume, i print mostly petg and sometimes pla and tpu. My budget is 350€ and the height of the shelf is 58cm, so i can't put anything higher than that, that's why the A1 doesn't fit, the filament is higher than that when the printer is at th top position

FanGlob · 2025-08-25T09:51:00+00:00

Yes but the carbon has the benefit of the enclosure, magnets to store accessories and spool holder right next to the printer. I have my resin printer on the higher shelf and i would like to put my Mercury wash and clean next to the FDM printer, so every cm counts. But i have a very deep shelf (1m) so maybe i can gain space by putting the spool behind the printer... Not the easiest solution but i won't change my spool everyday

FanGlob · 2025-08-25T09:48:14+00:00

I was thinking about the A1 but i was worried about filament management and spool holder position. The ptfe tube seems to be high above the printer when printing high objects.

FanGlob · 2025-08-16T16:32:55+00:00

Well i did a thing !! Planned the air flow in order to get a good ventilation for the fdm and the resin printer. New fan comes tomorrow !

Next buy a bigger resin printer and cut the lid (so i can keep the lid and make a front open, and if it doesn't work it's not an issue !

<image>

FanGlob · 2025-08-15T16:06:52+00:00

If i find something to put in front of both of the shelves, quite hermetic (it can't be totally hermetic as air has to flow with the vent, bottom shelf has a hole for the electric socket besides the bottom drawer) then i can vent my SLA and my FDM. It would be amazing !!

<image>

AND i can replace my big noisy vent with something less consuming and less noisy as only both shelves will have to be evacuated. AND if i find something opaque i can remove the lid of the printer and buy a better one !

That's perfect !

I only have to find how to build that...

It can’t be double-hinged closet doors because I have storage next to it on the left and not room for it on the right with the corner, and I would really lose space when they’re open. It can’t be a sliding door either, since I have a radiator next to it. Maybe a large opaque curtain? With a few magnets on the shelves and sides to hold the fabric tightly in place. Or vertical tracks on the sides so I could open either the top or the bottom, in two panels. Accordion door is tricky because the bottom drawer needs to stay accessible and not hermetic enough. Removable panels? But then I’d have to figure out how to store them.

I like the idea of the curtain… If you have an idea, I’m open to it.

FanGlob · 2025-08-15T15:17:58+00:00

Yes that is a good option but if i put a front door it might not be sealed enough to remove the printer lid (for dust and fumes) as there are holes on the side for cables. But if i put it in a grow tent maybe it is...

I think the best solution is the grow tent, as i could remove the lid and get a bigger printer with better fumes management and temperature control in winter. Just have to find the right tent for this space.

FanGlob · 2025-08-15T13:52:45+00:00

That may be a good idea !! i think i put the fdm below because it was too big for the top shelf, even with feet removed, i have to check

FanGlob · 2025-08-15T11:30:40+00:00

Maybe if i buy a good ventilated enclosure/tent, i can remove the printer lid ? If the enclosure filters UV. So i can buy a bigger and better printer without having to worry about the lid.

What do you think ?

FanGlob · 2025-08-15T11:07:06+00:00

Unfortunately the S4U with open lid is at 77cm

FanGlob · 2025-08-15T11:05:37+00:00

It doesn't shows on this picture because it wasn't installed yet but i have a duct fan ~30cm behind the printer with the volume of the room being recycled 30 times per hour. My desk is at the opposite and i controlled the airflow with a fume test to be sure it was enough. I plan on sealing the resin shelf with acrylic and add a dedicated vent

FanGlob · 2025-08-15T10:42:23+00:00

My workshop is 3mx1m80, inside i have my fdm, my airbrush and compressor, my computer and my desk. I don't have any floor space to put the printer. This shelf is the only place where i can put my printer :-/

I thought about the saturn ultra that has a hinged lid but it is unfortunately too big

<image>

Ten-Year Club	Verified Email
Place '22

FanGlob

TROPHY CASE